This Sources Sought Notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government at this time. This notice is intended strictly for market research. The purpose of this Sources Sought notice is to determine interest and capability of potential qualifications relative to the North American Industry Classification Code (NAICS) 335220. The Department of Veteran s Affairs is seeking small business manufacturer or distributors of small business manufacturers, of functionally Brand-Name or Equal equipment to all the following: Hobart Dishwasher and accessories 1) CL44EN-BAS+B BUILDUP, DISHWASHER CONVEYOR TYPE Hobart Model No. CL44EN-BAS+BUILDUP Conveyor Dishwasher, single tank, (202) racks/hour, insulated hinged doors, .62 gallon/rack, stainless steel enclosure panels, microprocessor controls with low temperature & dirty water indicators, NSF Pot & Pan mode, programable de-lime notification, ENERGY STAR, Free factory startup for installations within a 50-mile radius of a Hobart service office. Installation beyond 50 miles will be charged at the quoted rate by the local Hobart service office 1 ea Standard warranty - 1-Year parts, labor & travel time during normal working hours within the USA 1 ea NSF APPROVED POT AND PAN MODE Machine comes standard with a built in NSF approved pot and pan mode 1 ea CL44EN-BASELE0CD 480v/60/3-ph 2) CL44EN-BASHTE ESTM, STEAM COIL-STAINLESS STEEL 1 ea CL44EN-BASERH0NO Without internal booster 1 ea CL44EN-BASDIR0RL Right to left operation 1 ea CL44EN-BASHGTSTD Standard height 1 ea CL44EN-BASFETSTD Standard feet 1 ea NOTE: For water over 3-grains of hardness, Hobart suggests adding a water softener1 ea CL44EN-BASERH0NO Without internal booster 3) VNTHD/E-ADJ, E-series vent hood domestic (adjustable) 4) SHTPAN-RACK, Rack, 6 sheet pan 5) PRESREG-1/20B BR, 1/2" brass pressure regulator (is standard with built- in booster heater models) 6) 1/2INSHK-ABSR RBR, Water Shock Absorber Kit (Unit without booster also needs PRESREG-1/20BR) 7) CLE/TBL-SWITC CH, Table LMT switch CLE-Series 8) BOOSTER+BUILD DUP, Booster Heater, steam, 10-50 PSI 1 ea Standard warranty - 1-Year parts, labor & travel time during normal working hours within the USA 1 ea BOOSTER-ELE0FT 100-120v/50v/60/1-ph 1 ea BOOSTER-TYP150 150-1 booster 9) CDTL-84-14/3, CLEAN DISH TABLE Eagle Group Model No. CDTL-84-14/3 Spec-Master Clean Dish table, straight design, 84"W x 30"D x 43-1/2"H overall, right-to-left operation, 14/304 stainless steel top, 8"H backsplash, raised rolled edges on front & side, stainless steel legs & cross bracing, adjustable metal feet, NSF 10) INSTALLATION 1. Authorized installer will receive, un-crate, deliver and set in place (1) Hobart 44" conveyor dishwasher with steam booster 2. Authorized installer will remove and dispose (1) AM Single tank dishwasher 3. Authorized installer will make all final connections to properly sized existing utilities such as water, drain, electric, steam and steam return line within five feet. 4. Authorized installer will test and make ready for use. 5. All labor will be provided Monday through Friday 8-4 P.M. 11) FT1000+ENERG GY, DISHER FLIGHT TYPE Hobart Model No. FT1000+ENERGY Flight type dish machine, 58 gallons of final rinse consumption per hour, with dual rinse, hinged & insulated doors, sliding wash arms without caps, & microprocessor controls with Auto Clean, AutoDelime, Energy Recovery, 16" round flange & Automatic Soil Removal system (ASR) 1 ea All FT1000 models are to be quoted by Hobart's internal quotation group 1 ea Standard warranty - 1-Year parts, labor & travel time during normal working hours within the USA 1 ea FT1000-ASRYES Automatic Soil Removal Included (ASR) 12) FT1000-LPF0255, Load Platform 2.5' (Total LOAD length is 2.5' load platform + 2' ASR + 3' prewash = 7'7") 1 ea FT1000-ACLYES With Auto Clean 1 ea FT1000-ADLYES With Auto Delime 1 ea FT1000-DRNUNL Drain in Unload 1 ea FT1000-DRSYES With Dual Rinse 1 ea FT1000-CTRSTD Standard Non-Split 8' Center Joined (Wash/Power Rinse/Dual Rinse) 13) FT1000-UNL0755, 7' 5" Unload Section Non-Split 1 ea FT1000TLG24.27 TLG - Total Length of load, center & unload section is: 24.27 feet (overall length) 14) FT1000-DRYYESS, WITH BLOWER DRYER 1 ea FT1000-HGTSTD Standard Height 1 ea FT1000-EGRYES With Energy Recovery System Included 1 ea FT1000-AER0NO Without Advansys Energy Recovery (Ventless Technology) 15) FT1000-HTESCLL, STEAM COIL 1 ea FT1000-CON001 (1) Service Connection (refer to specifications sheet for rated amps ) 1 ea FT1000-ELE0CD 480v/60/3-ph (HV), for steam heat 1 ea FT1000-CBR0NO Without Circuit Breaker 16) FT1000-BST1200, 120 STEAM BOOSTER 1 ea FT1000-PIPSTD Standard Piping 1 ea FT1000-DIR0RL Right to left operation 1 ea FT1000-DORHNG Hinge doors, all sections 1 ea FT1000-SEC0NO Without added security eCMS Item Line ID 18126060 17) FT1000-CNVTACC, TYPE A CONVEYOR 1 ea FT1000-ROD0NO Without Cross Rods 1 ea FT1000-SEF0NO Without SEF Options 18) Service Labor Hours for Energy Recovery- Note- If the customer location is beyond 50 miles of the local Hobart Office, please contact the Branch Manager or Agent for more specific quote. Any additional training required by the General Contractor or Customer for Flight- Type assembly will be at an additional charge to the Customer 19) Service Labor Hours for Blower Dryer- Note- If the customer location is beyond 50 miles of the local Hobart Office, please contact the Branch Manager or Agent for more specific quote. Any additional training required by the General Contractor or Customer for Flight-Type assembly will be at an additional charge to the Customer 20) Service Labor Hours for Removal & Reinstall for Energy Recovery Shipped Loose- Note- If the customer location is beyond 50 miles of the local Hobart Office, please contact the Branch Manager or Agent for more specific quote. Any additional training required by the General Contractor or Customer for Flight-Type assembly will be at an additional charge to the 21) INSTALLATION 1. Authorized installer will remove and dispose (1) Stero flight type dishwasher with blower dryer 2. Authorized installer will receive, un-crate, deliver and set in place (1) Hobart flight type dishwasher 3. The assembly of the machine will be provided by Hobart Service. 4. Authorized installer will make all final connections to properly sized existing utilities such as water, drain, electric, steam and steam return line within five feet. 5. Authorized installer will cap off the existing condensate line 6. Authorized installer will fabricate a new stainless-steel riser and connect to the existing trunk line 7. All ceiling tiles will be replaced by others 8. Authorized installer will test and make ready for use. 9. All labor will be provided Monday through Friday 8-4 P.M. 22) OPERATIONAL MANUALS 23) SERVICE MANUALS RESPONSE DATE (DEADLINE): 04/01/2021 at 11:00 AM. THIS IS NOT A SOLICITATION AND DOES NOT OBLIGATE THE GOVERNMENT TO ISSUE A SOLICITATION. Please be advised that the Government will not pay for any information submitted under this announcement. The applicable North American Classification System (NAICS) Code for this requirement is 335220 (Kitchen Equipment and Appliances). Responses due are to be submitted by e-mail only to [email protected]. Name of firm, Socio-Economic category of the firm is needed, capable (SDVOSB & VOSB) vendors should supply CVE Certification letter from Veterans Information Pages (VIP), along with complete address, phone & fax number of contacts.

Bid Protests Not Available