G
PR: 0044631807
PGC: 11271
ITEM DESCRIPTION:
CLOTH, PLAIN WEAVE, GLASS, 14.5 OZ PER SQUARE
YARD MINIMUM, NATURAL (BOTH SIDES), FIRE
RESISTANT, 60 INCH WIDTH, TYPE I, CLASS 6.
ADDITIONAL INFORMATION FOR MIL-C-20079H:
.
NO ADDITIONAL INFORMATION FOLLOWS.
.
INTERIM CHANGES TO MIL-C-20079H:
.
PAGE 12
PARA. 4.4.1, LINE 6, AFTER '(SEE 4.4.1.1)';
ADD 'ANY PENETRATING DEFECT SHALL NOT BE
SCORED ON THE OPPOSITE SIDE.'.
.
PAGE 13 AND 14,
PARA. 4.4.1.1, DEFECTS IN ROLLS,
LINE 1, DELETE 'TABLES VII AND VIII' AND
SUBSTITUTE 'TABLES VI AND VII'.
LINE 5, DELETE '2.5' AND 6.5' AND SUBSTITUTE
'1.5' AND '4.0'.
LINE 7, DELETE '4.0' AND '10.0' AND
SUBSTITUTE '2.5' AND 6.5'.
LINE 8, DELETE '1.5' AND '6.5' AND SUBSTITUTE
'1.0' AND '4.0'; LINE 15, DELETE '4.0' AND
LINE 15, DELETE '4.0' AND SUBSTITUTE '2.5'.
.
PAGE 14,
PARA. 4.4.1.2 LENGTH OF ROLLS,
LINE 3 DELETE '4.0' AND SUBSTITUTE '2.5'.
.
PAGE 15,
PARA. 4.4.2.1 VISUAL DEFECTS,
LINE 3, DELETE '1.0' AND SUBSTITUTE '0.65'.
LINE 4, DELETE '6.5' AND SUBSTITUTE '4.0'.
.
PARA. 4.4.2.2 LENGTH (FOR A HOLDER),
LINE 3, DELETE '4.0' AND SUBSTITUTE '2.5'.
.
PARA. 4.4.2.3 NET WEIGHT (FOR A HOLDER)
LINE 5, DELETE '4.0' AND SUBSTITUTE '2.5'.
.
PARA. 4.5.1 CLOTH AND TAPE, LINE 7, AFTER
'IN NUMBER OF ROLLS.' ADD NEW SENTENCE,
'THE AQL FOR THESE CHARACTERISTICS SHALL BE
4.0'.
.
PARA. 4.5.2 THREAD, LINE 3, DELETE '6.5' AND
SUBSTITUTE '4.0'.
.
PAGE 18,
PARA. 4.6.11.2, SENTENCE 2, DELETE AND
SUBSTITUTE 'THE STANDARD SAMPLE SIZE SHALL BE
1/8 INCH IN THICKNESS. TAPES WIDER THAN 2
INCHES SHALL BE TRIMMED TO 2 INCHES'.
.
PAGE 21
PARA. 5.2.2, LINE 3, DELETE 'OR CLASS WEATHERRESISTANT'.
LINE 4, DELETE 'METHOD I' AND
SUBSTITUTE 'METHOD II'.
.
ADD NEW PARAGRAPH:
'5.2.2.1 WEATHER-RESISTANT GRADE FIBERBOARD
SHIPPING CONTAINER. WHEN SPECIFIED (SEE 5.1),
THE SHIPPING CONTAINER SHALL BE WEATHERRESISTANT.
BOX CLOSURES SHALL BE AS SPECIFIED
FOR METHOD III IN ACCORDANCE WITH THE APPENDIX
OF THE BOX SPECIFICATION.'.
.
ADDITIONAL INFORMATION FOR FED-STD-191:
FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS
HEREBY INACTIVE
FOR NEW DESIGN. WHEN NOT USIHNG FED-STD-191,
SEE INTERIM CHANGES END ITEM SPECIFICATION FOR
REPLACEMENT ASTM.
INTERIM CHANGES TO FED-STD-191A:
TEST METHOD 5202, PARA. 5.3, DELETE FIRST
SENTENCE AND SUBSTITUTE: 'THE SPECIMEN SHALL BE
CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE
OUTER EDGE OF THE VISE, SUCH THAT ONE INCH OF
SPECIMEN LIES WITHIN THE CLAMP AND ONE INCH OF
THE SPECIMEN EXTENDS BEYOND THE CENTER OF
ROTATION (FACE OF THE VISE), AND WITH THE LONG
EDGE PARALLED TO THE FACE OF THE DIAL PLATE).
TEST METHOD 5309.1 ABRASION RESISTANCE OF
TEXTILE WEBBING.
PAGE 1, PARA 4.1.2,LINE 4: DELETE 'B-97' AND
SUBSTITUTE 'B-91'.
THE FOLLOWING METHODS ARE IDENTIFIED AS
SPECIFYING OZONE DEPLETING SUBSTANCES: 1100,
1200, 1240, 1400, 1410, 1500, 1510,1520,1530,
1540, AND 1550. PARA 5.1 OF THESE TEST METHODS
REQUIRE THE USE OF 1,1,1- TRICHLOROETHANE,
ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN
OZONE DEPLETING SUBSTANCE (METHYL CHLOROFORM)
AND IS THEREFORE PROHIBITED. THE USE OF EITHER
ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS
ARE IN BASIC OR ANY REFERENCED DOCUMENT.
METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL;
CANTILEVER BENDING METHOD. PAGE 2, PARA. 5.3
DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE
FOLLOWING: 'THE SPECIMEN SHALL BE CLAMPED
FIRMLY, WITH 1 END FLUSH WITH THE OUTER EDGE OF
THE VISE, SUCH THAT 1' OF THE SPECIMEN LIES
WITHIN THE CLAMP AND 1' OF THE SPECIMEN EXTENDS
BEYOND THE CENTER OF ROTATION (INNER FACE OF THE
VISE)
AND WITH THE LONG EDGE PARALLEL TO THE FACE OF
THE DIAL PLATE.'
METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR
TEXTILE MATERIALS, PAGE 5, PARA. 5.2.2, LINE 8:
DELETE SENTENCE BEGINNING WITH 'THE SPECIMENS
AND BALLAST' IN ITS ENTIRETY AND SUBSTITUTE WITH
THE FOLLOWING: 'THE SPECIMENS AND BALLAST SHALL
BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN
A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF
140-180 DEG. F. THIS TEMPERATURE RANGE
CORRESPONDS TO A SETTING OF 'HIGH' ON THE
TEMPERATURE INDICATOR ON THE DRYER. DRYING
SHALL CONTINUE FOR 45-60 MINUTES OR UNTIL
SAMPLES ARE DRY IN A ROTATING TUMBLE DRYER.'
PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE
BEGINNING WITH 'THE SPECIMENS AND BALLAST' IN
ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:
'THE SPECIMENS AND BALLAST SHALL BE SEPARATED,
OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED
DRYER HAVING A STACK TEMPERATURE OF 140-180 DEG.
F. THIS TEMPERATURE RANGE CORRESPONDS TO A
SETTING OF 'HIGH' ON THE TEMPERATURE INDICATOR
ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40
MINUTES OR UNTIL SAMPLE ARE DRY.'
METHOD 5931, ELECTROSTATIC DECAY OF FABRICS;
DETERMINATION OF PAGE 1, PARA. 3: AFTER 'NUMBER
OF DETERMINATIONS' ADD 'PER SAMPLE UNIT'. PAGE
1, PARA. 4: DELETE 'APPARTUS' AND SUBSTITUTE
'APPARATUS'. PAGE 1, PARA. 5.1, LINE 3: AFTER
'AT' DELETE 'APPROXIMATELY'.
PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER 'OF'
ADD '+-'. LINE 6: AFTER 'TO' ADD '+-'.
PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND
SUBSTITUTE WITH THE FOLLOWING: '5.3 MOUNT A
SPECIMEN TAUGHTLY ACROSS THE ELECTRODES,
CENTERING IT OVER THE SENSOR OPENING. THE
SURFACE OF THE TEST SPECIMEN (BACK OR FRONT)
SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE
RESIDUAL CHARGE LEVEL ON THE SAMPLE AS SEEN BY
THE SENSOR, INCLUDING POLARITY. NOTE THAT TEST
SAMPLES WITH THE RESIDUAL CHARGE LEVELS OF LESS
+500 VOLTS YIELD THE BEST RESULTS. APPLY +5000
VOLTS TO THE ELECTRODES FOR A PERIOD OF 20 SECS.
AT THE END OF THE 20 SECOND PERIOD, THE HIGH
VOLTAGE (5000 VOLTS) SHALL BE TURNED OFF AND THE
SPECIMENS IMMEDIATELY GROUNDED. THE VOLTAGE
BEHAVIOR OF THE SPECIMEN WITH RESPECT TO TIME
SHALL BE PLOTTED ON THE RECORDER. NOTE: IN SOME
CASES, THE TEST EQUIPMENT WILL DISPLAY VOLTAGE
AND DECAY TIME INFORMATION AND A CHART RECORDER
IS NOT NECESSARY.'
PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE BEGIN
NING WITH 'IF THE SPECIMEN DID' IN ITS ENTIRETY.
PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS
ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:
'RECORD THE MAXIMUM VOLTAGE LEVEL (INCLUDING
POLARITY) AND DECAY TIME TO 10% OF THE MAXIMUM
VOLTAGE LEVEL ACHIEVED.'
PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING
PRIOR TO 1ST SENTENCE: 'REVERSE VOLTAGE POLARITY
REPEAT MEASUREMENT, AND RECORD RESULTS.'
PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS
ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: 'THE
AVERAGE TIME TO DECAY TO 10% OF THE MAX VOLTAGE
SHALL BE INCLUDED FOR EACH OF THE WARP & FILLING
DIRECTIONS, AS WELL AS THE OVERALL AVERAGE, FOR
EACH FABRIC TESTED. THESE WILL BE OBTAINED BY
AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF)
TOGETHER FOR BOTH VOLTAGE POLARITIES. UNLESS
OTHERWISE STATED IN THE REQUIREMENTS DOCUMENT,
THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF THE
AVERAGE MAXIMUM VOLTAGE IN BOTH THE WARP AND
FILLING DIRECTIONS IS LESS THAN 4000 VOLTS, AND
THE AVERAGE DECAY TIME (TO 10% MAX VOLTAGE) IS
GREATER THAN 0.5 SECONDS IN BOTH THE WARP AND
FILLING DIRECTIONS. IT SHALL BE INDICATED
WHETHER THE FABRIC IS ACCEPTABLE OR
NON-ACCEPTABLE.'
PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE
'406C' AND SUBSTITUTE WITH '406D'.
AFTER PARA. 7.1, ADD THE FOLLOWING: '
7.2 NOTE:
IF THE MODEL 406D STATIC DECAY METER, OR
EQUIVALENT, IS USED, A CHART RECORDER IS NOT
MANDATORY FOR THE TEST.'
ADDITIONAL INFORMATION FOR FED-STD-595C:
COPIES OF FED-STD-595 CAN BE OBTAINED FROM:
GENERAL SERVICES ADMINISTRATION - FEDERAL SUPPLY
SERVICE BUREAU
SPECIFICATION SECTION, SUITE 8100
470 EAST L'ENFANT PLAZA, SW
WASHINGTON, DC 20407
PHONE (202) 619-8925.
ADDITIONAL INFORMATION FOR FED-STD-191:
FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS
HEREBY INACTIVE FOR NEW DESIGN. WHEN NOT USING
FED-STD-191, SEE INTERIM CHANGES TO END ITEM
SPECIFICATION FOR REPLACEMENT ASTM.
INTERIM CHANGES TO FED-STD-191A:
TEST METHOD 5202, PARA. 5.3, DELETE FIRST
SENTENCE AND SUBSTITUTE: 'THE SPECIMEN SHALL BE
CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE
OUTER EDGE OF THE VISE, SUCH THAT ONE INCH OF
SPECIMEN LIES WITHIN THE CLAMP AND ONE INCH OF
THE SPECIMEN EXTENDS BEYOND THE CENTER OF
ROTATION (FACE OF THE VISE), AND WITH THE LONG
EDGE PARALLEL TO THE FACE OF THE DIAL PLATE'.
TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE
WEBBING. PAGE 1, PARA 4.1.2,LINE 4: DELETE
'B-97' AND SUBSTITUTE 'B-91'.
THE FOLLOWING METHODS ARE IDENTIFIED AS
SPECIFYING OZONE DEPLETING SUBSTANCES: 1100,
1200, 1240, 1400, 1410, 1500, 1510,1520,1530,
1540, AND 1550. PARA 5.1 OF THESE TEST METHODS
REQUIRE THE USE OF 1,1,1- TRICHLOROETHANE,
ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN
OZONE DEPLETING SUBSTANCE (METHYL CHLOROFORM)
AND IS THEREFORE PROHIBITED. THE USE OF EITHER
ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS
ARE IN BASIC OR ANY REFERENCED DOCUMENT.
METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL;
CANTILEVER BENDING METHOD. PAGE 2, PARA. 5.3
DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE
FOLLOWING: 'THE SPECIMEN SHALL BE CLAMPED
FIRMLY, WITH 1 END FLUSH WITH THE OUTER EDGE OF
THE VISE, SUCH THAT 1' OF THE SPECIMEN LIES
WITHIN THE CLAMP AND 1' OF THE SPECIMEN EXTENDS
BEYOND THE CENTER OF ROTATION (INNER FACE OF THE
VISE) AND WITH THE LONG EDGE PARALLEL TO THE
FACE OF THE DIAL PLATE.'
METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR
TEXTILE MATERIALS, PAGE 5, PARA. 5.2.2, LINE 8:
DELETE SENTENCE BEGINNING WITH 'THE SPECIMENS
AND BALLAST' IN ITS ENTIRETY AND SUBSTITUTE WITH
THE FOLLOWING: 'THE SPECIMENS AND BALLAST SHALL
BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN
A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF
140-180 DEG. F. THIS TEMPERATURE RANGE
CORRESPONDS TO A SETTING OF 'HIGH' ON THE
TEMPERATURE INDICATOR ON THE DRYER. DRYING
SHALL CONTINUE FOR 45-60 MINUTES OR UNTILSAMPLES
ARE DRY IN A ROTATING TUMBLE DRYER.'
PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE
BEGINNING WITH 'THE SPECIMENS AND BALLAST' IN
ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING:
'THE SPECIMENS AND BALLAST SHALL BE SEPARATED,
OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED
DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG.
F. THIS TEMPERATURE RANGE CORRESPONDS TO A
SETTING OF 'HIGH' ON THE TEMPERATURE INDICATOR
ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40
MINUTES OR UNTIL SAMPLES ARE DRY.'
METHOD 5931, ELECTROSTATIC DECAY OF FABRICS;
DETERMINATION OF PAGE 1, PARA. 3: AFTER NUMBER
OF DETERMINATIONS ADD 'PER SAMPLE UNIT'. PAGE
1, PARA. 4: DELETE 'APPARTUS' AND SUBSTITUTE
'APPARATUS'. PAGE 1, PARA. 5.1, LINE 3: AFTER
'AT' DELETE'APPROXIMATELY'.
PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER 'OF'
ADD '+-'. LINE 6: AFTER 'TO' ADD '+-'.
PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND
SUBSTITUTE WITH THE FOLLOWING:'5.3 MOUNT A
SPECIMEN TIGHTLY ACROSS THE ELECTRODES,
CENTERING IT OVER THE SENSOR OPENING. THE
SURFACE OF THE TEST SPECIMEN (BACK OR FRONT)
SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE
RESIDUAL CHARGE LEVEL ON THE SAMPLE AS SEEN BY
THE SENSOR, INCLUDING POLARITY.
NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE
LEVELS OF LESS +500 VOLTS YIELD THE BEST
RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR
A PERIOD OF 20 SECS. AT THE END OF THE 20
SECOND PERIOD, THE HIGH VOLTAGE (5000 VOLTS)
SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY
GROUNDED. THE VOLTAGE BEHAVIOR OF THE SPECIMEN
WITH RESPECT TO TIME SHALL BE PLOTTED ON THE
RECORDER. NOTE: IN SOME CASES, THE TEST
EQUIPMENT WILL DISPLAY VOLTAGE AND DECAY TIME
INFORMATION AND A CHART RECORDER IS NOT
NECESSARY.'
PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE
BEGINNING WITH 'IF THE SPECIMEN DID' IN ITS
ENTIRETY.
PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS
ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:
'RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING
POLARITY) AND DECAY TIME TO 10% OF THE MAXIMUM
VOLTAGE LEVEL ACHIEVED.'
PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING
PRIOR TO 1ST SENTENCE: 'REVERSE VOLTAGE POLARITY
REPEAT MEASUREMENT, ANDRECORD RESULTS.'
PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS
ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: 'THE
AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE
SHALL BE INCLUDED FOR EACH OF THE WARP & FILLING
DIRECTIONS, AS WELL AS THE OVERALL AVERAGE, FOR
EACHFABRIC TESTED. THESE WILL BE OBTAINED BY
AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF)
TOGETHER FOR BOTH VOLTAGEPOLARITIES. UNLESS
OTHERWISE STATED IN THE REQUIREMENTS DOCUMENT,
THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF
THEAVERAGE MAXIMUM VOLTAGE IN BOTH THE WARP AND
FILLING DIRECTIONS IS LESS THAN 4000 VOLTS, AND
THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS
GREATER THAN 0.5 SECONDS IN BOTH THE WARP AND
FILLING DIRECTIONS. IT SHALL BE INDICATED
WHETHER THE FABRIC ISACCEPTABLE OR
NON-ACCEPTABLE.'
PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE
406C AND SUBSTITUTE WITH '406D'.
AFTER PARA. 7.1, ADD THE FOLLOWING: '7.2 NOTE:
IF THE MODEL 406D STATIC DECAY METER, OR
EQUIVALENT, IS USED, A CHART RECORDER ISNOT
MANDATORY FOR THE TEST.'
DEPARTMENT OF DEFENSE INDEX OF SPECIFICATIONS
AND STANDARDS.
PART I AND II, JULY 2000 AND SUPPLEMENT, MARCH
2000
INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE
WITH FAR PART 52.246-2 STANDARD INSPECTION.
ADDITIONAL INFORMATION FOR MIL-STD-105E:
NOTE: MIL-STD-105 HAS BEEN CANCELLED AND
REPLACED
BY THE FOLLOWING: 'AMERICAN NATIONAL STANDARDS
INSTITUTE (ANSI) ANSI/ASQC Z1.4 - SAMPLING
PROCEDURES AND TABLES FOR INSPECTION BY
ATTRIBUTES'.
APPLICATION FOR COPIES SHOULD BE OBTAINED FROM:
AMERICAN SOCIETY FOR QUALITY CONTROL
611 EAST WISCONSIN AVE
MILWAUKEE, WI 53202
MIL-STD-129P, WITH CHANGE 4 - DEPARTMENT OF
DEFENSE STANDARD PRACTICE MILITARY MARKING FOR
SHIPMENT AND STORAGE - DATED
19 SEPTEMBER 2007
INTERIM CHANGES:
OMISSION OF MARKINGS ON EXTERIOR SHIPPING
CONTAINERS OF ITEMS
IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C
&T) DIRECTORATE:
THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN
THE NAME IDENTIFIES THE MATERIAL) SHALL BE
OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF
DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE
OF SHIPMENT.
IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE
MATERIAL AS BEING CLOTHING, IT MAY REMAIN.
NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS
OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED
INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH
SHIPMENT. THE WORDS 'PACKING LIST HERE' SHALL BE
STENCILED, NOT HAND LETTERED, ON THE CONTAINER.
MIL-STD-147 IS HEREBY REINSTATED AS FOLLOWS:
MIL-STD-147E DEPARTMENT OF DEFENSE
16 MAY 2008 STANDARD PRACTICE
PALLETIZED UNIT LOADS
STANDARDS (COMMERCIAL)
ASME-MH1 American Society of Mechanical
Engineers (ASME) Pallets, Slip Sheets, and Other
Bases For Unit Loads, for construction of
pallets.
ADDITIONAL INFORMATION FOR PPP-B-636:
FEDERAL SPECIFICATION PPP-B-636 DATED JULY 12,
1981, INCLUDING INTERIM FEDERAL SPECIFICATION
PPP-B-636L DATED JANUARY 1, 1991, IS HEREBY
CANCELLED, AND REPLACED WITH ASTM-D-5118,
STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD
SHIPPING BOXES, AND ASTM-D-1974, STANDARD
PRACTICE FOR METHOD OF CLOSING, SEALING AND
REINFORCING FIBERBOARD SHIPPING CONTAINERS.
ADDITIONAL INFORMATION FOR MIL-A-3316:
.
NO ADDITIONAL INFORMATION FOLLOWS.
.
ADDITIONAL INFORMATION FOR MIL-STD-2073-1:
NO ADDITIONAL INFORMATION FOLLOWS
STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS
IDENTIFIED AS ROLL #3746. FOLIAGE GREEN 504
IS TO BE USED AS SPECIFIED BY CONTRACT. THIS
APPLIES TO TYPE II, CLASS 1 ONLY.
CRITICAL APPLICATION ITEM
I/A/W STD NR FED-STD-191A(6) NOT 7
REFNO
AMEND NR A DTD 2006 OCT 03
TYPE NUMBER:
I/A/W STD NR FED-STD-595C(1)
REFNO
AMEND NR C DTD 2006 OCT 03
TYPE NUMBER:
I/A/W SPEC NR MIL-A-3316C(2)
REFNO
AMEND NR 2 DTD 2006 OCT 02
TYPE NUMBER:
I/A/W SPEC NR MIL-C-20079H
BASIC
AMEND NR H DTD 2006 OCT 03
TYPE NUMBER:
I/A/W STD NR MIL-STD-105E NOT 3
REFNO
AMEND NR E DTD 2006 OCT 03
TYPE NUMBER:
I/A/W STD NR MIL-STD-129P(4)
REFNO
AMEND NR P DTD 2006 OCT 03
TYPE NUMBER:
I/A/W STD NR MIL-STD-147E
REFNO
AMEND NR E DTD 2006 OCT 03
TYPE NUMBER:
I/A/W SPEC NR PPP-B-636J
REFNO
AMEND NR J DTD 2006 OCT 03
TYPE NUMBER: