This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 0011180256-0001 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-98. The associated North American Industrial Classification System (NAICS) code for this procurement is 811219 with a small business size standard of $20.50M. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2018-06-15 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Gordon, GA 30905

The MICC Fort Gordon requires the following items, Brand Name or Equal, to the following:
LI 001: CALIBRATION SERVICE FOR EQUIPMENT TS RADIO MANUFACTURER: AEROFLEX MODEL: 3920, 5, EA;
LI 002: CALIBRATION SERVICE FOR EQUIPMENT MODULE OTDR MANUFACTURER: JDSU MODEL: 5021NV, 3, EA;
LI 003: CALIBRATION SERVICE FOR EQUIPMENT MODULE OTDR MANUFACTURER: JDSU MODEL: 5022NV, 3, EA;
LI 004: CALIBRATION SERVICE FOR EQUIPMENT MODULE OTDR MANUFACTURER: JDSU MODEL: 5023MM, 1, EA;
LI 005: CALIBRATION SERVICE FOR EQUIPMENT MODULE OTDR MANUFACTURER: JDSU MODEL: 5026DR, 1, EA;
LI 006: CALIBRATION SERVICE FOR EQUIPMENT ANALYZER, NETWORK MANUFACTURER: AGILENT MODEL: 8757D, 2, EA;
LI 007: CALIBRATION SERVICE FOR EQUIPMENT ANALYZR, SPEC MANUFACTURER: HEWLITT-PACKARD MODEL:8757E, 1, EA;
LI 008: CALIBRATION SERVICE FOR EQUIPMENT ANALYZR NTWK MANUFACTURER: AGILENT MODEL: 8757E-C02, 1, EA;
LI 009: CALIBRATION SERVICE FOR EQUIPMENT GEN AUD MANUFACTURER: TEKTRONIX MODEL: AG7, 5, EA;
LI 010: CALIBRATION SERVICE FOR EQUIPMENT MODULE ELEC MANUFACTURER: TEKTRONIX MODEL: AGL7, 5, EA;
LI 011: CALIBRATION SERVICE FOR EQUIPMENT MODULE ELEC MANUFACTURER: TEKTRONIX MODEL: AVG7, 5, EA;
LI 012: CALIBRATION SERVICE FOR EQUIPMENT MODULE OTDR MANUFACTURER: JDSU MODEL: C4000-LAN, 2, EA;
LI 013: CALIBRATION SERVICE FOR EQUIPMENT TSTR VOLT MANUFACTURER: FLUKE MODEL: C9970, 8, EA;
LI 014: CALIBRATION SERVICE FOR EQUIPMENT TST CELL MANUFACTURER: ALBER MODEL: CRT-400, 1, EA;
LI 015: CALIBRATION SERVICE FOR EQUIPMENT ANALYZR CABL MANUFACTURER: FLUKE MODEL: DSX-5000, 4, EA;
LI 016: CALIBRATION SERVICE FOR EQUIPMENT MODULE OTDR MANUFACTURER: FLUKE MODEL: DTX-SFM2, 5, EA;
LI 017: CALIBRATION SERVICE FOR EQUIPMENT GEN AUD MANUFACTURER: TEKTRONIX MODEL: DVG7, 5, EA;
LI 018: CALIBRATION SERVICE FOR EQUIPMENT GEN SIG MANUFACTURER: HEWLETT-PACKARD MODEL: E8257D520-07, 1, EA;
LI 019: CALIBRATION SERVICE FOR EQUIPMENT TS OPTICAL MANUFACTURER: JDSU MODEL: FIT-S105-PRO, 2, EA;
LI 020: CALIBRATION SERVICE FOR EQUIPMENT TS FO MANUFACTURER: EXFO MODEL: FOT-930, 1, EA;
LI 021: CALIBRATION SERVICE FOR EQUIPMENT ANALYZR COMM MANUFACTURER: ACTERNA MODEL: FST2310, 1, EA;
LI 022: CALIBRATION SERVICE FOR EQUIPMENT ANALYZER, COMM MANUFACTURER: JDSU MODEL: HST3000, 26, EA;
LI 023: CALIBRATION SERVICE FOR EQUIPMENT ANALYZER, COMM MANUFACTURER: JDSU MODEL: HST3000C, 3, EA;
LI 024: CALIBRATION SERVICE FOR EQUIPMENT FIXTURE TEST MANUFACTURER: ANRITSU MODEL: ICN50B, 2, EA;
LI 025: CALIBRATION SERVICE FOR EQUIPMENT ANALYZR SPEC MANUFACTURER: ANRITSU MODEL: MS2725C, 1, EA;
LI 026: CALIBRATION SERVICE FOR EQUIPMENT OTDR MANUFACTURER: WAVETEK MODEL: MTS5200NV, 3, EA;
LI 027: CALIBRATION SERVICE FOR EQUIPMENT MODULE OTDR MANUFACTURER: J-F MODEL: OFTM-5732, 1, EA;
LI 028: CALIBRATION SERVICE FOR EQUIPMENT SOURCE FO MANUFACTURER: NOYES FIBER MODEL:OLS-2, 1, EA;
LI 029: CALIBRATION SERVICE FOR EQUIPMENT SOURCE FO MANUFACTURER: NOYES FIBER MODEL: OLS4, 2, EA;
LI 030: CALIBRATION SERVICE FOR EQUIPMENT ANALYZR SPEC MANUFACTURER: ANRITSU MODEL:S412E, 1, EA;
LI 031: CALIBRATION SERVICE FOR EQUIPMENT ANALYZR COMM MANUFACTURER: ACTERNA MODEL:TBERD310, 1, EA;
LI 032: CALIBRATION SERVICE FOR EQUIPMENT ANALYZR, COMM MANUFACTURER: JDSU MODEL:TBERD4000, 5, EA;
LI 033: CALIBRATION SERVICE FOR EQUIPMENT ANALYZR COMM MANUFACTURER: ACTERNA MODEL:TBERD5800, 6, EA;
LI 034: CALIBRATION SERVICE FOR EQUIPMENT ANALYZR COMM MANUFACTURER: ACTERNA MODEL:TBERD6000A, 11, EA;
LI 035: CALIBRATION SERVICE FOR EQUIPMENT ANALYZR, COMM MANUFACTURER: JDSU MODEL:TBERD8000, 23, EA;
LI 036: CALIBRATION SERVICE FOR EQUIPMENT GEN T-M MANUFACTURER: TEKTRONIX MODEL:TG8000, 5, EA;
LI 037: CALIBRATION SERVICE FOR EQUIPMENT SENSOR POWR MANUFACTURER: AGILENT MODEL:U2000B, 2, EA;
LI 038: REPAIR IF ANY SUBMITTED EQUIPMENT IS FOUND TO BE IN NEED OF REPAIR, THE VENDOR WILL NOTIFY THE CONTRACTING OFFICER FOR AUTHORIZATION OF REPAIR PRIOR TO ANY REPAIRS BEING MADE Please use value of $5,000 for pricing purposes; this line may be used or not depending on if repairs are needed., 1, JOB;
LI 039: RETURN SHIPPING RETURN SHIPPING FOR CALIBRATION SERVICES PER CUSTOMER EQUIPMENT LIST, 1, EA;
LI 040: CONTRACTOR MANAGEMENT REPORTING (CMR), 1, EA;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, MICC Fort Gordon intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Gordon is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at [email protected]. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or [email protected] of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.
"Wherever the words ""offer"", ""proposal"", ""offerors"", or similar terms are used in this solicitation, they shall be read to mean ""quote"", ""quotation"", ""quoter"", ""vendor"" or similar corresponding term to reflect that this solicitation is a request for Quotations, not a Request for Proposals or an Invitation for Bids."

The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition.

The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far.

The following DFARS clauses are applicable under DFAS 252.212-7001: 252.225-7001, Buy American Act and Balance of Payments Program; 252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2005); 252.246-70000 Material Inspection and receiving Report and Army Electronic Invoicing Instructions; 252.204-7012 Safeguarding of Unclassified Controlled Technical Information

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

Sellers must present their representations and certifications, upon request, through the Online Representations and Certifications Application (ORCA) at http:orca.bpn.gov.

New equipment ONLY, NO remanufactured or used products. No "GREY" market items.

Bid MUST be good till 30 September 2018

FOB Destination CONUS (CONtinental U.S.)

No partial shipments unless otherwise specified at time of order

In accordance with DFARS 252.232-7003, “Electronic Submission of Payment Requests and Receiving Reports”, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under “about WAWF”. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or [email protected]

NAICS Code 811219 must be present in vendor SAM account prior to contract award

Notice to Prospective suppliers on Use of Past Performance Information Retrieval System.

Bid Protests Not Available