The Concrete Shelter proposed will be standard construction featuring solid concrete design with 4" walls and steel rebar reinforced high strength concrete. The standard exterior finish is exposed aggregate, GREYSTONE GRAY.

Concrete Shelter has been designed to be, Bulletproof to 30.06 Rifle from 15 feet per UL-752, provide 2-Hour Fire Rating per UBC, and be Virtually Waterproof and Maintenance Free.

The Shelter you requested will be equipped as follows:

1. 11’8” WOD x 16’ LOD x 11’1” HOD Concrete Shelter
   10’7” WID x 14’11” LOD x 9’9” HID
   **** Manufactured in a NPCA Certified Factory ****
   Estimated Weight:  50,000 lbs.
   Exterior Finish – Exposed Aggregate Greystone Gray
   Four (4) Cast-in Lift Shackles
   Internal (Non-Exposed) Structural Seals
   1/4” per Foot Roof Slope in All Four Directions with Rubber Membrane Secondary Roof Seal and 2” Roof Overhang on all Four Sides
   150 PSF Floor Load Uniformly Distributed
   60 PSF Roof Load Uniformly Distributed
   150 MPH Wind Load
   Seismic Rated – Category D
2. Interior Finish
   3/4” Thick White HDPE Coated Plywood Paneling Walls and Ceiling
   Commercial Grade Vinyl Tiled Concrete Floor with Rubber Cove Molding
3. Insulation
   R-11 Floor and Walls
   R-19 Ceiling
4. Doors and Accessories
   One (1) 3’ x 7’ Exterior 18 Gauge Galvanized and Painted Steel Door with Cast-in 16 Gauge Galvanized and Painted Steel Door Frame
   with,
   NRP Non-Corrosive Hinges
   Lever Mortise Lockset with Deadbolt and Removable Core
   Aluminum Threshold and Door Sweep
   Weather-stripping
   Hydraulic Door Closer with Hold Open Feature
   Aluminum Drip Shield
5. Electrical System
   A)      20 Circuit AC Load Center
             120/240 VAC Single Phase
             60 Hz Operation
             100 Amp Main Breaker
   B)      Four (4) Dual Strip LED Interior Light Fixtures with Switch and Lenses
   C)      Two (2) Duplex Convenience Receptacles – Wall Mounted
   D)      Required Surface Mounted EMT Conduit, Connectors, Clamps, Breakers,
             and Wire
6. Cooling / Heating
   One (1) Mitsubishi Model #PKA-A36KA6, 34,200 BTU Cooling, 37,000 BTU Heating Mini-split Heat Pump System Comprised of One (1) Indoor Wall Mounted Air Handler and One (1) Model #PUZ-A36NHA6 Slim Outdoor Unit with Thermostat Controls
7. Wall Penetrations
   To be Cored on Site by Others