This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation, N40192-12-Q-7098, is being issued as a Request for Quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-59. This procurement is a 100% Small Business set-aside IAW FAR 19.502-2. The NAICS code is 333999 and the small business size standard is 500 employees.
The following commercial items are requested in this solicitation:
CLIN 0001 - (QTY 1) 545 piece tool set with rolling storage. Tool set includes (15) Chisel and punches, (2) Clamps, (2) electrical crimping pliers, (3) files, (4) Hammers, (160) Hand sockets (varied sizes of metric and standard), (110) impact sockets (varied sizes of metric and standard), (9) Impact drive tools, (3) knives, (24) miscellaneous tools, (67) Pliers, (40)Ratchets, Drive Tools, and Accessories, (1) Saw and (4) saw blades, (6) scrapers, (38) Screwdrivers, (regular and Philips varied in size), (3) Snips, (2) Torque Wrenches, and (75) Wrenches (varied in size of standard and metric). The tool set includes tool storage cabinets for all tools, to include foam placement and laser engraving on each tool. The engravings need to read "SCOTR", and does not matter where the engraving is placed on the tools. See attachment for tool sizes similar or equal to Snap On Tools.
CLIN 0002 - (QTY 1) Electrician Tool Kit. The tool kit includes:
18inches heavy duty multi-pocket bag, heavy-duty 8 pocket leather pouch, 2inches leather tool belt.
9inches side cutting pliers, 8inches diagonal cutting pliers, 8inches long nose pliers, 10inches pump pliers, wire stripper 10-18 AWG, NM cable ripper, stripping and crimping combination tool, cable cutter,
1/4inches x 4inches flat blade screwdriver, cabinet tip round shank, 3/16inches x 6inches flat blade screwdriver, cabinet tip round shank, 1/4inches x 6inches flat blade screwdriver, Phillips tip #1, 3/16inches x 3inches screwdriver, Phillips Tip #2, 1/4inches x 4inches screwdriver, screw-holding screwdriver 3/16inches x 6inches, Utility knife; 12inches Hacksaws, keystone tip square shank; 3inches scratch awl; 10inches adjustable wrench; 9 piece folding Hex Key Set; 25feet Tape Measurer; Torpedo Levels; 18oz Electrician Hammer; High Dexterity Gloves and GT-11 Voltage Tester.

CLIN 0003 (QTY 1) Technician Tool Kit. The tool kit includes:
KT 8 Professional round cable cutter (Max: 6AWG), Cat5e, Cat6, phone cutter/stripper; LC CST coax stripper 2-level (RG59/6/6 Quad: .157); compression crimper - RCA, BNC, cable TV F (RG59/6/6 Quad); all-in-one data and phone tool; PDT Handle only; 110 blade, 66 blade, BIX blade, Krone LSA blade, Double 110 Blade; PDT Detachable Light; LAN navigator tester, Tone and Probe, Can Wrench, RJ45 Modular Adapter, Untwist Tool; Flaring tool for CATV; (10) RJ11 WE/SS 6P6C Modular plugs, (10) RJ45 plugs (Cat5e, Cat5); RG6 Compression Cable TV "F" connectors; CAV-F (Female) to BNC (Male) Adapter - 1 piece; and Tool Bag (empty).

Quotes should include material description, catalog cuts or other photos for technical acceptance.
Quotes should include proposed delivery schedule to Tracy Depot Consolidation Center, Tracy California 95304.
The following provisions and clauses apply to this acquisition: The provision at FAR 52.212-1, Instructions to Offerors--Commercial Items. Quotes will be evaluated and awarded to the offeror with the lowest price technically acceptable. The provision at FAR 52.212-3, Offeror Representations and Certifications -- Commercial Items. The clause at FAR 52.212-4, Contract Terms and Conditions-Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders--Commercial Items (Deviation). Specifically, the following clauses cited are applicable to this solicitation: FAR 52.219-6, Notice of Small Business Set-Aside; FAR 52.222-26, Equal Opportunity; FAR 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans; FAR 52.222-36, Affirmative Action for Workers with Disabilities; FAR 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans; The clause at DFARS 252.204-7004, Required Central Contractor Registration; DFARS 252.211-7003 Item Identification and Valuation; DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statues or Executive Orders applicable to Defense acquisitions of commercial items (Deviation); DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. DFARS 252.225-7001, Buy American Act and Balance of Payment Program. The Government reserves the right to award on an all or none basis. All firms must be registered in the System for Award Management (SAM) @ www.sam.gov and shall be considered for award.
Sent quotes to Teresita Q. Untalan at e-mail [email protected]. Oral Quotes will not be accepted. Responses to this RFQ must be received via e-mail, by Monday, 24 September 2012, 5:00pm Eastern Time.

Bid Protests Not Available