THIS SOURCES SOUGHT IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES ONLY AND DOES NOT CONSTITUTE A SOLICITATION. THE SUBMISSION OF PRICING, CAPABILITIES FOR PLANNING PURPOSES, AND OTHER MARKET INFORMATION IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI IN ACCORDANCE WITH (IAW) FAR 15.201(e). This is not a solicitation announcement. This is a sources sought synopsis only. The purpose of this synopsis is to gain knowledge of potential qualified businesses under NAICS 339113. Responses to this synopsis will be used by the Government to make appropriate acquisition decisions. After review of the responses to this sources sought synopsis, a solicitation announcement may be published in the FedBizOpps or GSA eBuy websites. Responses to this sources sought synopsis are not considered adequate responses to the solicitation announcement. All interested offerors will have to respond to the solicitation announcement in addition to responding to this sources sought announcement. The Department of Veterans Affairs, Network 22 Contracts Office, is seeking sources for Mizuho Surgical Instruments. Specifically, the agency is seeking the following Item numbers manufactured by Mizuho: Item # Description Quantity UOM 0001 07DAY05MSC TUBE-SUCTION,5FR,DAY-BAILES,MED 2 EA 0002 07-DAY-06MSC TUBE,SUCTION,6FR,DAY-BAILES,MED 2 EA 0003 07-DAY-07MSC TUBE,SUCTION,7FR,DAY-BAILES,MED 2 EA 0004 07-DAY-09MSC YUBE,SUCTION,9FR,DAY-BAILES,MED 2 EA 0005 07-DAY-05LSC TUBE,SUCTION,5FR,DAY-BAILES,LONG 2 EA 0006 07-DAY-06LSC TUBE,SUCTION,6FR,DAY-BAILES,LONG 2 EA 0007 07-DAY-07LSC TUBE,SUCTION,7FR,DAY-BAILES,LONG 2 EA 0008 07-DAY-08LSC TUBE,SUCTION,8FR,DAY-BAILES,LONG 2 EA 0009 07-DAY-09LSC TUBE,SUCTION,9FR,DAY-BAILES,LONG 2 EA 0010 07-119-01SC HANDLE,SUCTION,FLAT,TEARDROP 4 EA 0011 07-962-05D TUBE,SUCTION,5FR,ENDONASAL,DOWN 2 EA 0012 07-962-05U TUBE,SUCTION,5FR,ENDONASAL,UP 2 EA 0013 07-962-07D TUBE,SUCTION,7FR,ENDONASAL,DOWN 2 EA 0014 07-962-07U TUBE,SUCTION,7FR,ENDONASAL,UP 2 EA 0015 07-822-48MA CURETTE,RING,9CM/5MM,45-DEG,UP 2 EA 0016 07-822-49MA CURETTE,RING,9CM/5MM,90-DEG,UP 2 EA 0017 07-822-50MA CURETTE,RING,9CM/5MM,45-DEG,DOWN 2 EA 0018 07-822-51MA CURETTE,RING,11CM/5MM,45-DEG,UP 2 EA 0019 07-822-52MA CURETTE,RING,11CM/5MM,90-DEG,UP 2 EA 0020 07-822-53MA CURETTE,RING,11CM/5MM,45-DEG,DOWN 2 EA 0021 07-822-54MA CURETTE,RING,9CM/3MM,45-DEG,UP 2 EA 0022 07-822-55MA CURETTE,RING,9CM/3MM,90-DEG,UP 2 EA 0023 07-822-56MA CURETTE,RING,9CM/3MM,45-DEG,DOWN 2 EA 0024 07-822-57MA CURETTE,RING,11CM/3MM,45-DEG,UP 2 EA 0025 07-822-58MA CURETTE,RING,11CM/3MM,90-DEG,UP 2 EA 0026 505.00 CIRETTE,RING,11CM/3MM,45-DEG,DOWN 2 EA 0027 07-822-60MA CURETTE,RING,9CM/1.5MM,45-DEG,UP 2 EA 0028 07-822-61MA CURETTE,RING,9CM/1.5MM,90-DEG,UP 2 EA 0029 07-822-62MA CURETTE,RING,9CM/1.5MM,45-DEG,DOWN 2 EA 0030 07-822-63MA CURETTE,RING,11CM/1.5MM,45-DEG,UP 2 EA 0031 07-822-64MA CURETTE,RING,11CM/1.5MM,90-DEG,UP 2 EA 0032 07-822-65MA CURETTE,RING,11CM/1.5MM,45-DEG,DOWN 2 EA 0033 02-034-01MA DISSECTOR,RHOTON #3,9CM/3MM,UP 2 EA 0034 02-035-02MA DISSECTOR,RHOTON #3,9CM/3MM,DOWN 2 EA 0035 02-034-03MA DISSECTOR,RHOTON #3,11CM/3MM,UP 2 EA 0036 02-034-04MA DISSECTOR,RHOTO #3,11CM/3MM,DOWN 2 EA 0037 07-820-25MA HOOK,NERVE,9CM,TEAR DROP,STRAIGHT 2 EA 0038 07-820-28MA HOOK,NERVE,9CM,TEAR DROP,45-DEG,UP 2 EA 0039 07-820-30MA HOOK,NERVE,9CM,TEAR DROP,90-DEG,UP 2 EA 0040 07-820-31MA HOOK,NERVE,9CM,TEAR DROP,45-DEG,DOWN 2 EA 0041 07-820-32MA HOOK,NERV,11CM,TEAR DROP,STRAIGHT 2 EA 0042 07-820-33MA HOOK,NERVE,11CM,TEAR DROP,45-DEG,UP 2 EA 0043 07-820-34MA HOOK,NERVE,11CM,TEAR DROP,90-DEG,UP . 2 EA 0044 07-820-35MA HOOK,NERVE,11CM,TEAR DROP,45-DEG,DOWN 2 EA 0045 02-034-05MA SPATULA,DUCKBILL,9CM WL,UP ANGLE 2 EA 0046 02-034-06MA SPATULA,DUCKBILL,9CM WL,DOWN ANGLE 2 EA 0047 02-034-07MA SPATULA,DUCKBILL,11CM WL,UP ANGLE 2 EA 0048 02-034-08MA SPATULA,DUCKBILL,11CM WL,DOWN ANGLE 2 EA 0049 07-821-14MA KNIFE,ARACHNOID,CP-2,11CM WL,UP ANGLE 2 EA 0050 07-821-15MA KNIFE,ARACHNOID,CP-2,11CM WL,DOWN ANGLE 2 EA 0051 07-821-16MA KNIFE,ARACHNOID,CP-4,11CM WL,UP ANGLE 2 EA 0052 07-821-17MA KNIFE,ARACHNOID,CP-4,11CM WL,DOWN ANGLE 2 EA 0053 02-034-14MA SPATULA,1.8MM,125MM,WL,UP 2 EA 0054 02-034-15MA SPATULA,1.8MM,125MM,WL,DOWN 2 EA 0055 02-082-40 FORCEP,MICRO,9CM,STR,SHARP.0.4MM,FLAT 2 EA 0056 02-082-41 FORCEP,MICRO,9CM,WL,STR,BLUNT,0.9MM,FLAT 2 EA 0057 02-082-42 FORCEP,MICRO,11CM,WL,STR,SHARP,0.4MM,FLAT 2 EA 0058 02-082-43 FORCEP,MICRO,11CM,WL,STR,BLUNT,0.9MM,FLAT 2 EA 0059 02-082-44 FORCEP,TUMOR,9CM,BAYONET,3MM DIA,FH 2 EA 0060 02-082-45 FORCEP,TUMOR,9CM,BAYONET,5MMDIA,FH 2 EA 0061 07-827-61 MICROSCISSORS,ROTATABLE,23CM,9CM,STR 2 EA 0062 07-827-62 MICROSCISSORS,ROTATABLE,25CM,11CM,STR 2 EA 0063 07-827-63 MICROSCISSOR,ROTATABLE,23CM,9CM,CURVED 2 EA 0064 07-827-64 MICROSCISSOR,ROTATABLE,25CM,11CM,CURVED 2 EA 0065 07-827-65 MICROSCISSORS,ROTATABLE,23CM,9CM,45-DEG,UP 2 EA 0066 07-827-66 MICROSCISSORS,ROTATABLE,25CM,11CM,45-DEG,UP 2 EA 0067 02-082-46 FORCEP,RONGEUR,11CM,2MM,RND,45/UP 2 EA 0068 02-082-47 FORCEP,RONGEUR,11CM,2MM,RND,STR 2 EA 0069 02-082-48 FORCEP,RONGEUR,11CM,2X5MM,OVAL,STR 2 EA 0070 02-082-49 FORCEP,RONGEUR,11CM,2X5MM,OVAL,45/UP 2 EA 0071 07-822-00MA TRAY-INSTRUMENT,ORGANIZE-1 2 SE 0072 07-822-01MA TRAY-INSTRUMENT,ORGANIZE-2 2 SE 0073 NF-100BA BAYONET,BLADE,TITANIUM,HANDLE,ROTATABLE,100MM 4 EA 0074 17-016-31 APPLIER,LONG,FUKUSHIMA,NO CATCHES 2 EA 0075 17-013-56 REMOVER,TII MINI,STRAIGHT 90MM WL 1 EA 0076 17-002-20 BAYONET,TII MINI,10.0 7MM 2 EA 0077 17-001-01 TII,8.5,STRAIGHT 7MM 6 EA 0078 17-001-02 TII,10.5,STRAIGHT 10MM 4 EA 0079 17-001-62 TII,9.0 1/4,CURVED 7.5MM 6 EA If you are interested, and are capable of providing the required supplies please provide the requested information as indicated below. Responses to this notice should include: company name, address, point of contact, size of business pursuant to the following questions: Please indicate the size status and representations of your business, such as but not limited to: Service Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hubzone, Woman Owned Small Business (WOSB), Large Business, etc.) Are you currently registered in SAM and VIP? Is your company considered small under the NAICS code identified under this RFI? If not, is your company considered small under a related NAICS code? Are you the manufacturer or distributor of the items being referenced above (or equivalent product/solution)? What is the manufacturing country of origin of these items? If you re a small business and you are an authorized distributor/reseller for the items identified above (or equivalent product/solution), do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? Does your company have an FSS contract with GSA or the NAC or are you a contract holder with NASA SEWP or any other federal contract? If so, please provide the contract type and number. If you are an FSS GSA/NAC or NASA SEWP contract holder or other federal contract holder, are the referenced items/solutions available on your schedule/contract? Please provide general pricing for your products/solutions for market research purposes. Please submit your capabilities in regards to the salient characteristics being provided and any information pertaining to brand name items to establish capabilities for planning purposes? Identify any other companies owned (wholly or in-part) by the owners of this business who provide goods or services under the same or a related NAICS codes. Identify any other companies owned (wholly or in-part) by the owners of this business who provide goods or services that are registered under the same or a related NAICS code with the Center for Veterans Enterprise (CVE); Provide the certification type (SDVOSB/VOSB), Federal Identification Number, and state of incorporation for each. Do you plan on responding to a solicitation for this requirement with a Joint Venture utilizing multiple owned companies as majority or non-majority owner? Yes ___No ___ If yes, please identify which companies are considering a Joint Venture and the ownership of each company. Responses to this notice shall be submitted via email to [email protected]. Telephone responses shall not be accepted. Responses must be received no later than Tuesday, June 9th at 11:00 AM PST. If a solicitation is issued it shall be announced at a later date, and all interested parties must respond to that solicitation announcement separately from the responses to this request for information. Responses to this notice are not a request to be added to a prospective bidders list or to receive a copy of the solicitation.

Bid Protests Not Available