G
-
*** LTC PID Packaging Header Text ***
-
PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION
AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.
-
*** Solicitation Number: 4001082188 Item: 0000000001
-
NSN:014634470
-
** PID Text
-
BATTERY, STORAGE,RECHARGEABLE
SEALED, LEAD-ACID AGM
MSDS/PSDS REQUIRED PER FED-STD-313
MIL-STD-129P(4) IS REQUIRED
MIL-STD-130N(1) IS REQUIRED
SHELF LIFE TYPE I, 12 MONTHS
THIS SHELF LIFE ITEM IS NON-EXTENDABLE, CODE H,
WITH A TOTAL SHELF LIFE OF TWELVE MONTHS.
MATERIAL FURNISHED UNDER THIS CONTRACT/ORDER
SHALL HAVE AT LEAST 85% (10 MONTHS) OF THE SHELF
LIFE REMAINING AT TIME OF DELIVERY.
EXCEPTION DATA:
ALL BATTERIES SUPPLIED FOR THIS NSN MUST ADHERE TO DIMENSIONS OF 908A,
USING ONLY DIMENSIONS SPECIFIED IN SPEC SPEC NEMA-C18.1M PART 1 O.D.
DIMENSIONS REQUIRED PER SPEC SPEC NEMA-C18.1M PART 1 ARE AS FOLLOWS:
ACCEPTABLE DIMENSIONS:,,,,
LENGTH: 2 5/8" (+/- 1/16")
WIDTH: 2 5/8" (+/- 1/16")
HEIGHT (NOT INCLUDING TERMINALS): 3 13/16" (+/- 1/16")
1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ
Z1.4-2003 (R2013). ANY ALTERNATE PLAN MUST BE
APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO
DEFECTS IS REQUIRED
2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE
FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.
MIL-STD-130N(1) DATED 16 NOV 2012.
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR EVALUATION.
THE CONTRACTOR SHALL PROVIDE A MATERIAL SAFETY DATA SHEET (MSDS) AS
DIRECTED BY FAR 52.223-3, HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL
SAFETY DATA (JAN 1997). A COPY OF THE APPLICABLE HAZARD WARNING LABEL(S)
(HWL) SHALL BE SUBMITTED WITH THE MSDS AS DIRECTED BY DFARS
252.223-7001, HAZARD WARNING LABELS (DEC 1991). THE MSDS SHALL BE IAW
FEDERAL STANDARD 313 (LATEST REVISION) AND CONFORM TO OSHA'S HAZARD
COMMUNICATION STANDARD IN TITLE 29 CFR 1910.1200 (LATEST REVISION) AND
SHALL BE SUBMITTED BY THE APPARENTLY SUCCESSFUL OFFEROR PRIOR TO
CONTRACT AWARD AS DIRECTED BY DLAD 52.223-9000, MATERIAL SAFETY DATA
SHEETS AND HAZARD WARNING LABELS (NOV 2011). TO SATISFY THE FED-STD-313
REQUIREMENT, THE CONTRACTOR SHALL SUBMIT THE APPLICABLE MSDS AND HWL TO
THE LOCAL ADMINISTERING AGENCY'S CONTRACTING OFFICE FOR PROCEDURAL
REVIEW AND APPROVAL PRIOR TO CONTRACT AWARD. CONTRACTOR MUST EXERCISE A
DUTY OF CARE THAT EACH MSDS BE REGULARLY UPDATED (USUALLY EVERY THREE TO
FIVE YEARS) OR WITHIN 3 MONTHS OF ANY CHANGES PER U.S. CODE, TITLE 42,
CHAPTER 116, SUBCHAPTER II, PARAGRAPH 11021(D).
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT
CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SHELF LIFE TYPE I, 12 MONTHS
THIS SHELF LIFE ITEM IS NON-EXTENDABLE, CODE H,
WITH A TOTAL SHELF LIFE OF TWELVE MONTHS.
MATERIAL FURNISHED UNDER THIS CONTRACT/ORDER
SHALL HAVE AT LEAST 85% (10 MONTHS).
Package iaw appropirate UN requirements according the applicable mode of
transportation.
POWER-SONIC CORPORATION, THE DBA 0WJ05 P/N PS-650LS
BATTSCO, LLC DBA 5VRN0 P/N UN5-6S
REFERENCE NUMBER:CQSLH
REFERENCE NUMBER:Q0106
REFERENCE NUMBER:A0003
REFERENCE NUMBER:CA060
REFERENCE NUMBER:ZD024
REFERENCE NUMBER:ZD025
PREP FOR DELIVERY
LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS
-
** Packaging Text
-
SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.
Markings Paragraph
When ASTM D3951, Commercial Packaging is specified, the following apply:
,,In addition to requirements in MIL-STD-129, when Commercial Packaging
is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be "CP" Commercial Pack.,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified
in the contract take precedence over QUP in ASTM D3951.
-
-
*** LTC PID Packaging Header Text ***
-
-
************************************************************************************************************
-
GLOSSARY
-
************************************************************************************************************
PACKAGING TEXT
-
THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:
Markings Paragraph
When ASTM D3951, Commercial Packaging is specified, the following apply:
,,All Section "D" Packaging and Marking Clauses take precedence over
ASTM D3951.,,In addition to requirements in MIL-STD-129, when Commercial Packaging
is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be "CP" Commercial Pack.,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified
in the contract take precedence over QUP in ASTM D3951.