STRAP, CHIN (NAVY AND COAST GUARD)
.

ADDITIONAL INFORMATION FOR MIL-S-17615:
.
INTERIM CHANGES TO MIL-S-17615E:
STRAP, CHIN, BLACK, 9 INCH TO 17 5/8 LONG
ADJUSTABLE WITH TYPE III, CLASS 1.
.
APPLICABLE DOCUMENTS: THE FOLLOWING LIST OF
DOCUMENTS IS APPLICABLE TO THIS PROCUREMENT:
.
PAGE 2, UNDER SPECIFICATIONS FEDERAL
DELETE L-P-375 AND REPLACE WITH ASTM-D1593
.
DELETE V-T-276 AND REPLACE WITH A-A-52094
DELETE UU-P-31, NO REPLACEMENT
DELETE MIL-B-17757 AND REPLACE WITH ASTM-D-5518
UNDER STANDARDS FEDERAL DELETE FED-STD-151 AND
REPLACE WITH ASTM-D498,
ASTM-E498, ASTM-427,ASTM E515
ASTMA630, ASTM-A376, ASTM-B-117, ASTM-A309,
ASTM-G69, ASTM-G47, ASTM-E1282,ASTM-E172
DELETE FED-STD-751 AND REPLACE WITH ASTM-D6193
UNDER STANDARDS MILITARY DELETE MIL-STD-105 AND
REPLACE WITH MIL-STD-1916.
.
PAGE 3, UNDER "OTHER PUBLICATIONS",
ADD THE FOLLOWING:
"AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI/ASQC Z1.4-SAMPLING PROCEDURES AND TABLES
FOR INSPECTION BY ATTRIBUTES
(APPLICATION FOR COPIES SHOULD BE OBTAINED FROM
THE AMERICAN NATIONAL STANDARDS INSTITUTE, 1430
BROADWAY, NEW YORK, NY 10018-3308").
.
PAGE 3 PARAGRAPH 3.3.2 LINE 2 AND LINE 3
DELETE L-P-375 AND REPLACE WITH ASTM-D1593.
.
.
PAGE 4, PARAGRAPH 3.3.6, LINE 2 DELETE
V-T-276 AND REPLACE WITH A-A-52094.
.
PAGE 4, PARAGRAPH 3.3.6.1 LINE 3 AND LINE 6
DELETE V-T-276 AND REPLACE WITH A-A-52094.
.
PAGE 5, PARAGRAPH 3.5.1 LINE 2, DELETE
FED-STD-751 AMD REPLACE WITH ASTM-D6193
.
PAGE 9, PARAGRAPH 4.4 LINE 2, DELETE
MIL-STD-105 AND REPLACE WITH MIL-STD-1916
.
PAGE 16, PARA. 4.4.2.3, LINES 7 AND 8,
IN AQL, COLUMN'S,
DELETE "2.5", "6.5" AND "4.0" AND SUBSTITUTE
"1.5", "4.0" AND "2.5" RESPECTIVELY.
.
PAGE 18, PARAGRAPH 5.2.1 LINE 4, DELETE
MIL-B-17757 AND REPLACE WITH ASTM-D-5118.
.
PAGE 18, PARAGRAPH 5.2.2 LINE 4, DELETE
MIL-B-17757 AND REPLACE WITH ASTM-D-5118
.
PAGE 18, PARAGRAPH 5.2.2.1, LINE 2, DELETE
MIL-B-17757 AND REPLACE WITH ASTM-D-5118.
INTERIM CHANGES TO A-A-52094:
.
PAGE 1, PARAGRAPH 1.1 CLASSIFICATION. ADD BELOW
"TYPE V" "TYPE VI - GIMP, HEAVY THREAD"
.
PAGE 2, TABLE I UNDER COLUMNS "TICKET NUMBER",
"TEX", "PLY", "YARDS PER POUND MINIMUM MAXIMUM",
AND "BREAKING STRENGTH", LINE 8 DELETE "30",
"60", "3", "7,087", "8,266", AND "3.2".
.
PAGE 2, TABLE I, UNDER "YARDS PER POUND" COLUMN,
AFTER "MAXIMUM", ADD "2/".
.
PAGE 2, TABLE I, BELOW "TICKET NUMBER 24", ADD
THE FOLLOWING UNDER THE INDICATED COLUMNS:
TICKET TEX PLY YARDS/LB BREAK STRENGTH
NUMBER APPROX MIN MAX POUNDS (MIN)
"20 90 4 4725 5511 4.5"
.
PAGE 2, BELOW FOOTNOTE 1/, ADD THE FOLLOWING:
"2/ MAXIMUM YIELD VARIANCE CAN BE INCREASED BY
8.0%.".
.
PAGE 3, TABLE III, UNDER "YARDS PER POUND/
MINIMUM", DELETE "993" AND SUBSTITUTE "940".
.
PAGE 3, FOLLOWING 2.1, INSERT THE FOLLOWING
PARAGRAPH: "2.1.1 MILDEW RESISTANT TREATMENT.
THE THREAD SHALL HAVE A MILDEW RESISTANT
TREATMENT IN ACCORDANCE WITH MIL-T-3530,
PARAGRAPHS 3.4.1, AND 3.4.1.1, WHEN SPECIFIED IN
THE ACQUISITION DOCUMENT."
.
THE FOLLOWING LIST IS APPLICABLE FOR CONVERTING
THREADS CITED IN V-T-276 TO THREADS CITED IN
A-A-52094:
TICKET NO. IN USE TICKET NO.
V-T-276 IN A-A-52094 COMMENT
20 24 -
36 30 -
40/4 40/3 -
60 NO TICKET 60 AVAILABLE
. IN V-T-276
36/3, TYPE IA2 30/3 SPECIFY COLOR "WHITE"
40/4, TYPE IA3 40/3 SPECIFY COLOR REQUIRED
60/3, TYPE IA3 NO TICKET 60 AVAILABLE
. IN V-T-276
20/4 (IB2) 16/4 (II) SPECIFY COLOR "WHITE"
20/4 (IB3) 16/4 (II) SPECIFY COLOR REQUIRED
40/4 (IB3) 40/3 (II) SPECIFY COLOR REQUIRED
40/4 (IB2) 40/3 (II) SPECIFY COLOR "WHITE"
36/4 (IB2) 30/3 (II) SPECIFY COLOR "WHITE"
36/4 (IB3) 30/3 (II) SPECIFY COLOR REQUIRED
.
PAGE 4, PARA. 3.3, END ITEM VISUAL EXAMINATION
LINE 13, DELETE "4.0" AND SUBSTITUTE "2.5".
.
PARA. 3.4 END ITEM TESTING, LINE 7,
DELETE "6.5" AND SUBSTITUTE "4.0".
.
PAGES 5 AND 6, PARAGRAPH 4.1 PACKAGING.;
PARAGRAPH 4.2 PACKING.; PARAGRAPH 4.3
PALLETIZATION.; PARAGRAPH 4.4 MARKING.; DELETE
IN THEIR ENTIRETY AND SUBSTITUTE:
"4.1 PRESERVATION, PACKING, AND MARKING. THE
PRESERVATION, PACKING, AND MARKING SHALL BE A
SPECIFIED IN THE CONTRACT OR PURCHASE ORDER."
.
PAGE 6, PARAGRAPH 5.2 SOURCE OF GOVERNMENT
DOCUMENTS. ADD BELOW "ARE AVAILABLE FROM"
"DODSSP - CUSTOMER SERVICE".
PAGE 6, PARAGRAPH 5.3. REPLACEMENT DATA.
LINE 4, UNDER "V-T-276" DELETE "AND IA3" AND
SUBSTITUTE "IA3, II AND IIA".
LINE 5, UNDER "V-T-276" DELETE "AND IB3" AND
SUBSTITUTE "IB3, IIA, AND IIIB".
.
INTERIM STANDARD SAMPLE FOR FOLIAGE GREEN 504
IDENTIFIED AS ROLL #3721 (THE FOLIAGE GREEN 502
AREA OF THE PATTERN), AND REFERENCED FOR SHADE
ONLY. THIS STANDARD IS TEMPORARY UNTIL FURTHER
NOTICE.
(Ref. 10072)
.

ADDITIONAL INFORMATION FOR L-P-375:
.
L-P-375D IS CANCELLED AND SUPERSEDED BY
ASTM-D1593.
.
ADDITIONAL INFORMATION FOR PPP-B-566:
.
NO ADDITIONAL INFORMATION FOLLOWS..
.
ADDITIONAL INFORMATION FOR PPP-B-676:
NO ADDITIONAL INFORMATION FOLLOWS..
.
ADDITIONAL INFORMATION FOR MIL-F-495:
.
NO ADDITIONAL INFORMATION FOLLOWS.
.
ADDITIONAL INFORMATION FOR MIL-DTL-13924:
.
NO ADDITIONAL INFORMATION FOLLOWS.
.
ADDITIONAL INFORMATION FOR MIL-B-17757:

MIL-B-17757 IS CANCELLED WITHOUT REPLACEMENT.
THE FOLLOWING DOCUMENTS ARE AUTHORIZED FOR USE IN LIEU
OF MIL-B-17757:
ASTM-D-5118, STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD SHIPPING BOXES, AND ASTM-D-1974, STANDARD PRACTICE FOR METHOD OF CLOSING, SEALING AND REINFORCING FIBERBOARD SHIPPING CONTAINERS.
(ref. T0857 - 6/15/06)

ADDITIONAL INFORMATION FOR FED-STD-15:
.
FED-STD-151 IS HEREBY
CANCELLED AND REPLACED WITH ASTM-D-498
SEE FED-STD-151B(2) NOT 3
.
ADDITIONAL INFORMATION FOR FED-STD-595C:
COPIES OF FED-STD-595 CAN BE OBTAINED FROM:
GENERAL SERVICES ADMINISTRATION - FEDERAL SUPPLY SERVICE BUREAU
SPECIFICATION SECTION, SUITE 8100
470 EAST L'ENFANT PLAZA, SW
WASHINGTON, DC 20407
PHONE (202) 619-8925.

CLIN 0002

STRAP, CHIN, WOVEN GOLD LACE, 3/8 INCH
WIDE; 9 INCH TO 17 5/8 LONG ADJUSTABLE
.

ADDITIONAL INFORMATION FOR MIL-S-17615:
.
THE CHIN STRAP, WOVEN GOLD LACE,
3/8 INCH WIDE, ADJUSTABLE LENGTH, SHALL BE IAW
TYPE I, CLASS 2 OF MIL-S-17615E (SA) DATED
18 JAN 1980. WITH INTERIM CHANGES BELOW.
.
INTERIM CHANGES TO MIL-S-17615E:
.
PAGE 2, UNDER SPECIFICATIONS FEDERAL
DELETE L-P-375 AND REPLACE WITH ASTM-D1593
DELETE V-T-276 AND REPLACE WITH A-A-52094
DELETE UU-P-31, UNDER SPEC MILITARY
DELETE MIL-B-17757 AND REPLACE WITH ASTM-D-5518,
UNDER STANDARDS FEDERAL DELETE FED-STD-151 AND
REPLACE WITH ASTM-E498, ASTM-E427, ASTM-E515,
ASTM-A630, ASTM-A309, ASTM-A376, ASTM-B-117
ASTM-G69, ASTM-G47, ASTME1282, ASTM-E172.
DELETE FED-STD-751 AND REPLACE WITH ASTM-D6193.
UNDER STANDARDS MILITARY DELETE MIL-STD-105 AND
REPLACE WITH MIL-STD-1916.
.
PAGE 3 PARAGRAPH 3.3.2 LINE 2 AND LINE 3
PAGE 3, UNDER "OTHER PUBLICATIONS",
ADD THE FOLLOWING:CESS AND RETURN TO MENU SCREEN
"AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI/ASQC Z1.4-SAMLING PROCEDURES AND TABLES
DELETE L-P-375 AND REPLACE WITH ASTM-D1593.
FOR INSPECTION BY ATTRIBUTES
(APPLICATION FOR COPIES SHOULD BE OBTAINED FROM
THE AMERICAN NATIONAL STANDARDS INSTITUTE,
1430 BROADWAY, NEW YORK, NY 100818-3308)
.
PAGE 4, PARAGRAPH 3.3.6, LINE 2 DELETE
V-T-276 AND REPLACE WITH A-A-52094.
.
PAGE 4, PARAGRAPH 3.3.6.1 LINE 3 AND LINE 6
DELETE V-T-276 AND REPLACE WITH A-A-52094.
.
PAGE 5, PARAGRAPH 3.5.1 LINE 2, DELETE
FED-STD-751 AND REPLACE WITH ASTM-D6193.
.
PAGE 9, PARAGRAPH 4.4 LINE 2, DELETE
MIL-STD-105 AND REPLACE WITH MIL-STD-1916.
.
PAGE 16, PARA. 4.4, LINES 7 AND 8 IN AQL,
COLUMN'S, DELETE "2.5". "6.5"AND"40" AND
SUBSTITUTE "1.5", "6.5" AND "2.5" RESPECTIVELY.
.
PAGE 18, PARAGRAPH 5.2.1 LINE 4, DELETE
MIL-B-17757 AND REPLACE WITH ASTM-D-5118.
.
PAGE 18, PARAGRAPH 5.2.2 LINE 4, DELETE
MIL-B-17757 AND REPLACE WITH ASTM-D-5118.
.
PAGE 18, PARAGRAPH 5.2.2.1, LINE 2, DELETE
MIL-B-17757 AND REPLACE WITH ASTM-D-5118.
(Ref. 10073)
.
ADDITIONAL INFORMATION FOR L-P-375:
.
L-P-375D IS CANCELLED AND SUPERSEDED BY
ASTM-D1593.
.
ADDITIONAL INFORMATION FOR A-A-52094A:

NO ADDITIONAL INFORMATION
(ref. T1481)

ADDITIONAL INFORMATION FOR UU-P-31:
.
NO ADDITIONAL INFORMATION FOLLOWS.
.
ADDITIONAL INFORMATION FOR PPP-B-566:
.
NO ADDITIONAL INFORMATION FOLLOWS..
.
ADDITIONAL INFORMATION FOR PPP-B-676:
NO ADDITIONAL INFORMATION FOLLOWS..
.
ADDITIONAL INFORMATION FOR PPP-T-45:

PPP-T-45 IS CANCELLED AND SUPERSEDED BY A-A-1671: TAPE, GUMMED
(PAPER, REINFORCED, LAMINATED)

NOTE: A-A-1671 IS WRITTEN TO BE APPLIED TO PPP-T-45'S REQUIREMENTS OF TYPE III, CLASS B.

(ref. T0592 - 9/11/06)

ADDITIONAL INFORMATION FOR MIL-F-495:
.
NO ADDITIONAL INFORMATION FOLLOWS.
.
ADDITIONAL INFORMATION FOR MIL-L-17507:
.
NO ADDITIONAL INFORMATION
ADDITIONAL INFORMATION FOR MIL-B-17757:

MIL-B-17757 IS CANCELLED WITHOUT REPLACEMENT.
THE FOLLOWING DOCUMENTS ARE AUTHORIZED FOR USE IN LIEU
OF MIL-B-17757:
ASTM-D-5118, STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD SHIPPING BOXES, AND ASTM-D-1974, STANDARD PRACTICE FOR METHOD OF CLOSING, SEALING AND REINFORCING FIBERBOARD SHIPPING CONTAINERS.
(ref. T0857 - 6/15/06)

ADDITIONAL INFORMATION FOR MIL-DTL-13924:
.
NO ADDITIONAL INFORMATION FOLLOWS.
.
ADDITIONAL INFORMATION FOR FED-STD-15:
.
FED-STD-151 IS HEREBY
CANCELLED AND REPLACED WITH ASTM-D-498
SEE FED-STD-151B(2) NOT 3
.
ADDITIONAL INFORMATION FOR FED-STD-311:
INTERIM CHANGES FROM FED-STD-311:
INTERIM CHANGE FROM CH NOT 1, 8/27/71:
SECTION 4, PARA. 4.5.1.2, LINE 8: DELETE THE PERIOD AFTER "BACKBONE" AND ADD "AND TO INDICATE THE ROOT OF THE TAIL".

INTERIM CHANGE FROM TEST METHOD 7011.1:
PARA. 4.1.2: DELETE ENTIRELY AND SUBSTITUTE THE FOLLOWING: "4.1.2 INDICATING DEVICE. THE INDICATING DEVICE SHALL BE EITHER OF THE KINDS LISTED BELOW.

4.1.2.1 THE SHRINKAGE METER DIAL. A DIAL INDICATOR HAVING A FACE DIVIDED INTO 360-380 DEGREES, WITH ONE REVOLUTION OF THE DIAL HAND CORRESPONDING TO 0.5 INCHES (12.7 MM) SPECIMEN MOVEMENT, WITH LEEWAY FOR FOUR REVOLUTIONS.

4.1.2.2 AGD DIAL INDICATOR. A MECHANICAL DEVICE CAPABLE OF REGISTERING ON A SCALE READING OF THE SHRINKAGE OR SWELLING RATIO OF THE SPECIMEN IN A RATIO OF 25 UNITS OF DIAL MOVEMENT TO ONE UNIT OF SPECIMEN MOVEMENT, OR GREATER, AND SHALL ACCURATELY DETECT THE POINT AT WHICH SHRINKAGE BEGINS BY THE MOVEMENT OF THE DIAL NEEDLE. THE INDICATOR SHALL HAVE A SPINDLE CAPABLE OF ATTACHMENT TO THE SPECIMEN AND TO THE ADJUST- ABLE WEIGHT ASSEMBLY (SEE 4.1.11)."

PARA. 4.1.3: DELETE "HEATING COIL" AND INSERT "IMMERSION HEATER".

PARA.7.1: DELETE ENTIRELY AND SUBSTITUTE THE FOLLOWING:
"7.1 THE THERMOMETERS MAY BE PURCHASED FROM THE THOMAS SCIENTIFIC CO. OR FISHER SCIENTIFIC CO., EACH HAVING REGIONAL OFFICES.

7.2 DIAL INDICATORS MAY BE PURCHASED FROM B. C. AMES CO., LEXINGTON STREET, WALTHAM, MA 02254."
(ref. T0211 - 5/23/06)

ADDITIONAL INFORMATION FOR FED-STD-595C:
COPIES OF FED-STD-595 CAN BE OBTAINED FROM:
GENERAL SERVICES ADMINISTRATION - FEDERAL SUPPLY SERVICE BUREAU
SPECIFICATION SECTION, SUITE 8100
470 EAST L'ENFANT PLAZA, SW
WASHINGTON, DC 20407
PHONE (202) 619-8925.

ADDITIONAL INFORMATION: FED-STD-751 HAS BEEN
CANCELLED AND REPLACED BY ASTM-D-6193, 4/98
STANDARD PRACTICES FOR STITCHES AND SEAMS.
THIS STANDARD SHOULD BE USED IN PREFERENCE
TO FED-STD-751.
(ref. T0216 - May 18, 2006)