Please review the below NSN and all attached technical requirements and provide us with any sources that are able to manufacture the item. Please also provide the location of the manufacturer (City and State OR country if applicable). Please also provide POCs for these manufacturers if available. All of this information can be submitted to

David Nelson at David.Nelson@dla.mil, Phone 614 692 7893. We thank you in advance for your assistance.

NSN :1010-00-181-3413

TECHNICAL REQUIREMENTS FOR SOLICITATION SPM7LX-12-R-0060

 NOTE: Palletization shall be in accordance with MD00100452 REV B dated 7/30/08.

 PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN

 NSN:  1010001813413

      CRITICAL APPLICATION ITEM

     SEAR, STEEL.

     THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN

     AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS

     REGULATIONS (22 C.F.R. §§ 120-30) AND THE ARMS

     EXPORT CONTROL ACT (22 U.S.C.A. §§2778-2799).

     ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES

     IS REQUIRED TO REGISTER WITH THE DIRECTORATE OF

     DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF

     STATE. DOCUMENTARY EVIDENCE OF REGISTRATION MAY

     BE REQUIRED PRIOR TO AWARD. ADDITIONAL EXPORT

     RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE

     TO SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL

     MAKE A QUOTE/OFFER INELIGIBLE FOR AWARD.

     DUE TO THE CRITICAL APPLICATION OF THIS ITEM,

     SOURCES ARE RESTRICTED TO APPROVED SOURCES ONLY.

     EVEN THOUGH APPROVED SOURCES AND PART NUMBERS

     ARE PROVIDED, THE ITEMS FURNISHED MUST ALSO MEET

     THE REQUIREMENTS OF THE CITED DRAWINGS. ANY

     UNAPPROVED SOURCE SEEKING APPROVAL WILL BE SUBJECT

     TO A MANDATORY PREAWARD SURVEY, GOVERNMENT FIRST

     ARTICLE TESTING, AND PRODUCT VERIFICATION TESTING.

     THE GOVERNMENT MAY CONSIDER MULTIPLE AWARDS IN

     ACCORDANCE WITH DSCC PROVISION 52.217-9C07-SUPPLY

     ASSURANCE THROUGH MULTISOURCE CONTRACTING.

     __________ ENGINEERING EXCEPTION DATA __________

     QQ-C-320 HAS BEEN REPLACED BY AMS 2460. PLEASE

     ASSURE ALL REQUIREMENTS OF THIS SPECIFICATION ARE

     COMPLIED WITH.

     ______ END OF ENGINEERING EXCEPTION DATA ______

     ________ SPECIAL PACKAGING REQUIREMENTS ________

     UNLESS OTHERWISE SPECIFIED, CLEANING AND DRYING

     SHALL BE IN ACCORDANCE WITH PARAGRAPH 5.2.1 OF

     MIL-STD-2073-1.

     BAG SHALL BE NON-TOXIC, TRANSPARENT, 4 MIL THICK

     POLYETHYLENE FILM HAVING A MULTI-METAL VOLATILE

     CORROSION INHIBITOR. BAG SHALL BE FABRICATED IN

     ACCORDANCE WITH MIL-DTL-117 FOR A CLASS-B BAG.

     SUGGESTED SOURCES OF SUPPLY:

     CORTEC / VpCI 126

     DAUBERT-CROMWELL / CLEAR PAK 3000

     ZERUST / ICT 510-C

     COMPATIBILITY PROVISIONS OF MIL-I-8574 APPLY.

     _____ END OF SPECIAL PACKAGING REQUIREMENT _____

     IF REQUIRED BY CONTRACT, GOVERNMENT FIRST

     ARTICLE TEST APPLIES. 5 EXHIBITS ARE REQUIRED.

     PRODUCT VERIFICATION TESTING (PVT) CLAUSE DLAD

     52.246-9004 IS INVOKED FOR THE REFERENCED

     CONTRACT. PVT SAMPLES MUST BE INSPECTED, PACKAGED

     AND MARKED AS REQUIRED IN THE CONTRACT. ONE (1)

     SAMPLE MAY BE DESTROYED DURING TESTING.

     PRODUCT VERIFICATION TESTING IS MANDATORY AND

     WILL BE PERFORMED PRIOR TO ACCEPTANCE OF EACH

     SHIPMENT.

     CONTRACTOR MUST NOTIFY COGNIZANT DCMA QAR 30

     DAYS PRIOR TO DELIVERY OF MATERIAL FOR PRODUCT

     VERIFICATION TESTING TO BE SCHEDULED.

     REFERENCE NUMBER: CQC20

     REFERENCE NUMBER: CQC05

     REFERENCE NUMBER: CQ009

     REFERENCE NUMBER: CQC04

     REFERENCE NUMBER: CS001

     REFERENCE NUMBER: ZD025

     REFERENCE NUMBER: CS086

     REFERENCE NUMBER: A1202

     WAIVED SOURCE FOR FIRST ARTICLE TESTING (19204) JMTC

     SPECS/STD/DRAWINGS:

     I/A/W DRAWING NR      19200 8448342

     REFNO       DTD 09 OCT 19

     AMEND NR  DTD 09 SEP 09

     TYPE NUMBER:

     I/A/W QAP         19200 12993884

     REFNO       DTD 06 OCT 06

     AMEND NR B DTD 05 AUG 10

     TYPE NUMBER:

     I/A/W DRAWING NR      19200 L2S3025

     REFNO       DTD 08 APR 07

     AMEND NR D4 DTD 02 MAY 03

     TYPE NUMBER:

     I/A/W DRAWING NR      19204 8448342

     REFNO       DTD 08 OCT 31

     AMEND NR R DTD 08 OCT 07

     TYPE NUMBER:

     I/A/W DRAWING NR      19204 8448342

     REFNO       DTD 08 NOV 04

     AMEND NR E DTD 08 APR 24

     TYPE NUMBER:

     I/A/W DRAWING NR      19200 12579607

     REFNO       DTD 10 SEP 14

     AMEND NR C DTD 09 AUG 04

     TYPE NUMBER:

     I/A/W DRAWING NR      19200 L10S3059

     REFNO       DTD 10 JUL 07

     AMEND NR  DTD 10 JUL 01

     TYPE NUMBER:

     PREP FOR DELIVERY

     LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

     QUP = 001: PRES MTHD = 41: CLNG/DRY = 1: PRESV MAT = 0

     WRAP MAT = 00: CUSH/DUNN MAT = 00: CUSH/DUNN THKNESS = 0:  

     UNIT CONT = BV: OPI = P:                  

     INTRMDTE CONT = DO: INTRMDTE CONT QTY = AAA:               

     PACK CODE = U:                                             

     MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

     SPECIAL MARKING CODE: 00 -  No special marking

     PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A 

     DATED 04090

******************************************************************************

                                GLOSSARY

******************************************************************************

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

     For all shipments of packaged materiel to the government,

     which includes either Depot (DLA-Direct) or DVD (Customer-

     Direct) shipments, both DoD linear and two-dimensional (2D)

     bar code markings are required on Military Shipping Labels

     in accordance with MIL-STD-129, Revision P, dated December

     15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the

     requirement for MSL and 2D symbols).  See the DLA packaging

     web site identified in DLAD 52.211-9010(E) for change

     notices to MIL-STD-129P that apply.  2D bar coding shall be

     in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3)

     and DoD 4500.9-R.  MSL linear (code 3 of 9 or code 39) bar

     coding shall be in accordance with ISO/IEC 16388.  Shipping

     label stock quality shall meet MIL-PRF-61002.  Bar code print

     quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000)

     for applicable 2D and/or linear bar codes.  All DVD shipments

     shall meet additional linear bar coding requirements in DLAD

     52.211-9010(C).  Except for the Transportation Control Number

     (TCN), which must always be present on the Military Shipping

     Label, when the contract/order omits any other data elements as

     defined in MIL-STD-129P and if the information is not available

     from the Administrative Contracting Office, then the field is

     not required as part of the Military Shipping Label and may be

     left blank.  If there are inconsistencies between the schedule

     and MIL-STD-129P, the schedule takes precedence.

ITEM DESCRIPTION TEXT

     REFERENCE NUMBER CQC20:

     THE INTERNATIONAL ORGANIZATION FOR

     STANDARDIZATION (ISO) 9002 OR A "TAILORED"

     PROGRAM MEETING THE FOLLOWING ISO 9002

     PARAGRAPHS APPLIES:

     4.5, DOCUMENT CONTROL: LIMITED TO INSPECTION

     AND TESTING AS WELL AS APPLICABLE DRAWINGS,

     SPECIFICATIONS AND INSTRUCTIONS REQUIRED BY

     CONTRACT

     4.6, PURCHASING: 4.6.1 AND LIMITED TO 4.6.2 A)

     AND 4.6.4.2, ALL OTHER PARTS OF PARAGRAPH

     ARE HEREBY DELETED

     4.7, CUSTOMER-SUPPLIED PRODUCT:

     4.8, PRODUCT IDENTIFICATION & TRACEABILITY:

     4.10, INSPECTION & TESTING:

     4.11, INSPECTION, MEASURING & TEST EQUIPMENT:

     4.12, INSPECTION AND TEST STATUS:

     4.13, CONTROL OF NONCONFORMING PRODUCT:

     4.14, CORRECTIVE AND PREVENTIVE ACTION:

     PARAGRAPH 4.14.3 APPLY TO PRODUCT ONLY

     4.16, QUALITY RECORDS:

     FAR CLAUSE 52.246-11 APPLIES

     REFERENCE NUMBER CQC05:

     DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION

     TESTING,IS HEREBY INCORPORATED,AND MAY BE

     INVOKED AT THE DISCRETION OF THE PROCUREMENT

     ACTIVITY.

     REFERENCE NUMBER CQ009:

     IF AQLS ARE LISTED IN THE SPECIFICATION(S)

     OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE

     AUTHORIZED SAMPLE SIZE,HOWEVER,THE ACCEPTANCE

     NUMBER FOR THIS CONTRACT IS ZERO;I.E.,THIS

     CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS

     ON ZERO DEFECTS AND REJECTS ON ONE OR MORE

     DEFECT(S).

     REFERENCE NUMBER CQC04:

     DLAD 52.246-9003, MEASURING AND TEST EQUIPMENT,

     APPLIES.

     REFERENCE NUMBER CS001:

     THIS ITEM HAS TECHNICAL DATA THAT IS SUBJECT TO

     EXPORT CONTROL REGULATIONS, OR THE ITEM HAS NO

     TECHNICAL DATA BUT IT IS LISTED ON THE UNITED

     STATES MUNITIONS LIST (USML) OR THE COMMERCE

     CONTROL LIST (CCL), AND IT IS THEREFORE

     CONTROLLED FOR EXPORT BY THE INTERNATIONAL

     TRAFFIC IN ARMS REGULATION (ITAR) OR EXPORT

     ADMINISTRATION REGULATION (EAR).  (SEE DFARS

     CLAUSE 252.204-7008.)

     DISTRIBUTION OF THE TECHNICAL DATA AND

     ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE

     SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION,

     OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS

     OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS

     PURSUANT TO INTERNATIONAL AGREEMENTS.

     TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM

     2345, "MILITARY CRITICAL TECHNICAL DATA

     AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE

     WEB ADDRESS:

     HTTP://WWW.LOGISTICSINFORMATIONSERVICE.DLA.MIL/J

     CP/,

     OR BY WRITING TO:

     UNITED STATES/CANADA JOINT CERTIFICATION OFFICE

     DLA LOGISTICS INFORMATION SERVICE

     FEDERAL CENTER

     74 WASHINGTON AVE., NORTH

     BATTLE CREEK, MI 49017-3084

     TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED

     SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING

     LICENSE AGREEMENT, TECHNICAL ASSISTANCE

     AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE

     PROCUREMENT AGREEMENT APPROVED BY THE

     DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE

     OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS

     OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL

     APPLICABILITY," AND/OR EAR PART 740 ARE

     APPLICABLE.

     NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT

     CONTROLLED TECHNICAL DATA ARE REQUIRED TO

     PROVIDE THE CONTRACTING OFFICER WITH AN

     APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR

     EXEMPTION APPLIES TO RECEIVE A COPY OF THE

     EXPORT CONTROLLED TECHNICAL DATA.

     NOTE:  SUPPLIERS ARE REQUIRED TO IDENTIFY

     SUB-CONTRACTORS AT TIME OF QUOTING IF KNOWN.

     USE OF ANY SUB-CONTRACTOR SUPPLIER WILL REQUIRE

     JCP CERTIFICATION APPROVAL.

     REFERENCE NUMBER ZD025:

     MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

     NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT

     CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED

     UNDER THIS CONTRACT.

     REFERENCE NUMBER CS086:

     THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

     MUST MEET QPL/QML SPECIFICATIONS.BY SUBMITTING

     AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML

     COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE

     APPLICABLE QPL(S)/QML(S).

     REFERENCE NUMBER A1202:

     CASTING/FORGING MAY BE REQUIRED TO MANUFACTURE

     THIS NSN. IF A CASTING/FORGING IS REQUIRED,

     TOOLING IS TYPICALLY INVOLVED. THE GOVERNMENT

     MAY NOT HAVE THIS SPECIAL TOOLING. ASSISTANCE

     WITH FORGING AND CASTING SOURCES MAY BE FOUND AT

     THE WEB SITE BELOW.

     http://www.aviation.dla.mil/ExternalWeb/UserWeb/

     AviationEngineering/Engi

     neering/valueengineering/AFCAT/AFCAT.asp