Federal Bid

Last Updated on 03 Feb 2021 at 7 PM
Sources Sought
Saint albans Vermont

7320--Kitchen Equipment

Solicitation ID 36C24221Q0478
Posted Date 03 Feb 2021 at 7 PM
Archive Date 15 Feb 2021 at 5 AM
NAICS Category
Product Service Code
Set Aside Total Small Business (SBA) Set-Aside (FAR 19.5)
Contracting Office 242-Network Contract Office 02 (36c242)
Agency Department Of Veterans Affairs
Location Saint albans Vermont United states 11425
This Sources Sought Notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government at this time. This notice is intended strictly for market research. The purpose of this Sources Sought notice is to determine interest and capability of potential qualifications relative to the North American Industry Classification Code (NAICS) 325998. The Department of Veteran s Affairs is seeking small business manufacturer or distributors of small business manufacturers, of functionally Brand-Name or Equal equipment to all the following: Vulcan Kitchen Equipment and accessories FP250-1B food processor, benchtop/countertop Hobart Model No FP250-1B Food processor, angled continuous feed design, full size hopper, 17 lb. per/min production capacity, 420 rpm, stainless steel cutting surfaces, planetary gear transmission, triple safety interlocks, aluminum housing, rubber feet, 15PLTSS-6PACK, 120/60/1, 3/4 HP, 8.0 amps, UL, NSF 2) Hobart care unlimited: M-F, 8am-5pm, weekday coverage for all calls, unlimited number of calls, (1) business day response for emergency calls, (3) business day response for non-emergency calls (2nd year extended warranty preference) (NET) G12010 Reach-In-Freezer Traulsen Model No G12010 Dealer's Choice Freezer, Reach-In, one-section, self-contained refrigeration, microprocessor control with LED display, stainless steel front, full-height solid door (hinged right), anodized aluminum sides & interior, (3) epoxy coated shelves (factory installed), LED interior lights, 6" high casters, eco-friendly, non-flammable R-448A refrigerant, unit can be programmed to operate at -10 degrees F, ½ hp, cETlus, NFS G22010 4 Reach-in-Freezer Traulsen Model No. G22010 Dealer's Choice, reach-in, two-section, self-contained refrigeration, microprocessor control with LED display, stainless steel front, full height solid doors (hinged left/right), anodized aluminum sides and interior, (3) epoxy coated shelves per section (factory installed), LED interior lights, 6" high casters, eco-friendly, nonflammable R-448A refrigerant, unit can be programmed to operate at -10 degrees, 3/4 hp, cETlus, NSF, ENERGY STAR 3-year parts & labor and 5 year compressor warranty, standard 115v/60/1-ph, 11.2 amps, NEMA 5-15P, VG30 5 Tilting skillet braising pan, gas Vulcan Model No VG30 Braising pan, gas, 30-gallon capacity, 36" wide open base, manual tilt, 9" deep stainless steel pan with gallon markings, pouring lip & removable strainer, spring assist cover with drip edge, pan holder, solid state control, includes L faucet bracket, electric ignition, 12" stainless steel legs with adjustable flanged feet, 90,000 BTU, CSA Flame, CSA Star, UL EPH Classified NOTE: A no charge equipment check out after the unit has been fully installed & put into service. 1-year limited parts & labor warranty, standard Natural gas (specify elevation if over 2,000 ft) NOTE: elevation kits are field installed 120v/60/1-ph, 9.0 amps, cord & plug, standard SGLTS 18NZLJ 6 SGLTS 18NZLJ SINGLE pantry deck mount faucet, 18" double jointed swivel spout, includes 4" & 12" riser, NSF & Lead Reduction Compliant 20X4 DRNPAN 7 20X4 DRNPAN Drain pan and hose HG-4D-48SK 8 Gas Connect kit T&S Brass Model No HG-4D-48SK Safe-T Link Gas Connector Kit, 3/4" connection, 48"L, stainless steel braid with extruded coating, (1) quick disconnect, (2) swiveling swivels, (1) 90-degree elbow, ball valve, restraining cable adjustment for 3' to 5' PW10-1 9 Dishwasher, pot/pan/utensil, door type Hobart Model No PW10-1 Pot/pan/utensil washer, front loading with split door design, (10) pan capacity, over/under rotating arms, 2/4/6-minute adjustable timer, up to (20) racks/hour, includes: (1) flat grid, (1) tray rack & (1) flat bottom rack, pre-rinse spray hose, sanitizing with Sense-A-Temp 70-degree booster rise, vent fan control, stainless steel construction, 208-240v/60/3-ph standard warranty - 1-year parts, labor & travel time during normal working hours within the USA Hobart Care Unlimited, M-F, 8am-5pm, weekday coverage for all calls, unlimited number of calls, (1) business day response for emergency calls, (3) business day response for non-emergency calls (2nd year extended warranty preference) (NET) DWT-PW 11 DWT-PW drain water tampering kit Installation of DWT kit WTRHAM-ARREST water hammer arrestor kit, includes 3/4" brass pressure regulator valve RACK-STEAMPAN steam pan rack, (5) pan rack to hold steam/buffet pans INSTALLATION; Custom Model No INSTALLATION installer will remove customers existing equipment to facility loading dock and properly dispose off-site. Installer will receive new equipment, deliver, uncrate, set in place and hook new equipment up to facility provided properly sized utilities within 3 feet of termination points. Installer will start up and test equipment for proper operation. All work to be done Mon-Fri, 8am-4pm. All generated debris will be placed in a facility provided container. Vulcan Tilt Skillet: Receive and schedule installation. Deliver, uncrate and install tilt skillet. Plumb to existing gas service with dealer supplied gas hose. Plumb to existing cold-water supply provided by others. Connect to electrical supply provided by others. Exclusions: extend the 1/2" copper cold water line to the left side of existing Rational oven and install 1/2" MPT hose bib faucet 24" above floor by others. 120/60/1 outlet supplied and installed by others for 15-amp power cord included with tilt skillet. Hobart PW10 pan washer: Receive and schedule installation. Disconnect, remove and dispose of existing pan washer and steam heat exchanger offsite, cap/plug steam and condensate return lines steam and condensate return will not be used. Deliver, uncrate and install pan washer. Plumb to existing hot water. Plumb to existing floor sink. Plumb to cold water supplied by others. Exclusions: one electrical service of 208/60/3 amp with service disconnect to be supplied by others. Once cold-water supply 1/2" MPT hose bib faucet 26" above floor by others. Steam and condensate return will not be used. Traulsen: Receive, deliver and install 2 Traulsen reach in units. Install casters and plug into customer supplied electrical service. 115/60/1 NEMA 5-15 outlet required. Hobart FP350: Deliver boxed food processor and accessories to food service. Final location to be determined. RESPONSE DATE (DEADLINE): 02/10/2021 at 11:00 AM. THIS IS NOT A SOLICITATION AND DOES NOT OBLIGATE THE GOVERNMENT TO ISSUE A SOLICITATION. Please be advised that the Government will not pay for any information submitted under this announcement. The applicable North American Classification System (NAICS) Code for this requirement is 325998 (All Other Miscellaneous Chemical Product and Preparation Manufacturing). Responses due are to be submitted by e-mail only to [email protected]. Name of firm, Socio-Economic category of the firm is needed, capable (SDVOSB & VOSB) vendors should supply CVE Certification letter from Veterans Information Pages (VIP), along with complete address, phone & fax number of contacts.
Bid Protests Not Available

Similar Past Bids

Location Unknown 19 Aug 2009 at 6 PM
East orange New jersey 27 Aug 2018 at 1 PM
Sheppard air force base Texas 06 Sep 2007 at 4 AM
Robbins North carolina 24 Aug 2017 at 2 PM

Similar Opportunities

Oklahoma 24 Jul 2025 at 4 AM (estimated)
Oklahoma 24 Jul 2025 at 4 AM (estimated)
South carolina 17 Jul 2025 at 6 PM