001 - PULLEY, 2 GROOVE, 5.95"D, 70-0595
002 - BELT, DRIVE, BX40, 70-1451
003 - PULLEY, 2 GROOVE, 5.45"D, 70-1034
004 - BUSHING, HTD, H 1-1/8", 70-0118
005 - BUSHING, HTD H 15/16", 70-0155
006 - ELBOW, CONDUIT, 1/2" LIQ TIGHT
007 - CONNECTOR, 1/4 MNPTX1/4 OD VCO, C5074
008 - PROBE, CONDUCTIVITY, W/ BUSHING, 20-4100-CG
009 - CONNECTOR, ELEC, 3.8" LIQ TIGHT, 20-1005
010 - ENCLOSURE, NEMA 4X, 15X11X5, 20-0584
011 - KIT, HINGE, ENCLOSURE, 20-0596
012 - NIPPLE, 316, 3/4" NPTX CLOSE, 30-0522
013 - TEE, 316L, 3/4" FNPT, 3000#, 30-0584
014 - THRDPC, .75OD, .75NPT, 1500#, 316L, C5052
015 - VALVE, 3-WAY, 1/4"TUBE, 316, 60-0137U
016 - VALVE,REGULATOR, 5GPM, 316, 60-0005
017 - CONNECTOR, 1/4MNPT X 1/2OD, SW, C5032
018 - VALVE, BALL, 316, 2-WAY, 1/2" FNPT, 60-0068U
019 - ELBOW, 316, .5"MNPT X .5"SW, 30-1030
020 - VALVE, RELIEF, BRONZE, .38FNPT, 60-0141
021 - ADPTR, .38 MNPT X .50 OD MALE, C5025
022 - GAUGE,0-100 PSI, 2.5" BACK, 40-0016
023 - VALVE, BALL, 316, 2-WAY, 1/4"TUBE, 60-0098U
024 - GAUGE, 0-200, 2.5" BACK CONN, 40-1116
025 - GAGE, 0-1000 PSI, 2.5" BACK, 40-0302
026 - ADPTR, 316, ¼" FNPT X ¼" TUBE, 30-0106
027 - ELBOW, 1.0 MNPT X 1.0 FACE SEAL, 316, 30-1025
028 - FLANGE, 2.0 NPS, CL150, 316L, 30-0729
029 - GASKET, 2.0" CL600, 316SS, 30-1370
030 - O-RING, 017, BUNA-N, BULK, 30-0414
031 - O-RING, 019, BUNA-N, BULK, 30-1344
032 - O-RING, 010, BUNA-N, BULK, 30-0410
033 - RING, RETAINING, 1.0 UNION, 30-0434
034 - O-RING, PRESS VESSEL (2.5"), 30-0421
035 - VALVE, PLUG, .25MNPT, .25 TUBE, 60-0069
036 - PAD, 2.5" VESSEL SUPPORT, 40-0160
037 - CLAMP ASSY, VESSEL, 2.5", PR, 316, 32-0031
038 - TEE, 316, ¼" TUBE, 30-0899
039 - TUBING, NYL, ¼", BLACK, HIGH, 80-0007
040 - NIPPLE, NYL, ¾" NPT X CLOSE, 30-0054
041 - NIPPLE, RED, .75" MNPTX .38" MNPT, C5022
042 - WRENCH, FILTER, 99-0265
043 - RING, RETAINER, 1.50 NPS, BRNZ, 30-0194
044 - O-RING, 227, VITON, 30-0208
045 - O-RING, 025, BUNA, SINGLE, 30-1602

The award will be made in accordance with FAR 6.302-1 - Only one responsible source and no other supplies or services will satisfy agency requirements. This purchase order will be awarded using simplified acquisition procedures in accordance with FAR Part 13. This notice of intent is not a request for competitive quotes. However, all responses received within 2 days after the date of publication of this notice will be considered by the Government. A determination by the Government not to compete as a result of responses received is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.