Science Engineering Research Facility (SERF) Air Handler Unit (AHU) Replacement The 4 air handling units at Science Engineering Research Facility (SERF) lab building have exceeded their useful life. The project scope is to provide MEP, structural and architectural services to replace 4 existing air handling units with custom “Fan Wall” units. The scope will include updating the current controls to each air handling unit with connection to the existing Metasys Building Management System (BMS). Anticipated Project Duration: 270 Days. Basic Sciences Building (BSB) AHU-12 Replacement The project consists of replacing one air handler and associated control system located in mechanical room at Basic Science Building. New AHU will be a custom fan wall of similar dimensions, chilled water, heating hot water and duct work connections, new variable frequency drives with disconnects will be provided with the AHU. New AHU will be required to be built in sections due to space constraints. The scope will include new branch piping with DDC actuated control valves, PIB, trim and insulation. Anticipated Project Duration: 210 Days. The University seeks Contractors with demonstrated experience in renovations to building MEP systems to accommodate equipment installations within an operational commercial or institutional research facility. Specific experience requirements include: work within an operational research facility; renovations/ upgrades to existing outdated equipment; projects with limited lay down area and minimal footprint; structural steel framing, building systems automated controls, temporary systems, major facility system shutdowns that require extensive coordination with end-users. The Contractor shall have demonstrated an average annual business revenue of at least $7 million over the last five (5) consecutive years. The Contractor must have demonstrated experience on their best three (3) comparable projects with the Contractor providing services as a Prime Contractor within the last ten (10) years. Projects should have possessed the following construction challenges: Urban site work with limited construction and staging areas; Planning, scheduling, and installation of mechanical and electrical systems that integrate with existing building controls; Repair of systems requiring proactive and innovative solutions due to unknown and/or unforeseen field conditions; Phasing of multiple trades to minimize construction time; Renovation work requiring complex phasing solutions to maintain egress and utilities. Download all prequalification files attached. Prequalification Submission: Each prospective Contractor must submit electronically one (1) complete prequalification questionnaire in PDF format. Prequalification Questionnaires shall be emailed to the following email address(es): Hiroko Wilson, Contracts Administrator Email: [email protected] Cc: Kimberly Santiago [email protected] No Prequalification Questionnaire will be received after 12:00 P.M., FRIDAY, JANUARY 14, 2022. Firms who submitted the Prequalification Questionnaire by the previous due date of November 19, 2021 are not required to re-submit. Confidentiality of the information provided will be respected to the extent permitted by law. Response to the Prequalification Questionnaire must be submitted on the forms contained within the Prequalification Questionnaire available at the address above. All information requested in these forms must be provided in order to be considered "responsive" to the requirements of the prequalification. The University contacts are William Pavlick, Senior Project Manager, Facilities Management, 858-265-4961, Sam Farmer, Senior Project Manager, Facilities Management, 858-265-5474 or Rhonda Mitchell, Contracts Manager, Capital Program Management (858) 822-3126.

Bid Protests Not Available