Federal Bid

Last Updated on 29 Jun 2010 at 8 AM
Sources Sought
Tinker air force base Oklahoma

Chrome Free Slurry Applied Paint Silicon-Aluminide for DoD Maintenance, Repair, and Overhaul (MRO) Operations

Solicitation ID LP820
Posted Date 01 Jun 2010 at 7 PM
Archive Date 29 Jun 2010 at 5 AM
NAICS Category
Product Service Code
Set Aside No Set-Aside Used
Contracting Office Pk/Pz Tinker Afb
Agency Department Of Defense
Location Tinker air force base Oklahoma United states
This is a reposting of LP18SOURCES SOUGHT SYNOPSIS

327ASW/YP-LP820

Chrome Free Slurry Applied Paint Silicon-Aluminide
for
DoD Maintenance, Repair and Overhaul (MRO) Operations


CAUTION:

This is a SOURCES SOUGHT notice. This is NOT a solicitation for proposals, proposal abstracts, or quotations.

The Oklahoma City Air Logistics Center (OC-ALC), 327ASW, Director of Propulsion (YP), Tinker Air Force Base, Oklahoma is seeking sources that may be capable of supplying a zero chrome containing, zero phosphine gas producing, slurry applied paint silicon-aluminide product that, when applied per manufacturer's instructions, shall protect gas turbine engine components from hot section corrosion, oxidation, and sulfidation. Product must be suitable for application by spraying or dipping. The product must be a TRL 9 and have garnered at least one approval from a major engine original equipment manufacturer.. A site visit may be performed as a means to verify TRL and source capabilities.

This is a sources/information request.

Contractors/institutions responding to this sources sought are placed on notice that participation in this survey may not ensure participation in future solicitations or contract awards. The government will not reimburse participants for any expenses associated with participation in this survey. The Government reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate.

Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted.

INSTRUCTIONS:

1. Below is a general description of the requirements, a request for your business information, and a Contractor Capability Survey which allows you to provide your company's capabilities

2. If, after reviewing these documents, you desire to participate in the market research, you should provide documentation that supports your company's capabilities in meeting these requirements. Failure to provide documentation may result in the Government being unable to adequately assess your capabilities

3. Both large and small businesses are encouraged to participate in this market research. Joint ventures or teaming arrangements are acceptable and up to each industry partner. Team members must be identified to include credentials

4. Previous responses to this sources sought need not respond and will be considered in this revision. Previously posted as PEWG project LP18.

5. Questions relative to this market research should be addressed to Tony Veal, 639ASCG/PK,[email protected],405.734.6724

6. Questions relative to the Propulsion Environmental Working Group (PEWG) should be addressed to Mickey Conklin, [email protected], 405.739.7773

 

PURPOSE/DESCRIPTION:

We are conducting market research (Phase One) to identify potential sources that may possess the expertise, capabilities, and experience to specify and qualify an advanced coating meeting DoD MRO and/or OEM specifications and administered at Tinker Air Force Base, Oklahoma and/or Hill Air Force Base, Utah for fielded Air Force weapons systems.

 


CONTRACTOR CAPABILITY SURVEY

Part I. Business Information

Please provide the following business information for your company/institution and for any teaming or joint venture partners:

• Company/Institute Name:
• Address:
• Point of Contact:
• CAGE Code:
• DUNS Number:
• Phone Number:
• E-mail Address:
• Web Page URL:
• Size of business pursuant to North American Industry Classification System (NAICS) Code 332810, 332812, 333298, 333411, 333519, 333618, 336411, 336412, 336413, 541330, or 541990 (others could apply)
Based on the above NAICS Code, state whether your company is:
 Small Business
 Woman Owned Small Business
 Small Disadvantaged Business
 8(a) Certified
 HUBZone Certified
 Veteran Owned Small Business
 Service Disabled Small Business
• Central Contractor Registration (CCR)
• A statement as to whether your company is domestically or foreign owned (if foreign, please indicate the country of ownership).

Part II. Capability Survey Questions

Describe your past experience for designing, engineering, installing, demonstrating, validating, qualifying, and activating military aircraft component coating applications:
• Program name
• Government or contractor POC
• Detailed description of the products and device(s)
• Quantities produced
• Production schedule for both past programs and estimate for this one
• Cost of past efforts and estimate for this one
• Risks envisioned with this effort

INFORMATION SUBMISSION INSTRUCTIONS:

Responses must be received no later than close of business 16 June 2010. Submit responses electronically, via email, to [email protected] in MS Word or Adobe Portable Document Format (PDF) not to exceed 3 single sided pages presented in single-space using a 12-font size minimum.

CONFIDENTIALITY:

No proprietary, classified, confidential, or sensitive information should be included in the response. The Government reserves the right to use any non-proprietary technical information in any resulting solicitation(s).

Bid Protests Not Available

Similar Past Bids

Location Unknown 06 Apr 2010 at 8 PM
Oak ridge Tennessee 24 Jan 2002 at 5 AM
Location Unknown 26 Jun 2009 at 6 PM
Location Unknown 22 Apr 2003 at 5 AM
Location Unknown 18 Nov 2002 at 5 AM

Similar Opportunities

Pennsylvania 31 Dec 2099 at 6 PM
Pennsylvania 31 Dec 2099 at 6 PM
Oklahoma 30 Jul 2025 at 4 AM (estimated)
Oklahoma 30 Jul 2025 at 4 AM (estimated)
Chambersburg Pennsylvania 01 Aug 2025 at 4 PM