Title:

W519TC24PLASMATABLE0001

PLASMA TABLE – MWMSS – W519TC24PLASMATABLE

NAICS Code: 333992

PSC: 3433

Description(s):

The purpose of this Sources Sought / Market Research is to identify potential sources capable of providing a Computer Numerically Controlled (CNC) Plasma Table to support the Metalworking and Machining Shop Set

(MWMSS).

The Plasma Table Kit consists of the following items:

1 each Brand Name – FastCut CNC Scout 4’ x 4’ Plasma Table

1 each Brand Name –Hypertherm Machine Torch, Model #059719 (IAW Drawing 11B5190937)

1 each Brand Name (Or Equal) – Pelican Cutter Accessory Case (IAW Drawing 11B5190799)

1 each Plasma Table Trunk (IAW Drawing 11B5190177)

The requirements are as follows:

Nominal Table size: 4’x4’

Minimum Table Capacity: 5/8” steel (400 pounds)

Minimum Travel Speed: 500 ipm

Minimum cut speed: 400 ipm

Maximum Slat Spacing: 3”

Maximum Power Requirement: 120VAC, 15 amps

Computer Connection: Ethernet

Maximum Setup Time: 5 hours from fully disassembled in storage containers

Shall include an automatic torch height control.

Shall include a magnetic break away torch holder.

Shall be compatible with the Hypertherm Powermax 65 with CPC port.

Shall be compatible with the Hypertherm 15 degree hand torch (PN: 059471), 75 degree hand torch (PN: 059474), or machine torch (PN: 059477).

Shall be able to be disassembled and packaged without cutting or welding in the two containers specified by drawings 11B5190177 and 11B5190799 with protective packaging materials for shipment.

Table shall be operated using g-code.

Software Requirements:

Table shall include software capable of building g-code from .dxf files.

Table shall include any software that is necessary to operate CNC table.

Software shall not require internet access to operate.

Software requirements shall not exceed:

Windows 7

Processor: Multicore, 2.26 GHz with 3 MB of L2 Cache

RAM: 4GB

Video Card: 256 MB, 128-bit interface, DirectX 10.1 support