Sources Sought Notice
The Department of Veterans Affairs Medical Center, VISN 6 Network Contracting Office (NCO), on behalf of the Durham VA Medical Center is conducting market research through this Sources Sought Notice to seek Service-disabled veteran-owned small business (SDVOSB), Veteran-owned small businesses (VOSB) and/or small businesses sources to provide the CareFusion manufactured kit. The stainless steel instruments are used for grasping, cutting, holding tissue, occluding vessels as required during the course of the surgical procedure. The instruments have been selected for size and design as needed for specific purposes during the surgery. The vascular instruments have been specifically selected for jaw design to occlude or partially occlude vessels during vascular procedures. Forceps are specially designed for grasping vessels.
CH5902
DEBAKEY TISSUE FORCEPS REG 2MM TIP 7-3/4
CH5904
DEBAKEY TISSUE FORCEPS REG 2MM TIP 9-1/2
CH5887
DEBAKEY-DIETHRICH TISSUE FORCEPS 1MM TIP
NL1400
ADSON FORCEPS 1X2 TEETH SERR DEL 4-3/4IN
SU2332
TISSUE FORCEPS 1X2 TEETH OVER LGTH 5-3/4
SU2700
HALSTED MOSQUITO FORCEPS 5IN STR
SU2702
HALSTED MOSQUITO FORCEPS 5IN CVD
SU2730
CRILE ARTERY FORCEPS 5-1/2IN STR
SU2735
CRILE ARTERY FORCEPS 5-1/2IN CVD
SU4055
ALLIS TISSUE FORCEPS 5X6 TEETH 6IN
SU2760
PEAN ARTERY FORCEPS 6-1/2IN CVD
SU10531
GEMINI ARTERY FORCEPS FINE J CVD 7IN
SU10530
GEMINI ARTERY FORCEPS FINE J CVD 5-1/2IN
MO1700
BOETTCHER TONSIL ART FORCEPS SLT CVD JAW
CH6098
DEBAKEY RING-HNDL BULLDOG STR ANGLE JAW
CH6200
COOLEY PERIPH VASC CLAMP 6CM JAW 55DEG
CH6950-005
COOLEY X-SMALL CLAMP PART OCC JAW
CH6950-003
COOLEY X-SMALL CLAMP CVD SHANK ANG
CH6568
COOLEY ANASTOMOSIS CLAMP JAW 19X6MM
CH6225
COOLEY DBL-ANG JAW CLAMP 3.8X7.6CM 60DEG
CH6201
COOLEY PERIPH VASC CLAMP 4.4CM JAW 45DEG
SU2900
BACKHAUS TOWEL FORCEPS 3-1/2IN
SU2905
BACKHAUS TOWEL FORCEPS 5-1/4IN
MO1601
VITAL METZ DISCT SCISSOR CVD BL/BL 7IN
MO1600-S
METZENBAUM SCISSORS SUPER CUP CVD 7IN
CH2034
METZ SCISSOR CVD BLADE BL/BL 8IN
SU1814-002
VITAL MAYO DISCT SCISSOR CVD W/RND BLADE
SU1804-002
VITAL MAYO DISCT SCISSOR STR W/RND BLADE
CH2424
VITAL CRILE-WOOD NDL HOLDER STR JAW 8IN
SU16005
VITAL CRILE-WOOD NDL HLDR 3600 TEETH 6IN
CH2508
VITAL RYDER NDL HLDR SERR INSERTS 7IN
CH2509
VITAL RYDER NDL HLDR SERR INSERTS 8IN
CH5580-001
GARRETT VASC DILATOR TIP SZ 1MM 8-1/8IN
CH5580-002
GARRETT VASC DILATOR TIP SZ 1.5MM 8-1/8
CH5580-003
GARRETT VASC DILATOR TIP SZ 2MM 8-1/8IN
CH5580-004
GARRETT VASC DILATOR TIP SZ 2.5MM 8-1/8
CH5580-005
GARRETT VASC DILATOR TIP SZ 3MM 8-1/8IN
CH5580-006
GARRETT VASC DILATOR TIP SZ 3.5MM 8-1/8
CH5580-007
GARRETT VASC DILATOR TIP SZ 4MM 8-1/8IN
CH5580-008
GARRETT VASC DILATOR TIP SZ 4.5MM 8-1/8
CH5580-009
GARRETT VASC DILATOR TIP SZ 5MM 8-1/8IN
RH750
FREER SEPTUM ELEV DBL-END SH/BL 7-3/4IN
NL2491
DANDY NERVE HOOK STR OVER LGTH 8-1/2IN
GL500
GELPI PERINEAL RETRACTOR OVER LGTH 7-1/4
SU3786
SENN RETRACTOR BLUNT DEL DBL-END 6-1/4IN
MO420
DAVIS RETRACTOR DOUBLE-ENDED BLADES
CH1030
HENLY RETR SET W/3PR SIDE & 4PR CTR BLDS
CH1030-001
HENLY RETRACTOR CENTER BLADE 3/4X5/8IN
CH1030-002
HENLY RETRACTOR CENTER BLADE 1X5/8IN
CH1030-003
HENLY RETRACTOR CENTER BLADE 1-1/4X5/8IN
NL1003
CUSHING STR RETR PLAIN EDGE LGTH 8-3/4IN
SU3660
USA RETRACTOR DBL-END 8IN 2/ST
OS5531
BABY WEITLANER RETR 2X3 PRONG BLNT 4-1/4
SU3112-001
WEITLANER RETR 3X4 BLUNT PRONGS 6-1/2IN
SU3114-001
WEITLANER RETR BLUNT PRONGS 8IN
SU3490-001
RICHARDSON-EASTMAN RETR SMALL DBL-END
SU3490-002
RICHARDSON-EASTMAN RETR LARGE DBL-END
New equipment only, no remanufactured or gray market equipment is acceptable. Equipment
must be covered under manufacturer s warranty.
The North American Industry Classification System (NAICS) Code for this acquisition is 339112 and the Classification code is 6515. All information is to be submitted at no cost or obligation to the Government.
Interested parties should submit with their response the following information: Company information including point of contact; DUN#; business size and economic category (example: SDVOSB, VOSB, WOSB, SB); and if your company is an authorized distributor for the manufacturer - provide a letter from the manufacturer that confirms your status as an authorized distributor.
If interested party has a FSS contract - please include contract number, and whether the equipment is on the contract.
The capability statements received from this market research are for planning purposes only and will assist the Government in planning its acquisition strategy. This is strictly market research and the Government will not entertain questions concerning this market research. The Government will not assume any costs incurred by the contractor in the preparation of responses. Please email this information to
[email protected] no later than 09:00AM June 15, 2017. Phone inquiries will not be accepted.
See Attachment VA246-17-Q-1269
Bid Protests Not Available