STATEMENT OF WORK

The contractor shall provide all materials, plant, labor, equipment and transportation necessary to relocate localizer. Work shall include but is not limited to the following.

1. Site
a. Form and place concrete slab for new localizer location
b. Form and place concrete roadway from access road to new localizer location
c. Demo concrete pedestal next to localizer
d. Remove electrical attached to pedestal
e. Remove existing coax cable between localizer and antenna array
f. Remove localizer from existing location

2. ELECTIRICAL
a. Install new coax cable from antenna array to new localizer location cable is to be buried
b. Reroute all electrical attached to demolished pedestal to new localizer location.
c. Move localizer to new location and mount to concrete slab
d. Reconnect all necessary electrical and coax cable to antenna array and localizer
e. Test localizer for proper operation

3. The contractor shall tract the amount of construction/demolition debris and other solid waste which is disposed of under this contract. The waste will preferably be tracked by weight, but the volume (i.e., cubic yards) of the waste will also be acceptable. This information will be submitted to the contracting officer prior to the close of the contract.

4. All work will follow all federal, state and local codes and safety regulations.