1015-01-340-7741 12592451 Plate,Catch 100 5365-01-485-9572 12592459 Spacer,Plate 0 5365-01-485-9567 12592458 Spacer,Plate 0 1015-01-341-0472 12592632 Bracket,Gun 25 1015-01-342-2422 12592449 Plate,Keeper 0 5340-01-483-7806 12593137 Bracket,Angle 0 5365-01-341-8564 12592775 Shim 50 The items to procure is a THE GEAR SECTOR SHIM IS USED ON THE M119A1/A2 AND IS MADE FROM STEEL ASTM A 1008/A1008M. OVERALL DIMENSIONS ARE 2.58 X 1.87 X .0625. THERE ARE TWO (2) .505 DIA HOLES AND ONE (1) 1.005 DIA HOLE. PHOSPHATE COATING REQ'D. THE CATCH PLATE IS USED ON THE M119A1/A2 AND IS MADE FROM STEEL, ASTM A108 OR A576. OVERALL DIMENSIONS ARE 1.62 X 2.37 X .123 INCHES. THERE ARE TWO (2) .26 X .41 INCH SLOTS AND A .50 INCH DIAMETER HOLE. PHOSPHATE COATING REQ'D. THE BRACKET IS USED ON THE M119A1/A2 AND IS MADE FROM STEEL, ASTM A108 OR A576 .25 THK. OVERALL DIMENSIONS ARE 4.50 X 1.930 X 1.25 INCHES. THERE ARE TWO (2) .3765 DIA HOLES. PHOSPHATE COATING REQ'D. THE SHIM IS USED ON THE M119A1/A2 AND IS MADE FROM SHIM STOCK, LAMINATED CRES .020 THK. OVERALL DIMENSIONS ARE 6.75 X 2.87 INCHES. THERE ARE FOUR (4) .635 DIA HOLES. THE KEEPER PLATE IS USED ON THE M119A1/A2 AND IS MADE FROM STEEL ASTM A 1008/A1008M. OVERALL DIMENSIONS ARE 3.55 X 0.90 X .036. THEREIS ONE (1) .44 DIA HOLE AND ONE (1) .44 X .59 SLOT. PHOSPHATE COATING REQ'D. THE INDICATOR BRACKET IS USED ON THE M119A1/A2 AND IS MADE FROM STEEL, ASTM A109/A109M T2 A1008/A1008M. OVERALL DIMENSIONS ARE 3.43 X 1.367 X 2.029 INCHES. THERE ARE TWO (2) .016 DIA HOLES; TWO (2) .411 DIA HOLES AND ONE (1) .318 X .448 INCH SLOT. PHOSPHATE COATING REQ'D. THE GEAR SECTOR SHIM IS USED ON THE M119A1/A2 AND IS MADE FROM STEEL ASTM A 1008/A1008M. OVERALL DIMENSIONS ARE 4.12 X 1.50 X .0625. THERE ARE TWO (2) .505 DIA HOLES AND ONE (1) 1.005 DIA HOLE. PHOSPHATE COATING REQ'D. . FOB is Destination. For use on the119 Howitzer. Estimated issue date is 2007 Nov 27. This solicitation will be issued electronically in accordance with FAR 4.502 and 5.102, therefore, hardcopies will not be provided. Vendors wishing an electronic cop y may download it on or after the issue date by accessing the following address via the internet: https://aais.ria.army.mil/aais/SOLINFO/index.htm CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidders mailing list. It is therefore incumbent upon any interested parti es to periodically access the above internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for bid opening/receipt of proposals may render your bi d or proposal nonresponsive and result in the rejection of same. Proposed contract is 100% small business set-aside. All or a part of this action is an unfunded FY08 requirement.

Bid Protests Not Available