G
NSN 6140-01-266-1633 and 6140-01-498-2223, Batteries Storage, being solicited in accordance with (IAW) MIL-PRF-8565 per the Qualified Parts Lists (QPLs), with an estimated annual demand quantity of 550 each for NSN 6140-01-266-1633 and 439 each for NSN 6140-01-498-2223, and requested delivery of 152 days for both NSNs. F.O.B. and Inspection/Acceptance requested is Origin. All responsible sources may submit an offer/quote which shall be considered.
Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Product Lists, Military Handbooks, and other standardization documents from the DoD Single Stock Point (DODSSP), in Philadelphia, PA. Most documents are available in Adobe PDF format from the ASSIST database via the Internet at http://assist.daps.mil.
Users may search for documents using the ASSIST-Quick Search and, in most cases, download the documents directly via the Internet using standard browser software.
Documents not available for downloading from ASSIST can be ordered from the DODSSP using the ASSIST Shopping Wizard, after establishing a DODSSP Customer Account by following the registration procedures or by phoning the DoDSSP Special Assistance Desk at (215) 697-2179 (DSN: 442-2179). Users not having access to the Internet may contact the DODSSP Special Assistance Desk at (215) 697-2179 (DSN: 442-2179) or mail requests to the DODSSP, Bldg. 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. Patterns, Drawings, Deviations Lists, Purchase Descriptions, etc., are not stocked at the DODSSP.
NSN: 6140012661633
CRITICAL APPLICATION ITEM
BATTERY,STORAGE
FLIGHT SAFETY CRITICAL AIRCRAFT PART
LEAD ACID, CHARGED, STARVED MAINTENANCE FREE
QPL APPLIES
SHELF LIFE: TYPE I, 18 MONTHS
THIS SHELF LIFE ITEM IS NON-EXTENDABLE, CODE K,
WITH A TOTAL SHELF LIFE OF EIGHTEEN MONTHS.
MATERIAL FURNISHED UNDER THIS CONTRACT/ORDER
SHALL HAVE AT LEAST 85% (15 MONTHS) OF THE SHELF
LIFE REMAINING AT TIME OF DELIVERY.
MSDS/PSDS IS REQUIRED PER FED-STD-313.
EXCEPTION DATA: NO CONTRACT LOTS SHALL BE
RELEASED FOR SHIPMENT UNTIL LOT ACCEPTANCE
TESTING IS MET AND FINAL APPROVAL IS GIVEN
BY THE CONTRACTING ACTIVITY. TEST SAMPLES SHALL
NOT BE INCLUDED IN CONTRACT QUANTITY.
SHIPPING NAME BATTERY, WET, NON-SPILLABLE
THIS NSN HAS QUALIFIED PRODUCT LISTS (QPL)
REQUIREMENTS.
1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008
,DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A
SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED.
2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR
REJECTION OF THE ENTIRE CONTRACT QUANTITY.
HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT
(GOVERNMENT SPECIFICATION) (APR 1984)
- FAR 52.246-11
.
(A) DEFINITION. "CONTRACT DATE," AS USED IN THIS
CLAUSE, MEANS THE DATE SET FOR BID OPENING OR,
IF THIS IS A NEGOTIATED CONTRACT OR A
MODIFICATION, THE EFFECTIVE DATE OF THIS
CONTRACT OR MODIFICATION.
.
(B) THE CONTRACTOR SHALL IN EFFECT ON THE
CONTRACT DATE, COMPLY WITH THE INTERNATIONAL
ORGANIZATION FOR STANDARDIZATION (ISO) 9001
STANDARD.
DLAD 52.246-9003, MEASURING AND TEST EQUIPMENT,
APPLIES.
MIL-STD-130N DATED 17 DEC 2007.
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
THE CONTRACTOR SHALL PREPARE A MATERIAL SAFETY DATA SHEET (MSDS) AS DIRECTED BY FAR 52.223-3, HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA (JAN 1997). A COPY OF THE APPLICABLE HAZARD WARNING LABEL(S)(HWL) SHALL BE SUBMITTED WITH THE MSDS AS DIRECTED BY DFARS 252.223-7001, HAZARD WARNING LABELS (DEC 1991). THE MSDS SHALL BE IAWFEDERAL STANDARD 313 (LATEST
REVISION) AND CONFORM TO OSHA'S HAZARD COMMUNICATION STANDARD IN TITLE 29 CFR 1910.1200 (LATEST REVISION) AND SHALL BE SUBMITTED BY THE APPARENTLY SUCCESSFUL OFFEROR PRIOR TO CONTRACT AWARD AS DIRECTED BY DLAD 52.223-9000, MATERIAL SAFETY DATA SHEETS AND HAZARD WARNING LABELS(MAR 1992). TO SATISFY THE FED-STD-313 REQUIREMENT, THE CONTRACTOR SHALLSUBMIT THE APPLICABLE MSDS
AND HWL TO THE LOCAL ADMINISTERING AGENCY'S CONTRACTING OFFICE FOR PROCEDURAL REVIEW AND APPROVAL PRIOR TO CONTRACT AWARD. CONTRACTOR MUSTEXERCISE A DUTY OF CARE THAT EACH MSDS BE REGULARLY UPDATED (USUALLY EVERY THREE TO FIVE YEARS) OR WITHIN 3 MONTHS OF ANY CHANGES PER U.S.CODE, TITLE 42, CHAPTER 116, SUBCHAPTER II, PARAGRAPH 11021(D).
REFERENCE NUMBER: ZQA03
SPECS/STD/DRAWINGS:
I/A/W SPEC NR MIL-PRF-8565K NOT 1
REFNO DTD 06 OCT 02
AMEND NR K DTD 06 OCT 02
TYPE NUMBER:
I/A/W SPEC NR MIL-PRF-8565/5B(1) NOT 1
BASIC DTD 06 OCT 02
AMEND NR 1 DTD 06 OCT 02
TYPE NUMBER: D8565/5-1
I/A/W SPEC NR QPL-8565-28 NOT 1
REFNO DTD 06 OCT 03
AMEND NR 28 DTD 06 OCT 03
TYPE NUMBER:
PREP FOR DELIVERY
LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS
PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP = 001: PRES MTHD = HM: CLNG/DRY = X: PRESV MAT = 0
WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:
UNIT CONT = ZZ: OPI = O:
INTRMDTE CONT = XX: INTRMDTE CONT QTY = XXX:
PACK CODE = U:
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE: ZZ - Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A
DATED 04090
SUPPLEMENTAL INSTRUCTIONS
32 Type I, shelf life
PACKAGE IAW U.N. REQUIREMENTS ACCORDING
TO THE APPLICABLE MODE OF TRANSPORTATION.
REFERENCE NUMBER: 00004
NSN: 6140014982223
CRITICAL APPLICATION ITEM
BATTERY,STORAGE
SEALED LEAD ACID BATTERY (SLAB)
EXCEPTION DATA:
ITEM IS TO BE MANUFACTURED AND TESTED IAW MIL-PRF-8565 &
MIL-PRF-8565/16.
ITEM WILL BE MARKED WITH THE MILITARY/GOVERNMENT DESIGNATOR "M8565/16-1"
EXCEPTION DATA: NO CONTRACT LOTS SHALL BE
RELEASED FOR SHIPMENT UNTIL LOT ACCEPTANCE
TESTING IS MET AND FINAL APPROVAL IS GIVEN
BY THE QUALIFYING ACTIVITY.
TEST SAMPLES SHALL
NOT BE INCLUDED IN CONTRACT QUANTITY.
SHELF LIFE: TYPE 1, 18 MONTHS
REFERENCE NUMBER: CQC30
REFERENCE NUMBER: CQC04
REFERENCE NUMBER: CQC05
REFERENCE NUMBER: CQSLK
REFERENCE NUMBER: E0189
REFERENCE NUMBER: A0003
REFERENCE NUMBER: Q0106
REFERENCE NUMBER: ZD025
REFERENCE NUMBER: ZD024
SPECS/STD/DRAWINGS:
I/A/W SPEC NR MIL-PRF-8565K NOT 1
BASIC DTD 06 OCT 02
AMEND NR K DTD 06 OCT 02
TYPE NUMBER: M8565/16-1
I/A/W STD NR MIL-STD-129P(4)
REFNO DTD 06 OCT 03
AMEND NR P DTD 06 OCT 03
TYPE NUMBER:
I/A/W STD NR MIL-STD-130N(1)
REFNO DTD 06 OCT 03
AMEND NR N DTD 06 OCT 03
TYPE NUMBER:
I/A/W SPEC NR MIL-PRF-8565/16(1)
REFNO DTD 07 JAN 09
AMEND NR 1 DTD 07 JAN 09
TYPE NUMBER:
PREP FOR DELIVERY
LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS
PKGING DATA - QUP 001:
SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS
MATERIALS PACKAGING REQUIREMENTS.
PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS
SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,
TITLE 49 CODE OF FEDERAL REGULATIONS,
INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)
TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4
OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME
DANGEROUS GOODS CODE (IMDG). BOTH ICAO and IMDG
COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS
ON TRANSPORT OF DANGEROUS GOODS. WHEN A
CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES
SHIPMENT THROUGH A MILITARY AERIAL PORT FOR
TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL
COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS
MATERIALS FOR MILITARY AIR SHIPMENT.
LABELING AND MARKING: ALL INTERIOR AND EXTERIOR
CONTAINERS SHALL BE LABELED AND MARKED AS
SPECIFIED IN THE REFERENCED PRODUCT
SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D
OF THE CONTRACT OR ORDER. IN ADDITION, ALL
LABELING AND MARKING SHALL COMPLY WITH THE
REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,
AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,
IMDG ANNEX 1, AND/OR DLAI 4145.3.
CERTIFICATION: ALL PACKAGING PERFORMANCE TEST
REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES
AND REPORTS ATTESTING TO DATE OF TESTING AND
DATA RESULTS OBTAINED FROM TESTING. THE
CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE
CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,
ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,
SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL
INSPECTION AND RECEIVING REPORT), OR ANY
SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL
CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR
INSPECTION BY AUTHORIZED U. S. GOVERNMENT
REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3
YEARS FROM THE DATE OF SHIPMENT.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,
IN ACCORDANCE WITH FED-STD-313, THE MATERIAL
SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH
ASTM D3951.
******************************************************************************
GLOSSARY
******************************************************************************
PACKAGING TEXT
THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:
For all shipments of packaged materiel to the government,
which includes either Depot (DLA-Direct) or DVD (Customer-
Direct) shipments, both DoD linear and two-dimensional (2D)
bar code markings are required on Military Shipping Labels
in accordance with MIL-STD-129, Revision P, dated December
15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the
requirement for MSL and 2D symbols). See the DLA packaging
web site identified in DLAD 52.211-9010(E) for change
notices to MIL-STD-129P that apply. 2D bar coding shall be
in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3)
and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar
coding shall be in accordance with ISO/IEC 16388. Shipping
label stock quality shall meet MIL-PRF-61002. Bar code print
quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000)
for applicable 2D and/or linear bar codes. All DVD shipments
shall meet additional linear bar coding requirements in DLAD
52.211-9010(C). Except for the Transportation Control Number
(TCN), which must always be present on the Military Shipping
Label, when the contract/order omits any other data elements as
defined in MIL-STD-129P and if the information is not available
from the Administrative Contracting Office, then the field is
not required as part of the Military Shipping Label and may be
left blank. If there are inconsistencies between the schedule
and MIL-STD-129P, the schedule takes precedence.
REFERENCE NUMBER 00004:
IN ADDITION TO THE PACKAGING REQUIREMENTS
INCLUDED IN THE COMMODITY SPECIFICATION LISTED
BELOW, THE SUPPLIES SHALL COMPLY WITH APPLICABLE
PACKAGING REQUIREMENTS OF THE LATEST EDITION OF
THE INTERNATIONAL CIVIL AVIATION ORGANIZATION
(ICAO) TECHNICAL INSTRUCTIONS FOR THE SAFE
TRANSPORT OF DANGEROUS GOODS BY AIR, THE
INTERNATIONAL MARITIME DANGEROUS GOODS CODE
(IMDG CODE), TITLE FORTY-NINE OF THE CODE OF
FEDERAL REGULATIONS (49 CFR), AND AIR FORCE
JOINT MANUAL (AFJMAN) 24-204, PREPARING
HAZARDOUS MATERIALS FOR MILITARY AIR SHIPMENTS.
TO THE EXTENT THAT THERE IS CONFLICT BETWEEN THE
REQUIREMENTS OF THE COMMODITY SPECIFICATION AND
OTHER PACKAGING DATA LISTED BELOW AND THE
REQUIREMENTS OF ICAO AND IMDG, THE PROVISIONS IN
ICAO AND IMDG WILL CONTROL OVER THE CONFLICTING
PROVISIONS IN THE COMMODITY SPECIFICATION AND
OTHER PACKAGING DATA.
UNLESS OTHERWISE SPECIFIED BY THE PROCURING
ACTIVITY, INTERIOR AND EXTERIOR CONTAINERS OF
HAZARDOUS MATERIAL SHALL BE PROPERLY CLASSIFIED,
DOCUMENTED, CERTIFIED, DESCRIBED, PACKAGED,
MARKED, AND LABELED IN ACCORDANCE WITH ICAO,
IMDG, 49 CFR, AFJMAN 24-204, AND MIL-STD-129.
BECAUSE THE ICAO AND IMDG PUBLICATIONS ARE NOT
PUBLISHED BY THE U.S. GOVERNMENT PRINTING
OFFICE, A LIST OF SOURCES, INCLUDING PRIVATE
COMPANIES, WHERE THE PUBLICATIONS MAY BE
OBTAINED IS ALSO PROVIDED. THE COMPANIES CITED
BELOW ARE PROVIDED FOR YOUR INFORMATION AND
MENTION OF THESE COMPANIES DOES NOT INDICATE
ENDORSEMENT BY THE DEFENSE GENERAL SUPPLY
CENTER. THIS LIST IS NOT INCLUSIVE OF ALL
COMPANIES WHICH MAY BE ABLE TO PROVIDE
THESE REQUIRED PUBLICATIONS.
.
LABELMASTER
5724 N. PULASKI ROAD
CHICAGO, IL 60646
1-800-621-5808
.
UNITED NATIONS PUB.
ROOM DC 2-853
NEW YORK, NY 10017
212-963-8302
.
.
UNZ AND COMPANY
190 BALDWIN AVE
JERSEY CITY, NJ 07306
1-800-631-3098.
.
UNIPUB
4611-F ASSEMBLY DRIVE
LANHAM, MD 20706
301-459-7666
.
NEW YORK NAUTICAL INSTRUMENT AND SERVICE
140 W. BROADWAY
NEW YORK, NY 10013
212-962-4522
ALL PERFORMANCE TEST REQUIREMENTS SHALL BE
SUPPORTED BY CERTIFICATES AND REPORTS ATTESTING
TO THE DATE AND DATA RESULTS OBTAINED FROM
PERFORMANCE ORIENTED PACKAGING TESTING. THE
CONTRACTOR AS THE CERTIFIER SHALL BE RESPONSIBLE
FOR PROVIDING TESTING SERVICES. CONTRACTORS
WHICH DO NOT SELF CERTIFY SHALL BE RESPONSIBLE
FOR ASSURING THAT THIRD PARTY SOURCES PROVIDING
PERFORMANCE TESTING SERVICES ARE IN FACT
REGISTERED WITH THE DEPARTMENT OF TRANSPORTATION
(DOT). PERFORMANCE ORIENTED PACKAGING IS
APPLICABLE TO ALL CLASSES OF HAZARDOUS MATERIALS
EXCLUDING RADIOACTIVE MATERIAL, CYLINDERS AND
OTHER RECEPTACLES FOR COMPRESSED GASES,
PACKAGING WITH A NET MASS EXCEEDING 882 POUNDS
AND PACKAGES WITH A CAPACITY EXCEEDING 118.8
GALLONS. ALL CERTIFICATES AND REPORTS SHALL BE
AVAILABLE FOR INSPECTION BY AN AUTHORIZED
GOVERNMENT REPRESENTATIVE FOR A PERIOD OF NOT
LESS THAN 3 YEARS.
ITEM DESCRIPTION TEXT
REFERENCE NUMBER ZQA03:
THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM
(CSI).
ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE
FORWARDED TO THE DSC CONTRACTING OFFICER FOR
REVIEW AND APPROVAL.
.
ALL ITEMS OF SUPPLY SHALL BE MARKED IAW
MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL
BE MARKED WITH LOT AND SERIAL NUMBER (IF
AVAILABLE),
CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S
CAGE CODE AND PART NUMBER.
REFERENCE NUMBER CQC30:
HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT
(GOVERNMENT SPECIFICATION) (APR 1984)
- FAR 52.246-11
.
(A) DEFINITION. "CONTRACT DATE," AS USED IN THIS
CLAUSE, MEANS THE DATE SET FOR BID OPENING OR,
IF THIS IS A NEGOTIATED CONTRACT OR A
MODIFICATION, THE EFFECTIVE DATE OF THIS
CONTRACT OR MODIFICATION.
.
(B) THE CONTRACTOR SHALL IN EFFECT ON THE
CONTRACT DATE, COMPLY WITH THE INTERNATIONAL
ORGANIZATION FOR STANDARDIZATION (ISO) 9001
STANDARD.
REFERENCE NUMBER CQC04:
DLAD 52.246-9003, MEASURING AND TEST EQUIPMENT,
APPLIES.
REFERENCE NUMBER CQC05:
DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION
TESTING,IS HEREBY INCORPORATED,AND MAY BE
INVOKED AT THE DISCRETION OF THE PROCUREMENT
ACTIVITY.
REFERENCE NUMBER CQSLK:
THIS SHELF LIFE ITEM IS NON-EXTENDABLE, CODE K,
WITH A TOTAL SHELF LIFE OF EIGHTEEN MONTHS.
MATERIAL FURNISHED UNDER THIS CONTRACT/ORDER
SHALL HAVE AT LEAST 85% (15 MONTHS) OF THE SHELF
LIFE REMAINING AT TIME OF DELIVERY.
REFERENCE NUMBER E0189:
THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH
MUST MEET QPL/QML REQUIREMENTS. BY SUBMITTING
AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML
COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE
APPLICABLE QPL(S)/QML(S).
REFERENCE NUMBER A0003:
MIL-STD-130N DATED 17 DEC 2007.
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
REFERENCE NUMBER Q0106:
1. SAMPLING FOR INSPECTION AND TESTING SHALL BE
IAW ANSI/ASQ
Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN
MUST BE
APPROVED BY THE PCO. A SAMPLING PLAN THAT
ACCEPTS ON ZERO
DEFECTS IS REQUIRED
2. ANY DEFECTIVE ITEM DISCOVERED DURING
INSPECTION MAY BE CAUSE
FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.
REFERENCE NUMBER ZD025:
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT
CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL
MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON
SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY
NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE
INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND
CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY
OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
REFERENCE NUMBER ZD024:
THE CONTRACTOR SHALL PROVIDE A MATERIAL SAFETY
DATA SHEET (MSDS) AS DIRECTED BY FAR 52.223-3,
HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL
SAFETY DATA (JAN 1997). A COPY OF THE APPLICABLE
HAZARD WARNING LABEL(S) (HWL) SHALL BE SUBMITTED
WITH THE MSDS AS DIRECTED BY DFARS 252.223-7001,
HAZARD WARNING LABELS (DEC 1991). THE MSDS SHALL
BE IAW FEDERAL STANDARD 313 (LATEST REVISION)
AND CONFORM TO OSHA'S HAZARD COMMUNICATION
STANDARD IN TITLE 29 CFR 1910.1200 (LATEST
REVISION) AND SHALL BE SUBMITTED BY THE
APPARENTLY SUCCESSFUL OFFEROR PRIOR TO CONTRACT
AWARD AS DIRECTED BY DLAD 52.223-9000, MATERIAL
SAFETY DATA SHEETS AND HAZARD WARNING LABELS
(NOV 2011). TO SATISFY THE FED-STD-313
REQUIREMENT, THE CONTRACTOR SHALL SUBMIT THE
APPLICABLE MSDS AND HWL TO THE LOCAL
ADMINISTERING AGENCY'S CONTRACTING OFFICE FOR
PROCEDURAL REVIEW AND APPROVAL PRIOR TO CONTRACT
AWARD. CONTRACTOR MUST EXERCISE A DUTY OF CARE
THAT EACH MSDS BE REGULARLY UPDATED (USUALLY
EVERY THREE TO FIVE YEARS) OR WITHIN 3 MONTHS OF
ANY CHANGES PER U.S. CODE, TITLE 42, CHAPTER
116, SUBCHAPTER II, PARAGRAPH 11021(D).
One or more of the items under this acquisition may be subject to Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. Dollars. All interested suppliers may submit an offer.
Award will be made only if the offeror, the product/service of the manufacturer, meets qualification requirement at time of award, in accordance with FAR clause 52.209-1 or 52.209-2. The solicitation identifies the office where additional information can be obtained concerning qualification requirements and is cited in each individual solicitation.
Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.
The solicitation will be available in FedBizOpps on its issue date of September 10, 2013.
Drawings/specifications will be available through the DIBBS solicitation link in the synopsis on the solicitation issue date.
Under this solicitation, the resulting contract(s) will be Fixed-Price with Annual Price Adjustments, Indefinite Quantity Contract(s) issued under FAR Part 15 with a 3-year base period and two 1-year option periods that may be exercised at the discretion of the Government, for a total contract period of five years, if both options are exercised.
This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). Approved sources are Enersys Energy Products, Inc (CAGE 0WY95) and Concorde Battery Corporation (CAGE 63017).
While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.