Sources sought synopsis announcements are issued to assist the 3rd Contracting Squadron, Elmendorf AFB, Alaska, in performing market research to determine interest and an estimate of cost. This is not a request for proposal (RFP) and responses to this request are not proposals and cannot be accepted by the Government to form a binding contract. This is not a guarantee of a future RFP or an award. This document should not be construed as a commitment of any kind by the Government. Any information provided to the Government in response to this document will become 3rd Contracting Squadron property and will not be returned. The Government will not reimburse contractors for any cost associated with responding to this request.

Elmendorf AFB, AK is seeking interested sources capable of providing one (1) each Rebel Crusher (or equal), Rebel NB-300P Hydraulic Pulverizer with three (3) screen decks, remote control unit, self clean magnet, extra jaw die, NB-300P Hydraulic Pulverizer, Mounting Bracket, Fourty foot portable plumbed stacksers (3 each), GF-35 Hydraulic Jaw Crushing Brucket and Mounting Bracket.
Salient characteristics:
• Removable "LOW HEIGHT" Hopper. Designed to be fed with a BOBCAT or skid steer loader, excavator or front end loader.
• 30" x approx 12' Heavy Duty Belt feeder with VARIABLE SPEED ON REMOTE.
• High Frequency "SCALPING SCREEN" with under screen chute and side conveyor that folds up for transport. Screen ca be blanked off by replacing screen cloth with solid plate. Side conveyor will only be used when screen cloth is installed. Scalping screen is designed to remove unwanted dirt or fines from mixing with the finished crushed product.
• HUGE approx 20' x 36" JAW CRUSHER driven by hydraulic motor and belt drives.
• Approx 160 HP DEUTZ DIESEL POWER PLANT. "Liquid Cooled". Complete with radiator, gauges, console, Donaldson Air filter, batteries and fuel tank.
• Hydraulic valves, motors hydraulic oil reservoir, hydraulic oil cooler, plumbing lines and controls.
• RADIO REMOTE CONTROL. Controls track, crusher, screen(s), conveyors and feeder.
• Primed, painted and decalls installed.
• (2) Two-DECK SIZING SCREEN positioned after under crusher conveyor. Screen will be equipped with standard screen cloth on both decks. Comes complete with Urethane chutes to position material into three separate stock.
• Cross Belt Self Cleaning Magnet (designed to handle re-bar of various sizes and general metallic debris from concrete recycle material.)
• (3) Three stock pile conveyors to be positioned under the sizing screen and attached and powered by the plant. Conveyors will fold for transport.
• Fuel Tank Size approx 65 US Gallons.
• Hydraulic Tank Size approx 10-15 US Gallons.
• Auxiliary Available approx 10-15 US gallons @ 3500 PSI.
• Fuel Consumption approx 3-4 US gallons per hour.
• DIESEL 6 Cylinder Liquid Cooled Deutz Diesel.
• Main Hydraulic pumps Rexroth or Linde rated at 5,000 psi-operating pressure average 3,500 PSI.
• DIMENSIONS: Length: 30 feet, Width: 7.7 feet, Height: 8.7 feet, Approx Weight: 13 ton, Hopper Width: 18 inches, Hopper Length: 105 inches, Hopper Height: 90 inches.
• NB300P Pulverizer Technical Specifications: Operatiang Weight: 5732 pounds, Length: 96 inches, Width: 24 inches, Max Opening Width: 43 inches, Blade Length: 8 inches, Demolition Power: 133 tons, Operating Pressure: 4200 PSI, Applicable Carrier: 28-37 Ton.
• Crushing Bucket Specifications: Weight: 3500 KG, Height: 1432mm, Width: 1080mm, Length: 2713mm, Feeder Dimensions: 800x700mm, Output Size: 30/150mm, SAE Volume 0,7 M 3, Carrier Weight 20/28 Ton, Inner Dia HP Hose: 20mm, Inner Dia LP Hose: 30 mm, HP Thread: 1 inch GAS, LP Thread: 1 inch GAS, Oil Flow: 150/160 L/min, Working Pressure: 180/200 Bar

Or Equal Product: Must be 13 tons or less. Must be L100 Portable. Must have quoted dimensions or smaller with same output of 75 tons of material an hour to (3/4-) construction gravel. Must be capable of separating into at least three parts. Must have three stackers or equivalent.

The applicable North American Classification System (NAICS) code is 423810, with a business size of 500.

Interested and qualified sources are requested to provide: (1) company name, point of contact, e-mail address, telephone and fax numbers, type and business size; and (2) an estimate of price. Any information provided is voluntary. This information is needed for market research purposes only.

Please send responses via email to [email protected] or facsimile to 907-552-7497, by August 4, 2010 12:00 noon Alaska Time. Telephonic requests will not be accepted.

Bid Protests Not Available