The United States Coast Guard Surface Forces Logistics Center, Contracting and Procurement Branch 1, intends to issue a Commercial Request for Quote (RFQ) for Dockside Repairs to USCGC DECISIVE (WMEC-629). The Coast Guard intends to conduct procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items. The NAICS Code is 336611 and the small business size standard is 1000 employees.

The acquisition will be issued as a 100% HUBZone Set-Aside, Best Value Request for Quote (RFQ) on or about August 1, 2013. The RFQ will be issued via the Federal Business Opportunity (FEDBIZOPPS) web page at www.fbo.gov. This requirement will be evaluated using past performance as an evaluation factor. Hard copies of the specification and solicitation will not be issued. It is incumbent upon contractors to monitor the FEDBIZOPPS web page for RFQ release and all subsequent amendments. FEDBIZOPPS also contains an optional automatic notification service.

A C-D ROM containing all applicable drawings will be available free of charge to contractors upon request no later than six (6) days from the solicitation issuance. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g. *.DWF, etc.)

All work will be performed at the vessels home pier in Pascagoula, MS.

The Coast Guard intents to award a fixed- price requirements contract. The scope of the acquisition will include but is not limited to:

WORK ITEM 1: Tanks (Aviation Fuel Service), Clean and Inspect
WORK ITEM 2: Tanks (Aviation Fuel Stowage and Overflow), Clean and Inspect
WORK ITEM 3: Tanks (MP Fuel Stowage and Overflow), Clean and Inspect
WORK ITEM 4: Tanks (Hydraulic Oil Stowage), Clean and Inspect
WORK ITEM 5: Tanks (Potable Water), Clean and Inspect
WORK ITEM 6: Tanks (Lube Oil), Clean and Inspect
WORK ITEM 7: Structural Supports and Deck Combing
WORK ITEM 8: Pilothouse Windows, Inspect and Test
WORK ITEM 9: Tanks (Dirty Oil and Waste), Clean and Inspect
WORK ITEM 10: Propulsion Shafting, Strain Gage Alignment Inspections
WORK ITEM 11: Vent Ducts (Engine, Machinery Rooms and Uptake Space), Commercial Cleaning
WORK ITEM 12: Vent Ducts (Galley and Pantry Room All), Commercial Cleaning
WORK ITEM 13: Vent Ducts (Laundry), Commercial Cleaning
WORK ITEM 14: Vent Ducts (All Other), Commercial Cleaning
WORK ITEM 15: Reverse Osmosis Desalination Plant, Overhaul
WORK ITEM 16: Anchor Windlass, Port and Starboard, Inspect and Service
WORK ITEM 17: Anchor Chain(s) and Ground Tackle, Inspect and Repair
WORK ITEM 18: Warping Capstan, Inspect and Service
WORK ITEM 19: Ammunition Elevator, Service and Inspect
WORK ITEM 20: Towing Bitts, Chocks, and Fairleads; Inspect and Test
WORK ITEM 21: Tanks (MP Fuel Service), Clean and Inspect
WORK ITEM 22: Chain Lockers, Clean and Inspect
WORK ITEM 23: Grey Water Holding Tanks, Clean and Inspect
WORK ITEM 24: Sewage Holding Tanks, Clean and Inspect
WORK ITEM 25: Pilothouse Doors, Renew
WORK ITEM 26: No. 1&2 SSDG and Shoretie, Inspect and Test
WORK ITEM 27: EM Shop Door and Frame, Renew
WORK ITEM 28: Laundry Room Deck
WORK ITEM 29: DC Repair II Annex Deck, Renew
WORK ITEM 30: CO Portlights, Overhaul
WORK ITEM 31: Watertight Fittings, Renew
WORK ITEM 32: Bridge Deck Drains, Piping and Surrounding Plating, Renew
WORK ITEM 33: Datos Joiner Panel Supports, Renew

Potential sources that intend to submit an offer for this acquisition must fully demonstrate that they have the engineering capability, design and technical expertise to accomplish the requirements stated in the above paragraph and are to supply pertinent information in sufficient detail to demonstrate a bona-fide capability to meet the requirements. Evidence of experience in work similar in type and scope will be required to include contract numbers, project title, dollar amount, points of contact and phone numbers.

The performance period is 57 days, with a start date on or about 04 December, 2013.