Model PCH Piano Hinge Conveyor
Overall Width 1 ft., 0 3/8 in.; Low FPM 3 FPM, High FPM 30 FPM
Estimated Conveyor Weight 822 lbs
Infeed Elevation 1 ft.; Discharge Elevation 5 ft., 11 1/4 in. Horizontal Tail Length, 3 ft. Lower Incline Joint Angle 45 Degree, Intermediate Section Length 6 ft., Upper Incline Joint Angle 45 Degree, Length of Drive Section 3 ft.
Drive Assemblies Overhead Drive (Left Side) Motors ... 1 HP- 230/3/60 Premium Energy Efficient Inverter Duty Motor # 032.353 With VSC-12-11 115 Volt 1 PH V/S Controller
Note: Maximum Speed Ratio Is 10:1 Reducer 4A Reducer Belts 8 Inches Wide Piano Hinge Belt 2.5" P.D. Plain Bottom
Floor Supports PCHS-Low Elevation Infeed Support-12 Floor Supports PCHS-08-12 with Knee Braces
Floor Supports PCHS-10-12 with Knee Braces Finish All Normally Painted Parts To Be Painted Hytrol Green Including Guards
SEE DIAGRAM ENCLOSED FOR PICTORAL REPRESENTATION.
BRAND SOURCE SPECIFIC; HYTOL PCH UNIT(S); SEE ATTACHED LIMITED SOURCE JUSTIFICATION.
Bid Protests Not Available