Federal Bid

Last Updated on 23 Jul 2010 at 8 AM
Sources Sought
Fort monmouth New jersey

58--FMS Case S4-B-UBI (State Department) for PVS-14 GEN II NTE 1250 FOM

Solicitation ID MARKET-SURVEY-4852-1
Posted Date 20 May 2010 at 2 PM
Archive Date 23 Jul 2010 at 5 AM
NAICS Category
Product Service Code
Set Aside No Set-Aside Used
Contracting Office Not Specified
Agency Department Of Defense
Location Fort monmouth New jersey United states 07703
FOR MORE INFORMATION PLEASE CONTACT John Padre, EMAIL [email protected]

NOTE: THIS IS AN AMENDMENT TO MARKET SURVEY 4848-1. ONLY GEN II Image Intensifier Tubes are accepted.
The US ARMY CECOM LCMC intends to acquire 47 each PVS-14 Night Vision Goggles GEN II not to exceed 1250 FOM. Each PVS-14 includes the following: headset, headset adapter, demist shield, sacrificial filter, soft carrying case, lens paper, operators manual, and battery.

Salient Characteristics:

Signal To Noise (minimum): 19
Resolution (minimum): 45 lp/mm

Magnification: 1X (3X or 5X Optional)

Lens System: 26 mm f1.2

Field of View: 40 degrees

Field of View @ 1000 yards: 2184 feet

Field of View @ 1000 meters: 728 meters

Range of Focus: 10 to infinity, 25 cm to infinity

Detection Range: 1148 feet or 350 meters

Recognition Range: 984 feet or 300 meters

Diopter Adjustment: +2 to -6

Weather Resistant: Waterproof 3 feet for 30 minutes

Camera/Camcorder Adaptable: Yes

IR Illuminator: Yes

Battery Type/Life: AA (x1)/ 30 hours

Dimensions: 4.5 x 2.25 x 2 or 114 mm x 57 mm or 50 mm

Weight: 13.8 oz or 392 grams

Operating Temperature: -60 degrees Fahrenheit to 125 degrees Fahrenheit or -20 degrees Celsius to +45 degrees Celsius

Tube Data Sheet

Other information/requirements:
1. Figure of Merit must not exceed 1250 FoM, minimum for Tube Signal to noise Ratio of 19 and minimum Resolution of 45.
2. If you are a reseller/distributor you MUST disclose the manufacturer of the Tubes.
3. You MUST state delivery ARO of all HARDWARE.
4. If you are a reseller/distributor you MUST disclose the manufacturer of the Country of origin of ALL ITEMS listed. You must disclose WHO the contractor is that manufactures/produces tube housings and cases.
5. If you are a reseller/distributor you MUST disclose the manufacturer of the Country of origin of ALL ITEMS listed. You must disclose WHERE the contractor is that manufactures/produces tube housings and cases.
6. If you are a reseller/distributor you MUST provide certification that Night Vision Tubes are NOT Russian made.
7. For numbers 4-6 above, you MUST reference the case number on your formal solicitations.
Respond to My Attention by 11 am Eastern on 24 May 2010, phone at 732-532-863, EMAIL: [email protected]

US Army C-E LCMC Acquisition Center - DAAB07

US Army C-E LCMC Acquisition Center - DAAB07 ATTN: AMSEL-AC, Building 1208 Fort Monmouth NJ
07703-5008
US
Bid Protests Not Available