The US Army Medical Command, Regional Health Contracting Office-Central, Ft. Carson Health Contracting Cell, Fort Carson, CO. is issuing this sources sought synopsis on behalf of Evans Army Community Hospital (EACH) as a means of conducting market research to identify parties that have an interest in and the resources to support this requirement. Vendor will provide Intraocular Lens Implants which meet the salients listed below.

• 1. Monofocal one-piece intraocular lens implant.
Must be aspheric with an Anterior Asymmetric Biconvex Optic
Must be foldable and be able to be injected into the eye with the Monarch III injector
Must be made of acrylic material
Must be available in dioptic power range from +6.0 to +30.0 dioptors in half diopter steps
Must have 0 degrees of haptic angulation
Must be 13.0 mm in length (plus or minus .5 mm)

• 2. Monofocal three-piece Intraocular lens implant
Must be aspheric with an Anterior Asymmetric Biconvex Optic
Must be foldable and be able to be injected into the eye with the Monarch III injector
Must be made of acrylic material
Must have 2 separate haptics that are attached to the lens that have a 10 degree haptic angulation (Plus or minus 1 degree)
Must be available in dioptic power range from +6.0 to +30.0 dioptors in half diopter steps
Must be 13.0 mm in length (plus or minus 0.5 mm)
Must be able to be implanted into the ciliary sulcus (anatomical feature) of the eye

• 3. Monofocal Toric one-piece Intraocular lens implant
Must be aspheric with an Anterior Asymmetric Biconvex Optic
Must be foldable and be able to be injected into the eye with the Monarch III injector
Must be made of acrylic material
Must be available in dioptic power range from +6.0 to +30.0 dioptors in half diopter steps
Must correct astigmatism from 1.50 diopters to 6.00 diopters
Must have 0 degrees of haptic angulation
Must be 13.0 mm in length (plus or minus .5 mm)

THERE IS NO SOLICITATION AT THIS TIME. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred.

If your organization has the potential capacity to perform any of these contract supplies, please provide the following information: 1) Organization name, address, email address, Web site address, telephone number, and size and type of ownership for the organization; and 2) Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational capability.

The government will evaluate market information to ascertain potential market capacity to 1) provide supplies consistent in scope and scale with those described in this notice and otherwise anticipated; and 2) provide supplies under a performance based supplies acquisition contract.

BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/MARKET RESEARCH, THIS REQUIREMENT MAY BE SET-ASIDE FOR SMALL BUSINESSES, PROCURED THROUGH FULL AND OPEN COMPETITION OR SOLE SOURCE. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.

Submission Instructions: Interested parties who consider themselves qualified to perform the above-listed service are invited to submit a response to this Sources Sought Notice by 10:00AM MST,4 Sep 2019. All responses under this Sources Sought Notice must be emailed to [email protected].