This Sources Sought notice is for informational and planning purposes only. It does not constitute a Solicitation and is not to be considered as a commitment by the Government. All firms responding to this sources sought notice are advised that their response to this notice is not a request that will be considered for contract award. The information from this market research is for planning purposes only and will assist the Government in planning its acquisition strategy. This is strictly market research and the Government will not entertain questions concerning this market research.

The intent of this notice is to determine the availability of qualified commercial sources technically capable of providing the below:

800-EMVP- 04  Model EMV+ Portable Ventilator, 731 Series, Military     quantity 1 each

Unit Consisting of:

1ea- AC Power Supply with Line Cord

 1ea- Assembly Oxygen Hose 6"

1ea- Circuit, Vent, Single Limb, Adult/Pedi

1ea- Circuit, Vent, Single Limb, Infant

1ea - Case, an, Padded, Vent and Accessories

1ea- Cable Assembly 3ft, Masimo SE Oximeter

1ea- Cable Assembly 4ft, Masimo LNCS

2ea - Filter, Foam, Inlet, 1.08" dia. X 1/2" Long

2ea- Filter, Disc, Fresh Gas/Emerg. Air Intake

1ea - Cable, DC, External Power, 12V

1 ea - CD, Manual, EMV  

1 ea- Quick eference Guide, Laminated

1 ea - Manual, Operation, 31 Military

Specifications

Clinical Specifications

Operating Modes: AC, SIMV, CPAP, BL

Breath Target: Volume and pressure

Special Functions: Plateau Pressure, Manual Breath, Apnea Backup, Oxygen in Use, Inverse Ratio

Flow Rate: 0 to 100 LPM @ 40 cm H2O

Breath Rate: 1 to 80 BPM

Tidal Volume: 50 to 2000 ml ATPD ± 10% of setting

Inspiratory Time: 0.3 to 5.0 seconds

I:E Ratio: 1:99 to 4.0:1.0

FiO2: 21 to 100% ± 3% of full scale ± 10% of setting

PEEP: 0 to 30 cm H2O

Pressure Support: 0 to 60 cm H2O

 Peak Inspiratory Pressure (PIP): 10 to 80 cm H2O

Trigger Sensitivity: -0.5 to -6.0 cm H2O

Oxygen Input Pressure: 55 psig (-25%; + 20%) (380 kPa)

Safety Specifications

Airway Pressure High Limit: 20 to 100 cm H2O values

Airway Pressure Low Limit: Off, 3 to 35 cm H2O

BPM High Alarm Limit: Off, 2 to 99

BPM Low Alarm Limit: 2 to 40

LED Status/Alarm Indicator: Red, yellow, and green LCD/LED adjustable

Environmental

Operating Voltages: 100 to 240 VAC (50/60 Hz) or 12.5 to 28.0 VDC

Operating Time: Internal battery 10 hours

Temperature Ranges: Operating: -25° to 49°C (-13° to 120°F) with battery charging, battery discharge and AC power operation

          Battery Charging: 0° to 45°C (32° to 113°F)

Long-Term Storage: -15° to 21°C (5° to 71°F) Optimal storage conditions

Altitude Compensation: Automatic -2,000 to 25,000 ft. (-601 to 7,620 meters)

AWR Certified: Approved for most U.S. Military aircraft

Temperature and Humidity Testing: MIL STD 810F

Ingress Testing: MIL STD 810 F

Shock and Vibration Testing: MIL STD 810F

Altitude Testing: MIL STD 810F

EMC Testing: MIL STD 461F

Military Vehicle Power: MIL STD 1275 F

General

Size: 8.0” wide x 12.5” high x 4.5” deep (20.3 cm wide x 31.8 cm high x 1.4 cm deep)

Weight: 9.7 lbs (4.4 kg)

Potential offerors having the skills, experience, professional qualifications, and capabilities necessary to perform the described requirement are invited to provide a capabilities statement via e-mail. The Capability statements shall not exceed ten (10) pages and must include the following: 1) Company name and Point of Contact information (address, telephone, e-mail, web-site, etc.); 2) DUNS number and CAGE code; 3) Small Business Size/Certification (to include 8(a), HUBZone, SDVOSB, etc.); and 4) Familiarity and knowledge of the requirement. Also include where this product is manufactured.

Responses are due no later than 02:00 am EST, Friday, August 06, 2021, and shall be electronically submitted to [email protected]. All responses will be used to determine the appropriate acquisition strategy for a potential future acquisition. Response is strictly voluntary; no reimbursement will be made for any costs associated with providing information in response to this synopsis or any follow-up information requests.

Contracting Office Address:

360 Broad Street, Hartford CT 06105

Point Of Contact:   [email protected]