G
SPECIAL NOTICE
Notice of Intent to Sole Source Requirement
The Department of Veterans Affairs, Network Contracting Office (NCO) 10, 260 E University Ave. Cincinnati, OH 45219, intends to negotiate a sole source contract under Simplified Acquisition Procedures and the authority of FAR 13.106-1(b)(1)(i) sole source procurement made under the authority of Other Than Full and Open Competition IAW FAR 6.302-1 and 41 USC 3304(a)(1) only one responsible source and no other supplies or services will satisfy agency requirements. The associated NAICS code for this is 339113. The vendor will be Cryolife Inc, 1655 Roberts BLVD NW, Kennesaw, GA 30144. It is the Government’s belief that the proposed candidate is only one authorized to maintain their own required capabilities with their equipment to successfully meet this requirement. This procurement consists of procuring the following items:
Description of requirements:
On-X Aortic Prosthetic Heart Valve 19mm with Standard Sewing Ring
On-X Aortic Prosthetic Heart Valve 21mm with Standard Sewing Ring
On-X Aortic Prosthetic Heart Valve 23mm with Standard Sewing Ring
On-X Aortic Prosthetic Heart Valve 25mm with Standard Sewing Ring
On-X Aortic Prosthetic Heart Valve 27/29mm with Standard Sewing Ring
On-X Aortic Prosthetic Heart Valve 19mm with Conform-X Sewing Ring
On-X Aortic Prosthetic Heart Valve 21mm with Conform-X Sewing Ring
On-X Aortic Prosthetic Heart Valve 23mm with Conform-X Sewing Ring
On-X Aortic Prosthetic Heart Valve 25mm with Conform-X Sewing Ring
On-X Aortic Prosthetic Heart Valve 27/29mm with Conform-X Sewing Ring
On-X Aortic Prosthetic Heart Valve 19mm with Anatomic Sewing Ring
On-X Aortic Prosthetic Heart Valve 21mm with Anatomic Sewing Ring
On-X Aortic Prosthetic Heart Valve 23mm with Anatomic Sewing Ring
On-X Aortic Prosthetic Heart Valve 25mm with Anatomic Sewing Ring
On-X Aortic Prosthetic Heart Valve 27/29mm with Anatomic Sewing Ring
On-X Mitral Prosthetic Heart Valve 25mm with Standard Sewing Ring
On-X Mitral Prosthetic Heart Valve 27/29mm with Standard Sewing Ring
On-X Mitral Prosthetic Heart Valve 31/33mm with Standard Sewing Ring
On-X Mitral Prosthetic Heart Valve 25/33mm with Conform-X Sewing Ring
On-X Ascending Aortic Prosthesis w/ Vascutek Gelweave Valsalva Graft 19mm
On-X Ascending Aortic Prosthesis w/ Vascutek Gelweave Valsalva Graft 21mm
On-X Ascending Aortic Prosthesis w/ Vascutek Gelweave Valsalva Graft 23mm
On-X Ascending Aortic Prosthesis w/ Vascutek Gelweave Valsalva Graft 25mm
On-X Ascending Aortic Prosthesis w/ Vascutek Gelweave Valsalva Graft 27/29mm
On-X Valve Instrumentation Kit/Tray
This notice satisfies the requirement at FAR 5.201(b)(1), to publicize the proposed contract action. This notice of intent is not a request for competitive proposals or quotes. No solicitation documents are available; however, any SDVOSB or VOSB firm that believes it that they can meet the requirements may give written notification to the Contracting Officer. Supporting evidence must be furnished in enough detail to demonstrate compliance. Information must be sent electronically to [email protected]. Any responses received will be evaluated; however, a determination by the Government as to whether to compete the proposed procurement based upon responses to this notice is solely within the discretion of the Government. Responses must be received no later than 5:00 Eastern PM on October 22, 2021 to be considered.
Dwight Petsche
Contracting Officer
(513) 559-3721