1. This is a combined synopsis/solicitation for commercial services/items prepared in accordance with the format in FAR Subpart 12.6 in conjunction with FAR Part 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. 1.A. Project Title: Maintenance Equipment 1.B. Project Location: VA Loma Linda Healthcare System Attn: Warehouse, 11201 Benton Street, Loma Linda CA 92357-1000 1.C. Solicitation Type - Number: Request for Quotes (RFQ) - 36C26223Q0676 1.D. Set Aside: This solicitation is 100% set aside for SDVOSB 1.E. Applicable NAICS code: 811198, All other Automotive Repair and Maintenance 1.F. Small Business Size Standard: $9 million 1.G. Type of Contract: Firm Fixed Price 1.H. Period of Performance: 60 days from Award 2. Key solicitation milestones are: 2.A. Submit any questions regarding this procurement via email to [email protected] no later than 12:00 Pacific Local Time, March 14, 2023. No questions will be answered after this date/time unless determined to be in the best interest of the Government as determined by the Contracting Officer. Telephonic questions will not be accepted or returned. RFI responses will be responded to as necessary in amendment format which will be posted to contract opportunities at http://SAM.gov. 2.B. Submit written offers in accordance with the following instructions, as well as Addendum to FAR 52.212-1, Instruction to Offerors. Oral offers will not be accepted. Complete and submit the enclosed SF 1449 via email no later than 15:00 Pacific Local Time, March 17, 2023, to [email protected] . Ensure the following are completed and/or included in the offer packet: 2.B.1. SF 1449 page 1, 2.B.1.a. Section B.1 - Vendor Information with SAM UEI Number 2.B.1.b. Section B.1 - Acknowledgement of amendments 2.B.1.c. Section B.3 - Schedule of Supplies identifying specific manufacturer and model number being offered 2.B.1.d. Section B.4 - Delivery Schedule 2.B.1.e. Section C.4 - VAAR 852.219-78 VA Notice of Limitations on Subcontracting- Certificate of Compliance of Supplies and Products 2.B.1.f. Section E.5 - FAR 52.212-3 Offeror Representations and Certifications Commercial Items

SALIENT CHARACTERISTICS: Equipment must have the salient characteristics to enable the government to perform the capabilities:

Sheet Metal Brake (HB-4816) QTY 1

• Must have 2 material clamps rotate on cams to lift and drop the beam and clamp the sheet metal
• Must have Adjustable blade gap lets you account for different material thicknesses.
• Must have 2 material clamps rotate on cams to lift and drop the beam and clamp the sheet metal
• Blades and bending bars must be replaceable
• Sheet Metal Brake Brake Type Straight Actuation Hand Lever
• Maximum Bend Angle 135 Degrees Angle Gauge
• Sheet Capacity Aluminum 12 ga, Mild Steel 16 ga , and Stainless Steel 20 ga

Band Saw, Combination, 145 to 245 SFPM (413460) QTY 1

• Must have heavy-duty geared head transmission for quick speed changes
• Must have 8” wheel and a handle for easy movement
• Must have a coolant system
• Must have a built-in, self-propelled blade brush to extend the life of the blade
• Band Saw Band Saw Type Combination Horizontal/Vertical Band Saw Operation Manual Voltage 115/230V AC Phase 1
• Rectangular Cutting Capacity
•  Horizontal 8 in x 11 1/4 in Throat Depth
• Vertical 12 in
• Round Cutting Capacity –
• Horizontal 5 in
•  SFPM Range 145 to 245
• Miter Angle Range 45 Degrees to 90 Degrees

Miller Diversion 180 TIG Welder QTY 1

• Must have Auto-postflow adjusts the length of postflow time based on the amperage setting, shielding your tungsten and eliminating the need to set the postflow time
• Must have High frequency arc starting provides non-contact arc initiation that reduces tungsten and material contamination
• Must have Fan-On-Demand™ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through the machine
• Must have Inverter-based, AC/DC power source provides a more consistent welding arc while using less power. DIVERSION 180, AC/DC TIG, 115-230VAC

Jet Mill Drill Stand for 18F193/4/5 (350045) QTY 1

• Must be able to hold Jet Mill Drill Machine Model 350017

Mill Drill Machine, Manual, 1hp, 120/240V (350017) QTY 1

• 360°Head Swivel; Belt Cover; Cast Iron Column; Large Hand Wheel Knobs; Quick Slide Latch; Quick Stop Knob Must have a locking collet to prevent the cutting tool from falling away from the spindle when lateral forces are experienced against the bit
• Must have a belt cover with a quick side latch to allow for a faster belt adjustment to change spindle
• Adjustable Carbide Facemill; Arbor; Chuck; Chuck Guard; Draw Bar; Work Light
• Table Work Surface 7-1/2 in x 23 in
• Drilling Capacity Steel 1 in
• Spindle Speed 110 to 2580 rpm
• Motor Horsepower 1 hp

Forklift Cylinder Caddy (39J512) QTY 1

• Must hold 4 Cylinders
• Dimensions must be at least 34”W x 41”H x 23”L
• Cylinder Capacity 4
• Capacity 1,500 lb
• Tank Dia. 9 in

FUNCTIONAL AND PERFORMANCE CHARACTERISTICS: Equipment must provide functional and performance capability as listed above in section in above.