The United States Coast Guard Maintenance & Logistics Command, Atlantic intends to issue a Commercial Request for Quote (RFQ) for the drydock and repairs to the USCGC Nantucket (WPB-1316) a 110 FOOT PATROL BOAT. The Coast Guard intends to conduct this procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Subpart 13.5, Test Program for Certain Commercial Items. This procurement will be a Service-Disabled Veteran Owned Small Business Set-aside. All responsible SDVOSB businesses may submit an offer, which shall be considered by the U.S. Coast Guard. The SDVOSB size standard for NAICS 336611 is less than 1,000 employees. The solicitation will be issued electronically as a Best Value Request for Quote (RFQ) on the Federal Business Opportunities (FedBizOpps) web page at http://www.fbo.gov on or about July 14, 2009 with quotes due on or about August 14, 2009. Please sign up for the Auto Notification Service to receive an e-mail from FedBizOpps when an action is taken under this solicitation. This commercial item requirement is set-aside for all Service-Disabled Veteran Owned Small Business concerns and will be evaluated whereas Past Performance is significantly more important than Price. The USCGC Nantucket’s homeport is Saint Petersburg, FL. The vessel is geographically restricted to an area no greater than 470 nautical miles from their homeport in Saint Petersburg, FL. The place of performance will be at the contractor’s facility. The performance period is forty two (42) calendar days and is expected to begin on or about October 19, 2009. The contractor shall provide all labor, material and equipment necessary to dry dock and repair the USCGC Nantucket (WPB-1316). The scope of work is for the overhauling, renewing and repairing of various items aboard the USCGC Nantucket (WPB-1316). The scope of the acquisition will include, but is not limited to: 1. Routine Drydocking 2. Provide Temporary Logistics 3. Clean and Inspect Fuel Service Tanks 4. Clean and Inspect Fuel Stowage and Overflow Tanks 5. Clean and Inspect Oil and Oily Waste Tanks 6. Clean and Inspect Sewage Collection and Holding Tanks 7. Clean and Inspect Grey Water Collection and Holding Tanks 8. Clean Sewage Piping System 9. Clean Grey Water Piping System 10. Clean and Disinfect Potable Water Tanks 11. Preserve and Disinfect Potable Water Tanks - 100% 12. Preserve and Disinfect Potable Water Tanks - Partial 13. Preserve Sewage Collection and Holding Tanks - 100% 14. Preserve Grey Water Collection and Holding Tanks – 100% 15. Renew Floating Deck System in Galley and Mess Deck 16. Preserve Forward Void 17. Renew Main Diesel Engine (s) 18. Clean and Inspect Heat Exchangers 19. Inspect MDE Exhaust System 20. Overhaul Stabilizing Fins 21. Overhaul and Renew Sea Valves 22. Overhaul and Renew Firemain Valves 23. Remove, Inspect, and Reinstall Propellers 24. Remove, Inspect, and Reinstall Propeller Shafts 25. Overhaul Mechanical Shaft Seal Assemblies 26. Renew Water-Lubricated Propeller Shaft Bearings 27. Inspect and Maintain Cathodic Protection System 28. Remove, Inspect and Reinstall Rudder Assemblies 29. Overhaul Steering Gear Components 30. Renew Depth Indicating Transducer 31. Renew Speed Doppler 32. Preserve Underwater Body - "100%" 33. Renew Capastic Fairing 34. Preserve Stern Tubes 35. Preserve Bilge Surfaces In Various Locations 36. Prepare Weather Deck Surfaces 37. Renew Vaneaxial Fan and Motor Assemblies 38. Clean Engine Room Surfaces In Various Locations 39. Renew Pilothouse Window 40. Repair Damage Control Locker Deck 41. Install Gooseneck Vent 42. Perform Ultrasonic Thickness Measurements 43. Perform Air Test of Interior Compartments 44. Perform Aluminum Hull and Structural Repairs - 1/4" Plate 45. Perform Aluminum Hull and Structural Repairs - 5/16" Plate 46. Perform Hull and Structural Plating Repairs -Crack (Aluminum) FOOT 10 47. Perform Hull and Structural Plating Repairs - Eroded Weld (Aluminum) FOOT 10 48. Perform Hull and Structural Plating Repairs - Overlay Welding (Aluminum) INCH 6 49. Perform Hull and Structural Plating Repairs - Crack (Steel) FOOT 10 50. Perform Hull and Structural Plating Repairs - Eroded Welds (Steel) FOOT 10 51. Perform Hull and Structural Plating Repairs - Overlay Welding (Steel) INCH 6 52. Perform Hull and Structural Plating Repairs -Corrugated Plate (4.0-Pound) 53. Perform Steel Hull and Structural Plating Repairs (5-Pound) 54. Perform Steel Hull and Structural Plating Repairs (6.0-Pound or 5.63-Pound) 55. Perform Steel Hull and Structural Plating Repairs (7.5-Pound or 7.65-Pound) 56. Perform Steel Structural Member Repairs -Steel Studs 2 All welding and brazing shall be accomplished by trained welders, who have been certified by the applicable regulatory code performance qualification procedures. All reference documents are available for viewing at 300 East Main Street, Suite 600, Norfolk, VA 23510-9102. Drawings are now available on CD-ROM. The CD-ROM is available free of charge to contractors upon request no later than four (4) days from the solicitation issuance. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). For information concerning this acquisition, contact Ms. Susan Kreider at (757) 628-4644 or by e-mail at [email protected].

Bid Protests Not Available