Please review the NSN information below, including all technical requirements. If your company is able to manufacture these tires, complete and return the attached market survey & spreadsheet directly to the Contract Specialist, Robert Varcho, at [email protected]. This information must be provided by the response date of January 6, 2017.

Additional information can be accessed through the following link, and doing a query for CL16348007 in the solicitation field:
https://pcf1.bsm.dla.mil/cfolders

Thank you in advance for your assistance.

2610-00-050-9560
TIRE, PNEUMATIC, VEHICLE

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

X/GP-1/TYBB/CL-2/4.10-6/B

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE UBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.

** EXCEPTION: This shelf life item is Non-Extendable, Code S, with a total shelf life of sixty months. Material furnished under this contract/order shall have at least 42 months of shelf life remaining at time of delivery. **

TIRE CHARACTERISTICS
SPECIFICATION: ZZ-T-410
TIRE SIZE DESIGNATION: 4.10-6 NUMERIC
TIRE STRENGTH: LOAD RANGE B
MAXIMUM INFLATION PRESSURE: 50 PSI
TIRE LOAD MAXIMUM CAPACITY: 535 LBS
TIRE CONSTRUCTION: BIAS
TREAD DESIGN: RIBBED
SERVICE TYPE: INDUSTRIAL IMPLEMENT
MATERIAL: NATURAL RUBBER
TIRE AIR RETENTION METHOD: TUBE TYPE
FLAP: NO
GROUP: 1
VEHICLE APPLICATION: USAF HYDRAULIC CARTS

" PER ESA (TARDEC) IN THE EVENT THAT A TUBE TYPE TIRE IS NOT AVAILABLE, YOU MAY USE A TUBELESS TIRE WITH A TUBE FOR THIS APPLICATION.

IAW BASIC UNK ZZ-T-410F NOT 2
REVISION NR F DTD 06/18/2015
PART PIECE NUMBER: XG-P-1/TYBA/CL-2/4.10-6/B

IAW REFERENCE STD NR MIL-STD-129R
REVISION NR R DTD 02/18/2014
PART PIECE NUMBER:

IAW REFERENCE UNK QPL-ZZ-T-410-1
REVISION NR 1 DTD 11/30/1981
PART PIECE NUMBER:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

MOP CODE ZZ = PACKAGING SHALL BE IAW MIL-DTL-4.

2610-00-051-1580
TIRE, PNEUMATIC, VEHICLE MIL-DTL-4M

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

X/GP3/CLF-2/TYBB/7.50-16/C

** EXCEPTION: This shelf life item is Non-Extendable, Code S, with a total shelf life of sixty months. Material furnished under this contract/order shall have at least 42 months of shelf life remaining at time of delivery. **

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.

TIRE CHARACTERISTICS
SPECIFICATION: ZZ-T-1619
TIRE SIZE DESIGNATION: 7.50-16
TIRE STRENGTH: LOAD RANGE C
MAXIMUM INFLATION PRESSURE: 36 PSI
TIRE LOAD MAXIMUM CAPACITY: 2250 LBS
TIRE CONSTRUCTION: BIAS
TREAD DESIGN: RIBBED
SERVICE TYPE: AGRRICULTURAL IMPLEMENT
MATERIAL: NATURAL RUBBER
TIRE AIR RETENTION METHOD: TUBE TYPE
FLAP: YES
GROUP: 3
VEHICLE APPLICATION: AGRRICULTURAL IMPLEMENT

MIL-DTL-4M

10 January 1997

3.3.2.1.4 Tires with flaps.

Flaps shall be rolled and placed inside the tire. When the size of the rolled flap and normal distance between beads assure that flap will remain in place during normal handling and transportation, no tying is required. When the size of the rolled flap is such that it will not be securely held within the tire, it shall be secured within the tire using twine conforming to A-A-228 or A-A-145 1, or nonmetallic strapping
conforming to ASTM D3950, in such a manner as to assure safe delivery. When it is too difficult to insert the rolled flap within the tire, it shall be secured within the tire in the normal installed position. Safe
transportation shall be ensured by securing flaps within the tire using twine conforming to A-A-228 or A-A-145 1, or nonmetallic strapping conforming to ASTM D3950.

IAW BASIC UNK ZZ-T-1619C NOT 2
REVISION NR C DTD 06/18/2015
PART PIECE NUMBER: X/GP3/CLF-2/TYBB/7.50-16/C

IAW REFERENCE STD NR MIL-STD-129R
REVISION NR R DTD 02/18/2014
PART PIECE NUMBER:

IAW REFERENCE UNK QPL-ZZ-T-1619-2(2) SUP 1
REVISION NR 2 DTD 05/01/1978
PART PIECE NUMBER:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:00
WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X
UNIT CONT:E5 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

2610-00-102-0968
TIRE, PNEUMATIC, VEHICLE

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

X/GP1/CLR-2/TYBA/18x8.50-8/B

** EXCEPTION: This shelf life item is Non-Extendable, Code S, with a total shelf life of sixty months. Material furnished under this contract/order shall have at least 42 months of shelf life remaining at time of delivery. **

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.

TIRE CHARACTERISTICS
SPECIFICATION: ZZ-T-1619
TIRE SIZE DESIGNATION: 18X8.50-8 NUMERIC
TIRE STRENGTH: 4 PLY
MAXIMUM INFLATION PRESSURE: 22 PSI
TIRE LOAD MAXIMUM CAPACITY: 815 LBS
TIRE CONSTRUCTION: BIAS
TREAD DESIGN: GRIP EXTRA DEEP
SERVICE TYPE: AGRICULTURAL GARDEN TRACTOR
MATERIAL: NATURAL RUBBER
TIRE AIR RETENTION METHOD: TUBELESS TYPE
FLAP: NO
GROUP: 1
VEHICLE APPLICATION: MC-130, MD-1 AF TOWBAR

IAW BASIC UNK ZZ-T-1619C NOT 2
REVISION NR C DTD 06/18/2015
PART PIECE NUMBER: X/GP1/CLR-2/TYBA/18-8.50-8/B

IAW REFERENCE STD NR MIL-STD-129R
REVISION NR R DTD 02/18/2014
PART PIECE NUMBER:

IAW REFERENCE UNK QPL-ZZ-T-1619-2(2) SUP 1
REVISION NR 2 DTD 05/01/1978
PART PIECE NUMBER:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP:001 PRES MTHD:ZZ CLNG/DRY:X PRESV MAT:XX
WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X
UNIT CONT:XX OPI:A
INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008
MOP CODE ZZ = PACKAGING SHALL BE IAW MIL-DTL-4

2610-00-237-3045
TIRE, PNEUMATIC, VEHICLE

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

X/GP1/TYBA/CL2/4.80/4.00-8/C

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.

** EXCEPTION: This shelf life item is Non-Extendable, Code S, with a total shelf life of sixty months. Material furnished under this contract/order shall have at least 42 months of shelf life remaining at time of delivery. **

TIRE CHARACTERISTICS
SPECIFICATION: ZZ-T-410
TIRE SIZE DESIGNATION: 4.80-4.00-8 NUMERIC
TIRE STRENGTH: LOAD RANGE C
MAXIMUM INFLATION PRESSURE: 100 PSI
TIRE LOAD MAXIMUM CAPACITY: 970 LBS
TIRE CONSTRUCTION: BIAS
TREAD DESIGN: RIBBED
SERVICE TYPE: INDUSTRIAL AND UNDERGROUND MINING TIRES
MATERIAL: NATURAL RUBBER
TIRE AIR RETENTION METHOD: TUBELESS TYPE
FLAP: NO
GROUP: 1
VEHICLE APPLICATION: VARIOUS
IAW BASIC UNK ZZ-T-410F NOT 2
REVISION NR F DTD 06/18/2015
PART PIECE NUMBER: X/GP1/TYBA/CL2/4.80/4.00-8/C

IAW REFERENCE STD NR MIL-STD-129R
REVISION NR R DTD 02/18/2014
PART PIECE NUMBER:

IAW REFERENCE UNK QPL-ZZ-T-410-1
REVISION NR 1 DTD 11/30/1981
PART PIECE NUMBER:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP:001 PRES MTHD:ZZ CLNG/DRY:X PRESV MAT:XX
WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X
UNIT CONT:XX OPI:A
INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

MOP CODE ZZ = PACKAGING SHALL BE IAW MIL-DTL-4.

2610-00-528-9701
TIRE, PNEUMATIC, VEHICLE

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

X/GP1/CL2/TYBB/4.00/4.80-8/B

** EXCEPTION: This shelf life item is Non-Extendable, Code S, with a total shelf life of sixty months. Material furnished under this contract/order shall have at least 42 months of shelf life remaining at time of delivery. **

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.

TIRE CHARACTERISTICS
SPECIFICATION: ZZ-T-410
TIRE SIZE DESIGNATION: 4.00-8 NUMERIC
TIRE STRENGTH: LOAD RANGE B
MAXIMUM INFLATION PRESSURE: 65 PSI
TIRE LOAD MAXIMUM CAPACITY: 810 LBS
TIRE CONSTRUCTION: BIAS
TREAD DESIGN: HIGHWAY REGULAR (RIB) CLASS 2
SERVICE TYPE: INDUSTRIAL STEERING WHEEL
MATERIAL: NATURAL RUBBER
TIRE AIR RETENTION METHOD: TUBE TYPE
FLAP: YES
GROUP: 1
SPECIAL FEATURES: DUAL SIZE 4.00/4.80-8
VEHICLE APPLICATION: HIGHWAY REGULAR (RIB) CLASS 2

MIL-DTL-4M

10 January 1997

3.3.2.1.4 Tires with flaps.

Flaps shall be rolled and placed inside the tire. When the size of the rolled flap and normal distance between beads assure that flap will remain in place during normal handling and transportation, no tying is required. When the size of the rolled flap is such that it will not be securely held within the tire, it shall be secured within the tire using twine conforming to A-A-228 or A-A-145 1, or nonmetallic strapping
conforming to ASTM D3950, in such a manner as to assure safe delivery. When it is too difficult to insert the rolied flap within the tire, it shall be secured within the tire in the normal installed position. Safe
transportation shall be ensured by securing flaps within the tire using twine conforming to A-A-228 or A-A-145 1, or nonmetallic strapping conforming to ASTM D3950.

IAW BASIC UNK ZZ-T-410F NOT 2
REVISION NR F DTD 06/18/2015
PART PIECE NUMBER: X/GP1/CL2/TYBB/4.00/4.80-8/B

IAW REFERENCE STD NR MIL-STD-129R
REVISION NR R DTD 02/18/2014
PART PIECE NUMBER:

IAW REFERENCE UNK QPL-ZZ-T-410-1
REVISION NR 1 DTD 11/30/1981
PART PIECE NUMBER:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP:001 PRES MTHD:ZZ CLNG/DRY:X PRESV MAT:XX
WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X
UNIT CONT:XX OPI:A
INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

MOP CODE ZZ = PACKAGING SHALL BE IAW MIL-DTL-4

2610-00-618-5676
TIRE, PNEUMATIC, VEHICLE

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

X/GP3/CLI-1/TYBB/7.50-16/E

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.

** EXCEPTION: This shelf life item is Non-Extendable, Code S, with a total shelf life of sixty months. Material furnished under this contract/order shall have at least 42 months of shelf life remaining at time of delivery. **

TIRE CHARACTERISTICS
SPECIFICATION: ZZ-T-1619
TIRE SIZE DESIGNATION: 7.50-16
TIRE STRENGTH: LOAD RANGE E
MAXIMUM INFLATION PRESSURE: 56 PSI
TIRE LOAD MAXIMUM CAPACITY: 2710 LBS
TIRE CONSTRUCTION: BIAS
TREAD DESIGN: RIBBED
SERVICE TYPE: AGRRICULTURAL IMPLEMENT
MATERIAL: NATURAL RUBBER
TIRE AIR RETENTION METHOD: TUBE TYPE
FLAP: YES
GROUP: 3
VEHICLE APPLICATION: AGRRICULTURAL IMPLEMENT

"Item purchased according to performance specification, not Qualified Products List (QPL). A copy of the QPL is provided for reference purposes only"

MIL-DTL-4M

10 January 1997

3.3.2.1.4 Tires with flaps.

Flaps shall be rolled and placed inside the tire. When the size of the rolled flap and normal distance between beads assure that flap will remain in place during normal handling and transportation, no tying is required. When the size of the rolled flap is such that it will not be securely held within the tire, it shall be secured within the tire using twine conforming to A-A-228 or A-A-145 1, or nonmetallic strapping
conforming to ASTM D3950, in such a manner as to assure safe delivery. When it is too difficult to insert the rolied flap within the tire, it shall be secured within the tire in the normal installed position. Safe
transportation shall be ensured by securing flaps within the tire using twine conforming to A-A-228 or A-A-145 1, or nonmetallic strapping conforming to ASTM D3950.

IAW BASIC UNK ZZ-T-1619C NOT 2
REVISION NR C DTD 06/18/2015
PART PIECE NUMBER: X/GP3/CLI-1/TYBB/7.50-16/E
IAW REFERENCE STD NR MIL-STD-129R
REVISION NR R DTD 02/18/2014
PART PIECE NUMBER:

IAW REFERENCE UNK QPL-ZZ-T-1619-2(2) SUP 1
REVISION NR 2 DTD 05/01/1978
PART PIECE NUMBER:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP:001 PRES MTHD:ZZ CLNG/DRY:X PRESV MAT:XX
WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X
UNIT CONT:XX OPI:A
INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

MOP CODE ZZ = PACKAGING SHALL BE IAW MIL-DTL-4

2610-01-470-4615
TIRE, PNEUMATIC, VEHICLE

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

X/GP1/CLR-3/TYBA/14.9-24/6PR

TYPE I, 72 MONTHS SHELF LIFE

** EXCEPTION: This shelf life item is Non-Extendable, Code I, with a total shelf life of seventy two months. Material furnished under this contract/order shall have at least 48 months of shelf life remaining at time of delivery.

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE UBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.

TIRE CHARACTERISTICS
SPECIFICATION: ZZ-T-1619
TIRE SIZE DESIGNATION: 14.90-24
TIRE STRENGTH: LOAD RANGE C
MAXIMUM INFLATION PRESSURE: 20 PSI
TIRE LOAD MAXIMUM CAPACITY: 3000 LBS
TIRE CONSTRUCTION: BIAS
TREAD DESIGN: DIAMOND
SERVICE TYPE: TRACTOR DRIVE WHEEL
MATERIAL: SYNTHETIC RUBBER
TIRE AIR RETENTION METHOD: TUBELESS TYPE
FLAP: NO
GROUP:
VEHICLE APPLICATION: CONST. EQUIP VIBRATORY ROLLERS

IAW BASIC UNK ZZ-T-1619C NOT 2
REVISION NR C DTD 06/18/2015
PART PIECE NUMBER: X/GP1/CLR-3/TYBA/14.9-24/6PR

IAW REFERENCE STD NR MIL-STD-129R
REVISION NR R DTD 02/18/2014
PART PIECE NUMBER:

IAW REFERENCE UNK QPL-ZZ-T-1619-2(2) SUP 1
REVISION NR 2 DTD 05/01/1978
PART PIECE NUMBER:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP: 001 PRES MTHD:ZZ CLNG/DRY:X PRESV MAT:XX
WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X
UNIT CONT:XX OPI:A
INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

MOP CODE ZZ = PACKAGING SHALL BE IAW MIL-DTL-4.

 

 

 

 

 

 

 

Bid Protests Not Available