COMBINED SYNOPSIS/SOLICIATION VA246-17-Q-1845 Zeiss Lumera 700 equipment (I)This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation for this action. Quotes are being requested, and a written solicitation will not be issued. (II)This solicitation is issued as a Request for Quote (RFQ). Submit written quotes on RFQ VA246-17-Q-1845 (III)The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. (IV) Any amendments issued to this combined/synopsis will ONLY be available on the FBO website (www.fbo.gov). (V) The Network Contracting Office 6-SAO East intends to award a firm-fixed price contract for the VAMC SALISBURY NC 28144-2516. (VI) The North American Industrial Classification System (NAICS) code for this procurement is 334510 with a small business size standard of 1250 employees. This procurement is a set-aside for SDVOSB and all eligible offerors may submit quotes. All offerors must be registered in System for Award Management (SAM) at http://www.sam.gov to be considered for an award of a federal contract. The record must be complete and not missing elements such as representations and certifications. All SDVOSB s must be listed and registered in Vetbiz.gov to be considered for award. (VII) Questions concerning this solicitation shall be addressed to Audrey Wooten Contract Specialist, and emailed to [email protected]. All questions or inquires must be submitted no later than 4:00 pm Eastern Standard time on 9/1/2017. No phone call will be accepted. (VIII) The Government will award a contract resulting from this RFQ to the responsible offeror whose quote is the lowest price technically acceptable. Quotes are due by 1pm. Eastern Standard time on 9/5/2017 Quotes received after this date and time will be considered late in accordance with 52.212-1(f) and will not be evaluated. Quotes shall be submitted via email to [email protected] (IX) This combined solicitation/synopsis is for the purchase of the following commercial items: Price schedule ITEM INFORMATION 305953-9900 000 LUMERA 700 FLOOR STAND 2 EA _______________ Meeting Characteristics 302681-9100 000 CARL ZEISS |MEDITEC, INC. |ASST SCOPE W |ELECTRIC ZOOM |LUMERA| 700 2 EA _______________ Meeting Salient Characteristics 302681-9023000 CARL ZEISS |MEDITEC, INC. |SCI ILLUM LUMERA |700 WITH ASSIST |SCOPE 2 EA _______________ Meeting Salient Characteristics 304977-9023-000 CARL ZEISS |MEDITEC, INC. |SL EYE LIGHT |SOURCE WITH |HAMODE| FILTER 2 EA _______________ Meeting Salient Characteristics 304970-9020 000 CARL ZEISS |MEDITEC, INC. |FOOT CONTROL |PANEL WIRELESS |(FCP| WL) 2 EA _______________ Meeting Salient Characteristics 304970-8760-000 CARL ZEISS |MEDITEC, INC. 6M CABLE FOR |FOOTSWITCH| 2 EA ______________ Meeting Salient Characteristics 303797-9140 000 |7 CARL ZEISS |MEDITEC, INC. |ELECTRICAL |INVERTERTUBE| 2 EA _______________ Meeting Characteristics 305810-9001000 CARL ZEISS MEDITEC, INC. ASEPSIS SET 22 MM | 6/BX 2 EA _______________ Meeting Salient Characteristics 305542-0000- 000 CARL ZEISS |MEDITEC, INC. | |WIDEFIELD, |PUSH-IN EYEPIECE |10X| 4| EA _______________ Meeting Salient Characteristics 302651-9905-000 CARL ZEISS |MEDITEC, INC. |OBJECTIVE, F=175 |APO FOR OPMI |LUMERA| 700 2| EA _______________ Meeting Salient Characteristics 303797-9140-000 CARL ZEISS |MEDITEC, INC. |ELECTRICAL |INVERTERTUBE 2| EA _______________ Meeting Salient Characteristics 305810-9001-000 CARL ZEISS |MEDITEC, INC. |ASEPSIS SET 22 |MM | 6/BX 2| EA _______________ Meeting Salient Characteristics 305542-0000-000 CARL ZEISS MEDITEC, INC. |WIDEFIELD, |PUSH-IN EYEPIECE |10X| 4 EA _______________ Meeting Salient Characteristics 305953-9082-000 CARL ZEISS |MEDITEC, INC. |ADDITIONAL |DISPLAY| 2| EA _______________ Meeting Salient Characteristics 305953-9038-000 CARL ZEISS |MEDITEC, INC. |TRAY W. MONITOR |BRACKET AND 22"| |MONITOR 2 |EA _______________ Meeting Salient Characteristics 305810-9001-000 CARL ZEISS |MEDITEC, INC. |ASEPSIS SET 22 |MM| 4 EA _______________ Meeting Salient Characteristics 305810-9017-000 CARL ZEISS |MEDITEC, INC. |ASEPSIS CAPS |HANDGRIP LUMERA |700| (X6) 2 |EA _______________ Meeting Salient Characteristics 000000-1055-278 CARL ZEISS |MEDITEC, INC. |DUSTCOVER BLUE 2 |EA _______________ Meeting Salient Characteristics 302681-9158-000 CARL ZEISS |MEDITEC, INC. |IDIS-INTEGRATED |DATA INJECTION |SYSTEM 2 EA _______________ Meeting Salient Characteristics 305953-9081-000 CARL ZEISS |MEDITEC, INC. |ETHERNET |INTERFACE FOR |OPMI| LUMERA 700 2 EA _______________ Meeting Salient Characteristics 302681-9740-000 CARL ZEISS |MEDITEC, INC. |INTEGRATED HD |CAMERA| 2 EA ______________ Meeting Salient Characteristics 302681-9765-000 CARL ZEISS |MEDITEC, INC. |INTEGRATED HD |RECORDING| 2 EA _______________ Meeting Salient Characteristics 309438-9002- 000 CARL ZEISS |MEDITEC, INC. |TRNSPRT CASE |OPMI LUMERA 700 |FLOOR| STAND 2 EA _______________ Meeting Salient Characteristics Need Lumera 700 Microscope is needed to assist for cataract and retinal surgery Functions to be performed; The surgical microscope is an optical instrument consisting of a combination of lenses which provide the surgeon with a stereoscopic, high quality magnified image of small structures with the surgical area. A key characteristic of any surgical microscope is its design. The microscope design helps the surgeon to concentrate on the surgical procedure and allows the surgeon remains comfortable with free of eye strain frees both surgeon's hands to operate. The microscope will be used for cataract and retinal surgery s. The microscope will be used with the Resite 700 for retial surgery. Performance required; or Essential physical characteristics; Dimensions (if applicable) Surgical microscope Motorized zoom system with apochromatic lens, zoom ratio 1 : 6 Magnifi cation factor = 0.4x-2.4x Focusing: electric / motorized, Focus range: 70 mm Assist scope with electric zoom Objective lens: f = 200 mm (optionally also f = 175 mm or f = 225 mm with support ring) Binocular tube: Invertertube Electrical Wide-angle eyepiece 10 x (optionally also 12.5 x) Light source SCI: Coaxial and full-fi eld illumination (patent pending) Fiber optic illumination Halogen: Lamp housing with 2 halogen lamps (1 backup lamp) in quick-change slide-in mechanism If the primary halogen lamp fails, the microscope switches to the backup lamp automatically Fiber optic illumination Superlux® Eye: Xenon short arc reflector lamp with HaMode filter Backup lamp in lamp housing, can be slid into position manually LED fiber optic illumination: Near-daylight color temperature 50,000-hour lifetime at 50 % light intensity HaMode filter 25 % gray filter For all light sources: Blue blocking filter Optional: Fluorescence filter Slit lamp Slit widths: 0.2 mm, 2 mm, 3 mm, 4 mm Slit height: 12 mm XY coupling Travel range: max. 61 mm x 61 mm Automatic centering at the touch of a button Video monitor 22" LCD display Resolution: 1,680 x 1,050 Stand Maximum permissible weight load of the spring arm: When the surgical microscope is attached to the arm (without tube, eyepiece or objective lens) and the XY coupling is also attached, a maximum of 9 kg of additional accessories can be attached to the spring arm Integrated HD camera, Integrated HD recording, IDIS-integrated data injection Must accommodate/be compatible with objective F=200 APO for OPMI Lumera 700, objective=175 APO for OPMI Lumera 700 Must be compatible with Resite 700 fundus viewing system Must be able to use Asepsis handgrip caps, asepsis 22mm sets owned by facility The following Federal Acquisition Regulation (FAR) and Veterans Affairs Acquisition Regulation (VAAR) provisions and clauses are applicable to this acquisition and are available for view at: http://farsite.hill.af.mil/ FAR Provisions: 52.204-7 System for Award Management (JUL 2013) 52.212-1 Instructions to Offerors- Commercial Items (JUL 2013) 1. Offeror shall provide an itemized list of the items Offeror shall provide a quote addressing CLINS (0001-) 52.212-2 Evaluation-Commercial Items (JAN 1999) The Government will award a firm fixed priced contract to the responsible offeror who is the lowest priced technically acceptable. 52.212-3 Certifications and & Representations (NOV 2013) VAAR Provisions: 852.233-70 Protest Content/Alternative Dispute Resolution (JAN 2008) 852.233-71 Alternative Protest Procedure (JAN 1998) 852.252-70 Solicitation Provisions or Clauses Incorporated by Reference (JAN 2008) 852.273-74 Award Without Exchanges (JAN 2003) FAR Clauses: 52.203-17 Contractor Employee Whistleblower Rights and Requirements to Inform Employees of Whistleblower Rights (SEP 2013) 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper (MAY 2011) 52.212-4 Contract Terms and Conditions- Commercial Items (SEP 2013) 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (SEP 2013) 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (JUL 2013) 52.209-6 Protecting the Government s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (AUG 2013) 52.222-3 Convict Labor (JUN 2003) 52.222-19 Child Labor Cooperation with Authorities and Remedies (MAR 2012) 52.222-21 Prohibition of Segregated Facilities (FEB 1999) 52.222-26 Equal Opportunity (MAR 2007) 52.222-35 Equal Opportunity for Veterans (SEP 2010) 52.222-36 Affirmative Action for Workers with Disabilities (OCT 2010) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011) 52.232-33 Payment by Electronic Funds Transfer- System for Award Management (JUL 2013) 52.252-2 Clauses incorporated by Reference (FEB 1998) VAAR Clauses: 852.203-70 Commercial Advertising (JAN 2008) 852.232-72 Electronic Submission of Payment Requests (NOV 2012) 852.237-70 Contractor Responsibilities (APR 1984)

Bid Protests Not Available