Point Of Contact Not Available

The City of Palm Coast WWTP #1 is looking to purchase a new Turbidity and TSS meter that will fit our needs. 1) The quote should be for the equipment and include the installation. 2) The unit will be located in the outdoor environment and should all be waterproof/sun resistant. 3) The equipment needs to be Continuous Reading Online Meters. 4) It can be one probe that reads both parameters or two individual probes, one for each parameter. 5) It can be an over-the-rail system or in-pipe, but if a pump is needed it must be included in the quote. 6) Other styles may be considered as long as all we need is included in the quote. 7) The meter (controller) should be able to handle both the TSS and Turbidity probes. 8) If more than one controller (meter) is needed, it needs to be detailed in the quote. 9) Installation, training, and mandatory site visit. ///// Specifications: // Meter should be approved by the EPA for use in the measurement of Turbidity and TSS in Wastewater. // Waterproof enclosure. // Controller with multiple outputs. // 4 to 20 mA // power supply 100-240 VAC // USB or SD card connection // Local display with local controls. Please specify it has buttons or touch screen. Turbidity probe that is compatible with the controlling meter. Cable larger than 22’. TSS probe that matches the controlling meter. Cable larger than 22’. Rail mounting equipment for each probe. Range of 0 to 25 NTU on both the TSS and Turbidity Calibration Capability: Factory calibrated; user calibration available TSS Range Concentration of at least: 0 to 40.0 mg/L FNU, NTU, TEF Concentration of at least: 0 to 40.00 FNU, NTU, TEF Resolution Auto-Ranging 0.001 to 1 Temperature Operating 32 to 140 °F (0 to 60 °C) Installation: Must be included in the quote. Training and documentation. Warranty: 2 years

Bid Protests Not Available