The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Part 13.5, Test Program for Certain Commercial Items. The simplified acquisition will be issued as a HubZone Set-Aside. Request for Quotes (RFQ) will be issued on or about August 26, 2014.
The acquisition is to perform dockside repairs to the USCGC MALLET (WLIC-75B). All work will be performed onboard the vessel at its homepier at: 1201 E Navigation, Corpus Christi, TX 78402. The anticipated Period of performance is thirty (30) calendar days from 6 January through 3 February 2015.
The solicitation will be issued electronically via the Federal Business Opportunity web page at http://www.fedbizopps.gov. It is incumbent upon contractors to monitor the FEDBIZOPS web page for the RFQ release and all subsequent amendments. Hard copies of the specification and solicitation will not be issued.
The scope of the acquisition is for the overhauling, renewing and repairing of various items aboard the USCGC MALLET (WLIC-75B). This work may include, but is not limited to:
WORK ITEM 1: Main Diesel Engine (MDE) Exhaust Stack Uptakes, Clean
WORK ITEM 2: Ship Service Diesel Generator (SSDG) Exhaust Piping, Commercial Clean
WORK ITEM 3: Tanks (Sewage Holding), Preserve "100%" - Tender
WORK ITEM 4: Watertight Hatches, Renew
WORK ITEM 5: Toilets, Renew
WORK ITEM 6: Boiler Exhaust Stack Uptakes, Commercial Clean
WORK ITEM 7: Spuds, Overhaul - Barge
WORK ITEM 8: Spud Wells, Inspect - Barge
WORK ITEM 9: Tanks (Potable Water), Preserve "100%" - Barge
WORK ITEM 10: Potable Water Shore Connection Piping, Renew
WORK ITEM 11: Forward Crossdeck Winch Foundation, Renew
WORK ITEM 12: Galley Supply Ventilation System Shroud, Renew
WORK ITEM 13: Boiler Hot Water Piping, Renew
WORK ITEM 14: Grey Water Drain Piping, Repair
WORK ITEM 15: #3 Spud Derrick Sheave Foundation Plate & Pin Tube, Renew
WORK ITEM 16: Plating and Structural Members (Various Locations), Repair
WORK ITEM 17: Shaft Seals Vent Line Gooseneck Replacement
WORK ITEM 18: Jetting Engine Exhaust Piping, Renew
WORK ITEM 19: Main Hold Ventilation Fan (Vaneaxial), Overhaul
WORK ITEM 20: Fuel Tank Sounding Tube, Renew
WORK ITEM 21: Searchlights, Renew
WORK ITEM 22: Laundry Room Deck Substrate Inspection
WORK ITEM 23: Spud Well Liner Retainer Brackets, Renew
WORK ITEM 24: Ship's Boiler, Clean & Inspect
WORK ITEM 25: Cross Deck & Spud Winches, Overhaul
WORK ITEM 26: Barge Diesel Engine Exhaust Piping, Clean
WORK ITEM 27: Barge Pad Eye, Plating, & Structural Members, Inspect
WORK ITEM 28: Umbilical Receptacles & Deck Penetrations, Tender, Replace
WORK ITEM 29: Umbilical Receptacles & Deck Penetrations, Barge, Replace
A CD-ROM containing all applicable drawings will be sent via U.S. mail, if requested. Send all requests to [email protected]. The CD-ROM sets are available of all cutters and will be free of charge to contractors upon request. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc).
Quotes are due on or about September 25, 2014 at 10:00 a.m. Eastern Standard Time and may be sent via:
Email: [email protected] or mailed to:
US Coast Guard
SFLC/C&P2/IBCT
Attn: Rebecca Brown
300 East Main Street, Suite 600
Norfolk, VA 23510-9102