Red River Army Depot has an urgent requirement for the following steel and aluminum products: (1) Steel Galvanized Sheets, 0.052 In (18 GA) X 4 FT X 10 FT, ASTM A 653; 100 SH (2) Steel, 1/8 IN X 4 FT X 8 FT, 1008-1015, CS Grade B, ASTM A 1008/A 1008M -05; 60 SH (3) Steel, 4 FT X 8 FT X 0.105 IN OR 12 GA, 1018-1020, ASTM A 1008, CS Type B, Cold Rolled; 50 SH (4) Steel, 0.1345 IN (10 GA) X 4 FT X 8 FT, HSLA, MIL-S-13281; 30 SH (5) Steel, 1/4 IN X 4 FT X 8 FT, HSLA, ASTM A572; 20 SH (6) Steel, 1/4 IN X 4 IN X 8 IN, ASTM A36; 100 SH (7) Steel, 0.375 IN X 4 Ft X 8 FT, ASTM A36; 100 SH (8) Aluminum Round Bar, 0.375 IN Diameter X 12 FT, ASTM B211 or ASTM B221; 500 FT (9) Aluminum Angle, 3 IN X 3 IN X 3/8 IN X 25 FT, 6061-T6, ASTM B 308; 250 FT (10) Aluminum, 0.050/0.060 IN X 5 FT X 12 FT, 6061-T4, ASTM B 209; 45 SH (11) Aluminum, 0.050/0.060 IN X 8 FT X 12 FT, 6061-T4, ASTM B 209; 15 SH (12) Aluminum, 1/4 IN X 4 FT X 8 FT, 6061-T6, ASTM B 209; 16 SH (13) Aluminum, 1/4 IN X 5 FT X 12 FT, 6061-T6, ASTM B 209; 25 SH (14) Aluminum, 1/2 IN X 4 FT X 8 FT, 6061-T6, ASTM B 209; 10 SH (15) Aluminum, 3/8 IN X 4 FT X 8 FT, 5083 H321 OR H116 minimum tensile strength 45,000 KSI and yield strength 35,000 KSI, ASTM B 928; 10 SH (16) Aluminum, 1/2 IN X 4 FT X 8 FT, 5083 H321 OR H116, minimum tensile strength 45,000 KSI and yield strength 35,000 KSI, ASTM B 928; 10 SH (17) Aluminum, 3/4 IN Thickness, Width - Minimum 48 IN Maximum 72 IN, Length - Minimum 96 IN Maximum 144 IN, Alloy 5083, 5086 or 5456, Minimum tensile strength 40,000 KSI AND Minimum yield strength 28,000 KSI, Minimum elongation 10%, ASTM B 209 or ASTM B 928; 160 SF (18) Aluminum, 1 IN Thickness, Width - Minimum 48 IN Maximum 72 IN, Length - Minimum 96 IN Maximum 144 IN, Alloy 5083, 5086 or 5456, Minimum tensile strength 40,000 KSI AND Minimum yield strength 28,000 KSI, Minimum elongation 10%, ASTM B 209 or ASTM B 928; 160 SF (19) Steel Armor, 1.375 IN X 4 Ft X 8 FT, Class 1, MIL-A-12560H (MR) 20 July 2007; 2 SH (20) Aluminum Armor, 4 1/2 IN X 4 FT X 8 FT, Class 1, 5083, MIL-DTL-46083D (MR) 30 Sept 1998; 3 Plates Required delivery for these line items is 17 Oct 2008. Deliveries on all line items may be accelerated at the contractors discretion. Delivery is FOB Destination, Red River Army Depot, Texarkana, TX 75507-5000. This is an unrestricted procurement. Multiple awards are anticipated. Please bid on only those items that you can deliver by 17 Oct 2008. All awards should be made NLT COB 1 Oct 2008. Any contract awarded as a result of this solicitation will be a DO rated order certified for national defense use under the Defense Priorities and Allocations System (DPAS) (15 CFR 700), and the Contractor will be required to follow all of the requirements of this regulation. Request for quote W911RQ08T0142 will issue on or about 22 Sept 2008 and will be available on the RRAD website: https://www.redriver.army.mil. Address all questions and comments in writing to [email protected] or fax to 903-334-4141. The bid closing date is 26 Sept 2008, 5:00 PM Central Time. All quotes must be submitted on SF 1449. MTR's are required for on all line items.

Bid Protests Not Available