Past Bid Detail | BidFortune

Past Bid Detail Page

Hi,

Federal Bid

Last Updated on 23 Jul 2011 at 8 AM

Combined Synopsis/Solicitation

Location Unknown

Rubber, Sheet Solid

Solicitation ID SPM8E3-11-Q-0793

Source Signup to get source link

Posted Date 08 Jun 2011 at 7 PM

Archive Date 23 Jul 2011 at 5 AM

NAICS Category

Product Service Code

Set Aside No Set-Aside Used

Contracting Office Dla Troop Support - Construction & Equipment

Agency Department Of Defense

Location United states

Madelyn V. Jones

Contracting Officer

[email protected]

Phone

2157373553

ITEM DESCRIPTION FOR PR: 0041744067

NSN:9320-00-241-9754

RUBBER SHEET, SOLID
SMOOTH FINISH BOTH SIDES,
36 IN WIDTH, 36 IN LENGTH, 0.062 IN THICKNESS,
UNIT OF ISSUE = SH (SHEET)

THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE SECTION L, CLAUSE
52.211-2 FOR ORDERING SUCH DATA.

CRITICAL ITEM - SOURCE INSPECTION REQUIRED.

ALL PRODUCTS WILL BE MARKED/PACKAGED AS REQUIRED
BY THE APPLICABLE SPECIFICATION AS CITED IN THIS
CONTRACT. IN ADDITION, ALL RUBBER MATERIALS
SHALL BE MARKED WITH THE SPECIFICATION NUMBER,
TYPE, CLASS, AND CURE DATE (QUARTER AND YEAR).
MARKING WILL MEET ALL REQUIREMENTS AS SPECIFIED
IN MIL-STD-190. SHEET MATERIAL MARKING SHALL BE
1/2 INCH HIGH OCCURRING EVERY 6 INCHES
CONTINUOUSLY ACROSS THE SHEET AND RECURRING
LENGTHWISE EVERY 4 INCHES ON ONE SIDE ONLY. ON
SMALL MOLDED PRODUCTS WHERE THE CROSS-SECTIONAL
DIAMETER IS NOT SUFFICIENT OR FUNCTIONAL
SURFACES DO NOT PERMIT MARKING IN ACCORDANCE
WITH THIS INSTRUCTION, EQUIVALENT MARKING SHALL
BE PLACED ON THE INDIVIDUAL PACKAGES.
*** FAILURE TO COMPLY WILL BE CAUSE FOR
REJECTION OF END PRODUCT. ***

DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION
TESTING,IS HEREBY INCORPORATED,AND MAY BE
INVOKED AT THE DISCRETION OF THE PROCUREMENT
ACTIVITY.

ASQ H1331 Table 1 Shall be used, and will take
precedence over Sample
Size Coding methods and Sampling Plan tables as
outlined in military and
federal specifications, standards, Commercial
Item Descriptions (CIDs)
prepared by DoD activities, and those sampling
plans cited by military
service and DLA Troop Support - Quality
Assurance Provisions (QAPs).
Those documents that identify the
classification of characteristics as
critical, major, and minor, shall have
corresponding associated AQL
Index values of 0.10,1.0, and 4.0 respectively.
ASQ H1331 takes
precedence over non-government standard ASQ
Z1.4.

Those specifications, standards, CIDs, drawings
and QAPs using sampling
plans based on zero acceptance are excluded from
these requirements, as
are those not specifying characteristics as
"critical", "major", and/or
"minor".

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT
CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT.

TYPE I 180 MONTHS (15 YEAR) SHELF LIFE ITEM:

MATERIAL FURNISHED UNDER THIS CONTRACT/ORDER
SHALL
HAVE AT LEAST 85% OF THE SHELF LIFE
REMAINING AT TIME OF DELIVERY. SHELF LIFE
MARKINGS (CURE AND EXPIRATION DATES) SHALL
BE IN ACCORDANCE WITH MIL-STD-129, LATEST
REVISION, AND SHALL BE SHOWN IN
CALENDAR QUARTER AND YEAR. EXPIRATION DATE SHALL
BE 15 YEARS FROM CURE DATE.

Contractor is responsible for a COQC
(Certificate of Quality Conformance) that will
also include performance to FAT requirements as
needed.

CRITICAL APPLICATION ITEM

I/A/W SPEC NR MIL-R-6855E SUP 1 NOT 2
BASIC
AMEND NR E
TYPE NUMBER CL 2, TY A, GR 60

I/A/W STD NR MIL-STD-129P(3)
REFNO
AMEND NR P
TYPE NUMBER

PRLI 0001 222 SH

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP = ZZZ: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = 00:
WRAP MAT = ZZ: CUSH/DUNN MAT = ZZ: CUSH/DUNN THKNESS = X:
UNIT CONT = ZZ: OPI = O:
INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:
PACK CODE = U:
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE: 00 -
PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B
DATED 08183
SUPPLEMENTAL INSTRUCTIONS
PACKAGE IAW MIL-R-6855
QUP ZZZ: PACKAGERS OPTION
.

For all shipments of packaged materiel to the government,
which includes either Depot (DLA-Direct) or DVD (Customer-
Direct) shipments, both DoD linear and two-dimensional (2D)
bar code markings are required on Military Shipping Labels
in accordance with MIL-STD-129, Revision P, dated December
15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the
requirement for MSL and 2D symbols). See the DLA packaging
web site identified in DLAD 52.211-9010(E) for change
notices to MIL-STD-129P that apply. 2D bar coding shall be
in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3)
and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar
coding shall be in accordance with ISO/IEC 16388. Shipping
label stock quality shall meet MIL-PRF-61002. Bar code print
quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000)
for applicable 2D and/or linear bar codes. All DVD shipments
shall meet additional linear bar coding requirements in DLAD
52.211-9010(C). Except for the Transportation Control Number
(TCN), which must always be present on the Military Shipping
Label, when the contract/order omits any other data elements as
defined in MIL-STD-129P and if the information is not available
from the Administrative Contracting Office, then the field is
not required as part of the Military Shipping Label and may be
left blank. If there are inconsistencies between the schedule
and MIL-STD-129P, the schedule takes precedence.