The United States Coast Guard Surface Forces Logistics Center intends to issue a Commercial Request for Quote (RFQ) for Dockside Repairs to the USCGC CAMPBELL (WMEC-909), a 270 Foot "B" Class Medium Endurance Cutter (WMEC-909). The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The simplified acquisition will be issued as a Request for Quote (RFQ), on or about 16 MAR 2011. The RFQ will be issued via the Federal Business Opportunity (FEDBIZOPPS) web page at www.fbo.gov. Hard copies of the specification and solicitation will not be issued. It is incumbent upon contractors to monitor the FEDBIZOPPS web page for RFQ release and all subsequent amendments. FEDBIZOPPS also contains an option automatic notification service. THE ACQUISITION WILL BE SOLICITED AS A HUBZONE SET ASIDE.
The acquisition is for Dockside Repairs to the USCGC CAMPBELL (WMEC-909) homeport in Portsmouth, NH. The performance period will be fifty-four (54) calendar days with a start date on or about 27 JUN 2011. The place of performance will be at cutter's homepier.
The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC CAMPBELL (WMEC-909). This work will include, but is not limited to:
(D-001) Tanks (Aviation Fuel Service), Clean
(D-002) Tanks (MP Fuel Service), Clean
(D-003) Vent Ducts (Engine Room), Commercial Cleaning
(D-004) Vent Ducts (Galley and Pantry Room - All), Commercial Cleaning
(D-005) Vent Ducts (Laundry Exhaust), Commercial Cleaning
(D-006) Vent Ducts (All Other), Commercial Cleaning
(D-007) Compressed Air System Valves, Inspect and Test
(D-008) Anchor Windlass, Level 2 Inspect and Repair
(D-009) Warping Capstan, Level 2 Inspect and Repair
(D-010) Twin Pivot Arm Davit, Level 2 Inspect and Repair
(D-011) Helo Talon Grids, Inspect and Test
(D-012) Grey Water Holding Tanks, Clean and Inspect
(D-013) Sewage Piping, Clean and Flush
(O-014) Tanks (Fuel), Preserve "Partial"
(D-015) Water Tight Hatches (Internal DC Deck and Below), Renew
(D-016) Watertight Doors and Scuttles (External), Renew
(D-017) Sewage Holding Tanks, Clean and Inspect
(D-018) Ventilation Fans (Vaneaxial), Overhaul
(D-019) Bilge (JP 5 Pump Room), Preserve
(D-020) Hull and Structural Plating (Deck and Stack), Repair
(D-021) Emergency Diesel Generator (EDG) Exhaust Piping, Renew
(D-022) Pumps (Fire), Overhaul
(D-023) Sea Valves and Waster Pieces, Overhaul or Renew
(D-024) Flight Deck Net Latch Assemblies, Renew
(D-025) Portlights, Renew
(D-026) Pumps (Sewage), Renew
(D-027) Sewage Piping, Renew
(D-028) Windows (Bridge), Repair
(O-029) Tanks (Grey Water Holding), Preserve "Partial"
(O-030) Tanks (Sewage Holding), Preserve "Partial"
(O-00A) Composite Labor Rate
(D-00B) GFP Report
(D-00C) Travel and Per Diem
All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. All reference documents are available for viewing at 300 East Main Street, Suite 500, Norfolk, VA 23510-9101.
Drawings are now available on CD-ROM. The CD-ROM sets are available for all cutters and will be free of charge to contractors upon request [ten days from solicitation issuance]. SFLC must have ten (10) days advance notice to complete a CD-ROM set of drawings. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). All responsible sources may submit an offer, which shall be considered by the United States Coast Guard.
For information or questions regarding this acquisition or a copy of the CD-ROM, please contact Mable Lee, Contract Specialist, at (757) 628-4820 or [email protected] or Wanda Salmon, Contracting Officer, at (757) 628-4639 or [email protected].

Bid Protests Not Available