SUBJECT: NOTICE OF INTENT TO AWARD A SOLE SOURCE PROCUREMENT FOR IDAN components to build Time Space Position Information. This systems measure the position, velocity, and attitude of the vehicle. The Intent of Award is to RTD EMBEDDED TECHNOLOGIES INC, 103 INNOVATION BLVD, STATE COLLEGE, PA 16803-6605. Salient Characteristics for IDAN Components: PERIPHERAL MODULE (IDAN-TJ303-CM310HRS); Compatible with industry standard 16C550; 115.2K baud RS-232 operation; Up to 1.5M baud RS-422 operation; 16 byte transmit FIFO/16byte receive FIFO with error flags; Independent transmits and receives control; Standard modem interface; Jumper selectable to interrupt line, base, address, RS232/RS422-485 mode per port; 42 selectable I/O base address; Four Jumper configurable RS-232/422/485 serial ports; DOS diagnostic programs; Size: 90mm L x 96mm W x 15mm H (3.6?L x 3.8? W x 0.6? H); Operating temperature: -40C to +85C: 90% humidity non-condensing; Power requirements 1.5W @ 5 VDC typical; POWER RELAY DATA MODULE (JT304-IDAN-DM6952HR-62S); Outputs: 16 power relays with Form C contacts; 60 V A switching capacity; Switching current: 2 A at 30 VDC; 0.5 A at 125 VAC; Max switching voltage 220 VDC/VAC; Operate and release time 4 milliseconds; 1000 Vrms isolation; Connectors: H Standard 50 position 0.1 DIL headers; Screw terminal block Size: 90mm; L x 96mm W x 15mm H; Operating Temperature -40? to +85?C: 90% humidity non-condensing; Power requirements: 1.25W (all relays active) @ 5 VDC typical; BUILDING BLOCK MODULE (Peripheral) (IDAN-CM6109HR-1S); Pc/104 ISA expansion Bus; Modular rugged milled aluminum frame; Aluminum allows ? 6061, temper-T6, clear chromate; Supports types I & II PC cards (PCMCIA); True IDE mode flash disks; Size: 152mm L x 130mm W x 17mm H; Weight approx 0.30 Kg; Operating temperature -40? to +85?C; Power requirements 0.1 W typical, 0.25 W max @ 5 VDC typical; BUILDING BLOCK (CPU) (IDAN-CM47786CX-650HR-128D/A256X); Pc/104- PLUS PCI EXPANSION Bus; PC/104 ISA expansion Bus; 128, 256, & 512 Mbytes SDRAM; 32-pin SSD socket; Capacities up to 4GB; Real time clock battery backup; AC97 Audio Support; Modular rugged milled aluminum frame; Integral structural heat sink with embedded heat pipes & external fins for sheet dissipation; Aluminum allow ? 6061, temper-T6, clear chromate; Internal I/O ports EIDE controller; Power requirements 650 MHz 9.0 W @ 5 VDC typical; BUILDING BLOCK 75W (Peripheral Module) (IDAN-HPWR104HRTX-75WS); Outputs +5 Vdc at 15.0 A; +12 Vdc at 2.0 A; -12 Vdc at 0.5 A; Input Voltage Range: 8-32 Vdc input; reverse polarity, transient, and over-voltage protection; Size: 152mm L x 130mm W x 17mm H; Weight approx 0.30 Kg; Operating Temp ?40C to +85C; Power requirements: 75W max output power @ 88% efficiency typical; IDAN BOLTS (IDAN-Bolts-129); Cover TP: 4mm; IDAN-COVER-TP & FRAME (IDAN-Cover-TP & JT301-IDAN-Frame-SH); 5.983 X 5.117; IDAN BASE BF; 5.983 X 6.617; EMBEDDED TECHNOLOGIES INC, 103 INNOVATION BLVD, STATE COLLEGE, PA 16803-6605 is the only known source that can satisfy the requirements of the Government at this time. Please note that this is not a request for competitive proposals. However, all interested parties who believe they can meet the requirements are invited to submit in writing complete information describing their ability to provide the items listed above. Responses may be sent via e-mail to [email protected] or mailed to AFFTC/PKDD, 5 South Wolfe Ave, Edwards AFB, CA 93524-1185, Attention: Leonard Buckless. Information received as a result of this notice will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Air Force not to open the requirement to open competition, based on response to this notice, is solely within the discretion of the Air Force. If the office has not received any affirmative written responses by Close of Business (COB), 20 March 07, a Sole Source purchase order will be pursued with RTD EMBEDDED TECHNOLOGIES INC, 103 INNOVATION BLVD, STATE COLLEGE, PA 16803-6605.

Bid Protests Not Available