SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions.

 

Sources sought for:

VLF Hi-POt (minimum requirements)

- Microprocessor Controlled with programmable test sequences and manual control.
- solid state design
- Provide a seamless wireless connection between Hi-pot and Tan Delta Transducer or Bridge.
- Capable of testing cables to a range of 0-20kVac rms Sinusoidal
- Capable of providing in the range of 28kV to 34kV Peak at DC
- Capable of providing at least 28kV square waves and Sheath Tester
- Operate at test frequences from 0.01Hz to 0.1Hz
- Load ranges for cable lengths to 10,000 ft. Minl, .5uf @ .1Hz, 5.0uf @.01Hz
- Capable of providing metering at peak or RMS Voltages (kV) and Currents (mA)
- Capable of storing test records in non-volatile memory or via USB Port
- Provide PC interface via USB, Wireless, and RS 232/422
- Meet the following cable testing standards: IEEE 400.2-2004, IEEE 400-2001, IEC 60060-3, VDE DIN 0276-620/621, CDNLEC HD 620/621
- POrtable, light weight, <50lbs
- Made in USA

Tan Delta Transducer Bridge (if required by manufacturer)
- Voltage Measurement Range 1-34kV Peak
- Current Measurement Range 0-15mA rms with accuracy of 1% and 1uA
- Load Range Frequency, .1Hz-0.01Hz with accuracy of .0001
- Wireless communications up to 30 meters

Bid Protests Not Available