Description of Required Items:

Provide two-sided Twin XL mattress with:

Quantity:    270

Width: 36" to 38"

Length: 78" to 80"

Thickness: 8" to 9"

364 double heat-tempered steel Bonnell  innerspring coils (min 280 coil count) each coil with minimum one turn per inch - Min gauge 13.00

Edge support with 6-gauge minimum border wire secured to the outer row of perimeter coils by helicals to protect the edges from premature breakdown  Wire border must be butt-welded at ends (support seating usage)  

All sides shall be completely enclosed with adequate padding so no sharp edges or coils can be felt through sides 

Smooth

dark- colored outer-cover of breathable, soft, and comfortable polyurethane-coated nylon fabric or similar Polybrominated Diphenyl Ether (PDBE) and  Polyvinyl Chloride (PVC) material

Tape edge seams to resist raveling and zippering if stitches are broken or cut  -Mattress shall have a bonded, flame resistant and insulation pad or fire retardant fiber (laminated to the outer cover) on top and bottom as a fire barrier

Beneath the fire barrier, a minimum of 2.0 in thick High Resilience (HR) polyurethane high density foam (one piece) with an unfilled density of at least 1.5 pounds per cubic foot and minimum Indentation Load Deflection (ILD) of 30 on both sides of mattress

Product must be fluid proof, hypoallergenic, bug resistant, antimicrobial, antistatic, crack resistant, and flame retardant 

-Meet CPSC 16 CFR 1632 and 16 CFR 1633 

-WARRANTY: Minimum of 10 year warranty (years 1-5 non-prorated and years 6-10 prorated) to cover manufacturer defects during normal wear and usage.

Coverage shall include any damage to bedding material/cover, under normal wear and proper handling that result in the material/cover to split, crack, or collapse.

Mattresses will not shipped in a compressed state.