MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT
CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SOURCE CONTROLLED DRAWING APPLIES
OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR
PRODUCT FOR THE PURPOSE OF FUTURE ACQUISITIONS MUST
CONTACT THE COGNIZANT DESIGN ACTIVITY SPECIFIED IN
FAR CLAUSE 52.209-1.

AWARD OF THIS SOLICITATION WILL NOT BE HELD UP
PENDING QUALIFICATION AND APPROVAL OF ANY PRODUCT.
IF OFFERORS PRODUCT HAS BEEN RECENTLY APPROVED
BUT NOT ADDED TO THE LIST OF APPROVED SOURCES CITED
ON THE SOURCE CONTROLLED DRAWING, A COPY OF THE
COGNIZANT DESIGN ACTIVITY#S LETTER OF APPROVAL MUST
BE SUBMITTED WITH THE OFFER.

IF THE APPLICABLE (OEM OR MILITARY) DRAWING,
SPECIFICATION, STANDARD, OR QUALITY ASSURANCE
PROVISION (QAP) SPECIFIES AN ACCEPTABLE QUALITY
LEVEL (AQL), THE SAMPLING ACCEPTANCE NUMBER
SHALL BE REDUCED TO ZERO (0). FOR EXAMPLE, IF
THE ACCEPT REJECT CRITERIA IS ACCEPT ON (3)
DEFECTS AND REJECT ON (4) DEFECTS, THE NEW
ACCEPT REJECT CRITERIA IS ACCEPT ON (0) DEFECTS
AND REJECT THE ENTIRE LOT ON (1) DEFECT. EVEN
THOUGH THE ACCEPTANCE LEVEL IS ELIMINATED, THE
SAMPLE SIZE REMAINS THE SAME.

DRAWING INDICATES ITEM IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<
---------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED AND
OPENED AT AN APPROVED ESD WORKSTATION -OR- FIELD
SERVICE KIT. FOR FURTHER INFORMATION, CONSULT
MIL-HDBK-773.

CRYSTAL BARE ITEM MARKINGS MAY BE EITHER IN
ACCORDANCE WITH MIL-C-3098G, AS AMENDED, OR IN
ACCORDANCE WITH THE INDIVIDUAL SPECIFICATION
SHEET.

PRESERVATION AND PACKAGING SHALL BE IAW THE
LATEST REVISION OF MILITARY SPECIFICATION:
MIL-E-17555, FOR ELECTRONIC EQUIPMENT.

WHEN ZZ IS THE METHOD OF PRESERVATION, USE LEVEL
"A" PRESERVATION AS CITED IN THE COMMODITY
SPECIFICATION.

SOURCE CONTROL DRAWING

This item requires DOD QUALIFIED Electro-static Discharge (ESD) protective packaging materials in accordance with MIL-PRF-81705. The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705. For additional ESD packaging information, refer to the following DLA packaging website: http://www.landandmaritime. dla.mil/Offices/Packaging/default.asp

GREENRAY INDUSTRIES, INC. 16681 P/N NH-529
INFICON EDC INC. DBA 18853 P/N EROS-750-EC-79

IAW BASIC DRAWING NR 00724 73-00045
REVISION NR R DTD 01/14/1992
PART PIECE NUMBER: 73-00045-001

SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

Markings Paragraph
When ASTM D3951, Commercial Packaging is specified, the following apply:
•,,All containers shall meet ASTM D4169, Standard Practice for
Performance Testing of Shipping Containers and Systems.
•,,All Section D Packaging Clauses take precedence over ASTM D3951.
•,,In addition to requirements in MIL-STD-129P, all Labeling and Marking
shall have a Method of Preservation of Commercial Pack applied to the MIL-STD-129 identification labels on all shipping
containers, including the unit and intermediate levels. The Method of
Preservation (M) of Commercial Pack (CP) shall be applied to all labels
and marking as "MCP."
•,,For all shipments of packaged materiel to the Government, which
includes either Depot (DLA-Direct) or DVD (Customer-Direct) shipments,
both DoD linear and two-dimensional (2D) bar code markings are required
in accordance with MIL-STD-129. See DLAD 52.211-9010 for exceptions to
the Military Shipment Label (MSL) requirement. When the MSL is
required, the Transportation Control Number (TCN) is not an exception
and must always be present. TCN construction is detailed in DTR
4500.9-R (Appendix L).
•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified
in the contract take precedence over ASTM D3951.
•,,Loose-fill cushioning and dunnage materials are prohibited in all
shipments to DOD customers.
•,,Unitization in accordance with MIL-STD-147, Palletized Unit Loads, is
required for all shipments to the DOD activities.