1. Embroidery Machine - Melco EMT16X or approved equal Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation. Minimum specifications: Equipment Package: (1) Melco EMT16X Embroidery Machine\ including 6-year limited warranty/tech support-4 head (part no. 34400-05) (4) Machine Cart Assembly (part no. 34383), (4) Machine Support Table (part no. 34416 ), (4) AC Power Cord (part no. 291644-02), (4) Ethernet Network Cable (part no. 010688-01), (4) Madeira Starter Kit (part no. 33341-01), Hoops: (8) 12cm Round Hoops 4.72in (part no. 10217-01), (8) 15cm Round Hoops 5.90in (part no. 10216-01), (8) 30x36 cm Hoop - Rectangular Plastic 11.75" x 14.25" (part no. 010942-02), (4) Wide-Angle Cap Option (1-Driver & 2-Cap Frames) 270-Degree (part no. 34259), (4) Mighty Hoop(TM) 5.5" x 5.5" (part no. 34843M), (1) Bobbin Tension Gauge TM-1-ML (part no. 34746), (1) USB to Ethernet Adapter (part no. 35372), Training Option: (1) Self paced online training (part no. 17377-SPOT) Requirements of the offered machine include: - Each head can sew independently of the others when needed - All four heads can sew the same design simultaneously when needed - Can be easily rearranged and moved due to limited space at the agency; each head can be placed in the room independently of each other, allowing for more efficient utilization of the limited space available in the agency's embroidery department. - Can sew consistently at 1,200 to 1,500 spm (stitches per minute) - Has a small footprint and does not take up an extensive amount of room 2. Digitizing Software Software upgrade: (2) DesignShop V11- professional version, (1) MOS V11 FLEX+--USB delivery (part no. 35502USB) Installation: Install 1-day (part no. 17326) or approved equal. Software offered must be compatible with machine offered. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Bid Protests Not Available