United States of America
GSA Global Supply
1500 E. Bannister Road
Kansas City, Missouri 64131

Phone: (816) 926-3582
Email: [email protected]

FOR INFORMATION, PLEASE CONTACT: Katie Norton

Please submit your response by close of business Monday, January 27, 2014 via the above email.

Important: This is a request for quotations, and quotations furnished are not offers. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation, or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. If you are unable to quote, please so indicate on this form and return.

Please review the attached item purchase description(s).

Delivery shall be FOB Destination.

Shipment time ____________________ARO (After receipt of order)

Price is valid through ____________________________

Vendor's Minimum Order Amount, if any:___________________

Business size: Large _______ or Small ________

Vendor's DUNS Number: ____________________________________

Name & address of vendor and signature of quoter:

Name:_____________________________________________________
Address:___________________________________________________

City:_________________________________ State:________________

Telephone: _____________________________FAX: _________________

Print name:___________________________________________________

Signature:____________________________________ Date:_________

PLEASE NOTE: Effective October 1, 2003 all vendors seeking to do business with the Federal Government are required to register with the Central Contract Registration at www.ccr.gov. If you are not registered and are not willing to register we will not be able make an award to your firm.

Return pages 1, 2 and 5. Failure to return all pages will result in your quote being removed from consideration.

Please provide pricing for the following NSN(s). See description(s) below.

NSN
QTY Unit price
5180-01-432-6188
17

5180-01-432-6188 UI: KT
TOOL KIT, ELECTRICIAN'S:

DESCRIPTION

Shall be In Accordance With SAE Aerospace Standard: AS4283B - Handles and Attachments for Hand Socket Wrenches, dated December 2011

In accordance with Society of Automotive Engineers Aerospace
Standard AS954G, Wrenches, Hand Twelve Point High Strength, Thin Wall, dated 2011

Exception to AS954G dated 2011:

Exception: Paragraph 3.7 Test Proof Loads, the following requirement shall be incorporated:

Torque shall be applied with a suitable torque producing machine. Torque shall be applied at a speed of 15 deg/min to 30deg/min until proof load value is achieved; test load shall be held for 10 seconds, then torque shall be released. This proof load test shall be performed in the clockwise and counter clockwise direction. .

In accordance with American Society of Mechanical Engineers (ASME) B107.1-2002.

In accordance with American Society of Mechanical Engineers (ASME) B107.11 as contained in ASME B107.500-2010; this document incorporates and includes the revisions of primary standard B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.22, B107.23, B107.24, B107.25, B107.27 and B107.37.
.

In accordance with American Society of Mechanical Engineers (ASME) B107.13 as contained in ASME B107.500-2010; this document incorporates and includes the revisions of primary standard B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.22, B107.23, B107.24, B107.25, B107.27 and B107.37.
.

TYPE I and III Torque Wrenches Shall be in accordance with American Society of Mechanical Engineers (ASME) B107.14 as contained in ASME B107.300-2010; this document incorporates and includes the revisions of primary standard B107.14, B107.28, and B107.29.

TYPE II Torque Wrenches Shall be in accordance with the SAE International Aerospace Standard AS 28431; Aerospace Hand Torque Wrenches (Mechanical, Impulse)

In accordance with American Society of Mechanical Engineers (ASME) B107.20 as contained in ASME B107.500-2010; this document incorporates and includes the revisions of primary standard B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.22, B107.23, B107.24, B107.25, B107.27 and B107.37.

In accordance with American Society of Mechanical Engineers (ASME) B107.23 as contained in ASME B107.500-2010; this document incorporates and includes the revisions of primary standard B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.22, B107.23, B107.24, B107.25, B107.27 and B107.37.

In accordance with American Society of Mechanical Engineers (ASME) B107.37 as contained in ASME B107.500-2010; this document incorporates and includes the revisions of primary standard B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.22, B107.23, B107.24, B107.25, B107.27 and B107.37.

In accordance with American Society of Mechanical Engineers (ASME) B107.9 as contained in ASME B107.100-2010; this document incorporates and includes the revisions of primary standard B107.6, B107.8, B107.9, B107.21, B107.39, B107.40, and B107.66.

Wrench Length Shall be In Accordance With SAE 954 for specific Type, Class and Style.

In accordance with ASME B18.3-2003, Socket Cap, Shoulder and Set Screws, Hex and Spline Keys.

Item conforms to latest revision of American Society for Testing and Materials (ASTM) F 1505, Standard Specification for Insulated and Insulating Hand Tools.

Material: use of composite - inherent non-conductive, light weight, and high strength; torque failure - 20 foot-pound;
Quantity: 1 each
Number of Components: 59
Length Tolerance: 0.250 inch
All tools meet or exceeed requirements for insulated and insulating hand tools

Composite screwdriver, electrician's tip
Slotted, tip width: 1/8 inch; overall length: 3 inch; shaft diameter: no larger than tip width; features: cushion grip
Robertson, tip: #2; overall length: 6 inch; shaft diameter: no larger than tip width; features: cushion grip
Slotted, tip width: 3/16 inch; overall length: 6 inch; shaft diameter: no larger than tip width; features: cushion grip
Slotted, tip width: 1/4 inch; overall length: 6 inch; shaft diameter: no larger than tip width; features: cushion grip
Slotted, tip width: 5/16 inch; overall length: 6 inch; shaft diameter: no larger than tip width; features: cushion grip
Phillips, tip: #2; overall length: 4.5 inch; shaft diameter: no larger than tip width; features: cushion grip
Phillips, tip #2; overall length: 7 inch; shaft diameter: no larger than tip width; features features: cushion grip

Insulated Lineman Pliers - B107.20 - Type: 1 (linesman's), Class: 2 (round head); overall length: 9.25 inch; features: high leverage design, insulated handle, New England style

Insulated Needle Nose Pliers - B107.13 - Type: III (round nose), Class: 1 (long nose), Style: B (with cutter); overall length: 8 inch; features: wire cutting, insulated handle

Insulated Diagonal Cutting Pliers - B107.11 - Type: 1 (diagonal cutting, regular nose), Class: 3 (flush cutting edges); overall length: 7 inch; features: bevel cutting, insulated handle

Insulated Cable Cutters - overall length: 9.5 inch; capacity: 4/0 aluminum, 2/0 copper; features: high leverage, insulated handle

Insulated Water Pump Pliers - B107.23 - Type: 1 (adjustable joint, angle nose), Class: 1 (multiple grooves and tongue), Style: B (curved, serrated jaws); overall length: 10 inch; jaw opening capacity: 1.5 inch; features: positive locking design, insulated handle, slide adjustable, box joint

Insulated Wire Stripper - B107.37 - Type: 2 (wire cutters/strippers, flat jaws and handles), Class: 2 (large frame, strippers forward of pivot); overall length: 8.25 inch; wire capacity: #10 to 22AWG; features: crimping capability, insulated handle

Insulated Socket Head Screw Key Wrench Set - B18.3 - sizes: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, and 1/2 inch; length of arm: long; shape: hexagonal 'L' configuration; features: insulated long arm

Insulated Wrench Set, Box End - B107.9 - Box Wrench, double head, Type: 1 (15 deg offset), Class: 1 (regular length); sizes: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, and 7/8 inch; 12 point; features: insulated handle; single head application, opposite end head removed at shaft end

Insulated Wrench Set, Socket - AS954 - Type: 1 (Sockets), Class: 1 (Sockets), Style: A (Standard Length); sizes: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, and 7/8 inch; 12 point; features: insulated

Insulated Socket Wrench Driver - AS4283 - Type: 1 (Handles), Class: 2 (Ratchet, reversible), Syle: A (Coarse action); overall length: 7 inch, features: reversible rotation, insulated handle, raised rotation lever allows reversing while wearing gloves

Insulated Extension Bar - AS4283 - Type: 2 (Attachments), Class: 2 (Bar, extension, solid); overall length: 3 and 6 inch; drive size: 3/8 inch; features: insulated shaft, lap-over insulated ends

Composite Nut Driver - B107.12 - Type: 1 (Conventional length), Class: 2 (Hollow shaft), Style: B (Cushion grip handle); designed to function on all panels and state terminal blocks
Hexagonal Size: 3/16 inch; overall length: 6 inch; features: hollow shaft, screwdriver grip
Hexagonal Size: 1/4 inch; overall length: 6 inch; features: hollow shaft, screwdriver grip
Hexagonal Size: 5/16 inch; overall length: 6 inch; features: hollow shaft, screwdriver grip
Hexagonal Size: 11/32 inch; overall length: 6 inch; features: hollow shaft, screwdriver grip
Hexagonal Size: 3/8 inch; overall length: 6 inch; features: hollow shaft, screwdriver grip
Hexagonal Size: 7/16 inch; overall length: 6 inch; features: hollow shaft, screwdriver grip
Hexagonal Size: 1/2 inch; overall length: 6 inch; features: hollow shaft, screwdriver grip

Insulated Micrometer Torque Wrench - B107.14M - Type: 2 (Setting), Class: A (Graduated), Style: 1 (Non-ratcheting), Design: B (clockwise torqueing); 3/8 inch drive; overall length: 10 inch; Range: 30-150 inch-pound; features: insulated handle, micrometer setting

Certified Insulated Products part number 16029 or equal.

Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

FAR Provisions 52.211-6, Brand Name or Equal Applies.

ITEM MARKING

Each item Shall Be Marked in a Permanent and Legible Manner with:

1) Manufacturer's Part Number
2) Manufacturer's Name or Identifying Symbol, and
3) Country of Origin

Each Package including the unit, single, intermediate, and exterior container must be labeled with the requisition number or Transportation Control Number (TCN). Requisition Number and TCN are found on the Purchase Order.

PACKAGING

One (1) item shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage.

MARKING

All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to the GSA DEPOT and MILITARY ACTIVITIES shall be in accordance with the latest version of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site:

http://assist.daps.dla.mil/quicksearch/

NOTICE: All Pallets transported / Shipped to the GSA Depot MUST be HEAT TREATED and marked IAW IIPC

Palletization: The shipping (transport) containers shall be palletized. The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, and double-face non-reversible pallets. The palletized load shall not exceed 2500 pounds in weight for shipments to the Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (French Camp Location). The palletized load shall not overhang the pallet deck board edge by more than 1 inch and shall not exceed 53 inches in overall height (including pallet). Less than half pallet loads or loads shipped by small package carrier in acceptable transport packing need not be palletized. When less than full but more than a half pallet is used, the palletized load shall utilize proper bracing and/or reinforcement to ensure that the load can withstand two additional loads placed on it.

Stacking: A load-stacking test shall be performed once, at the beginning of the contract, for each different unitized or palletized load configuration. A fully palletized load shall be tested utilizing a total stack of three palletized loads, with all the proper bracing and/or reinforcement necessary to perform the test. There shall be no evidence of damage to the pallets, shipping containers or products when stack is tested on the rigid surface for a minimum of 24 hours, in compliance with all the National and Local Safety Regulations. The pre-tested palletized load configuration shall be duplicated using the same packaging materials, pattern, number of shipping (transport) containers, and procedures consistent throughout the duration of the contract. Palletized loads shall be stable and safe when handled with mechanical equipment by qualified personnel.

Materials: All lumber used inside or outside a shipment shall be bark free. No used wood pallets with repaired components or stringers will be acceptable. All wood pallet stringers shall be manufactured from hardwoods. Pallets manufactured of materials other than wood, shall conform to all the requirements specified herein.

Unitization: For the purpose of this requirement, the assembled group of containers or items in a single load that can be handled as a unit throughout the distribution system. Unitization encompasses, but is not limited to, consolidation in a container, placement on a pallet or load base having forklift capability, or securely binding together. Shipments should be considered for unitization where appropriate or specified.

Unitization of pallet load: The palletized load shall be unitized and secured to the pallet to insure that the load arrives intact without product damage. The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Vertical, horizontal or filler reinforcement shall be added as necessary to meet the stacking strength requirements. A palletized load shall be secured to the pallet by shrink or stretch wrapping, and/or, by steel or nonmetallic strapping. When steel or nonmetallic strapping is used, edge protectors shall be provided to prevent damage to the cartons when tensioning the strapping. As a minimum, two straps shall run lengthwise, two straps shall run widthwise, and two straps shall run around the girth of the palletized load. A palletized load shall be capable of protecting the products against damage in a multiple handling, transportation, and storage environment having distribution warehouses with rack systems that support the load/s overhead of warehouse personnel.

Notice of special requirements for shipment to all countries, GSA Depots and DLA Consolidated Shipping Points that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published Guidelines for Regulating Wood Packaging Material in International Trade. Countries endorsing the IPPC Guidelines are found at the website given below. General Services Administration Acquisition Manual (GSAM) Clause 552.211-89 requires non-manufactured wood pallets and other non-manufactured wood packaging material used to pack items for delivery to or through IPPC countries be marked and properly treated in accordance with IPPC guidelines. Pallets and packing material shipped to FAS distribution facilities designated for possible delivery to the countries endorsing the IPPC Guidelines will comply with DLAD 47.305-1, and MIL-STD-2073-1.

http://www.aphis.usda.gov/import_export/plants/plant_exports/wpm/country/index.shtml

UNIT PACKAGES:

The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200 psi, or Edge Crush Test (ECT) 32 Lbs. per Inch Width.

Brand Name or Equal Submissions:

FAR Provisions 52.211-6, Brand Name or Equal Applies