Federal Bid

Last Updated on 28 Apr 2021 at 3 PM
Solicitation
Irvine California

Dissolution Vessel Washer

Solicitation ID 75F40121Q00047
Posted Date 28 Apr 2021 at 3 PM
Archive Date 20 May 2021 at 4 AM
NAICS Category
Product Service Code
Set Aside Total Small Business (SBA) Set-Aside (FAR 19.5)
Contracting Office Fda Office Of Acq Grant Svcs
Agency Department Of Health And Human Services
Location Irvine California United states 92612

The contractor shall provide a Dissolution Vessel Washer. The instrument shall meet or
exceed the following requirements:
• The instrument shall consist of a rinse tank and a waste tank contained in a
mobile unit with pumps and universal wash module.
• The universal wash module shall have a wash nozzle and drain assembly that
empties a dissolution vessel, then performs a complete 360° wash that provides a
thorough cleaning of the entire vessel in less than 60 seconds.
• The universal wash module shall have the ability to securely fit into any (U. S.
Pharmacopeia (USP) conforming 1 Liter vessel, regardless of the bath or vessel
manufacturer.
• The universal wash module shall have a self-adjusting drain that allows for vessel
height variations.
• The instrument shall have an integrated shaft rinse wand that provides a method
for cleaning the shaft and stirring elements on the dissolution apparatus.
• The instrument shall have the capability of cleaning at least 28 1 Liter vessels in
under 15 minutes.
• The rinse tank shall have a volume of at least 38 Liters.
• The rinse tank shall have electric level sensors for full/empty determination and a
sight gauge indicator.
• The rinse tank shall have a fill port equipped with quick disconnect fittings on the
top cover and automatic shut-off capability.
• The waste tank shall have a volume of at least 76 Liters.
• The waste tank shall have electric level sensors for full/empty determination and
a sight gauge indicator.
• The instrument shall have temperature control with an electronic immersion
heater with a temperature range from 25° to at least 60°C.
• The instrument shall have a continuous LED display of rinse tank temperature.
• The instrument shall have a RS-232 and a USB 2.0 interface port.
• The instrument shall be constructed with acid resistant heating elements.
• The instrument shall have electrical power of 115V ± 15V, 50/60 Hz, and 10A
preset at the factory.

• The instrument body must not exceed the following measurements: 26 inches in
width, 26 inches in depth and 39 inches in height.

Bid Protests Not Available

Similar Past Bids

Irvine California 21 Nov 2010 at 6 PM
Irvine California 08 Dec 2010 at 7 PM
New hampshire 28 May 2010 at 4 PM
Location Unknown 15 Jul 2016 at 2 PM
River Kentucky 18 Feb 2015 at 4 PM

Similar Opportunities

Irvine California 30 Dec 2030 at 8 PM
Irvine California 30 Dec 2030 at 8 PM
Irvine California 16 Jul 2025 at 6 PM
Irvine California 14 Aug 2025 at 3 PM