The United States Coast Guard is considering whether or not to set aside an acquisition for HUBZone concerns, for Service-Disabled Veteran-Owned Small Business Concerns (SDVOSB) or for Small Business. The small business size standard is less than 1,000 employees. The NAICS Code is 336611 and the Product Service Code is J028. The acquisition is for requirements to complete the W6 maintenance Echelon on a MTU 8V TE 94 Diesel Engine and a ZF 255 reduction gear. The performance period will be SIXTY (60) calendar days. The scope of the acquisition is for the requirements to complete the W6 Maintenace Echelon on a MTU 8V 396 TE 94 Diesel Engine and a ZF 255 reduction gear. Work Items List as follows: (1-D) Overhaul Engine, Reduction Gear, and Coupling (6 ea) (1A-O) Overhaul Fuel Injectors (9 ea) (1B-O) Overhaul Cylinder Heads (9 ea) (1C-O) Overhaul Fuel Injector Pump (9 ea) (1D-O) Overhaul Starter Motor (9 ea) (1E-O) Magna Flux and Polish Crankshaft (9 ea) (1F-O) Flush and Re-Plug Crankshaft (9 ea) (1G-O) Magna Flux and Polish Camshafts (9 ea) (1H-O) Overhaul A Bank Turbocharger (9 ea) (1I-O) Overhaul B Bank Turbocharger (9 ea) (1J-O) Overhaul Sea water Pump (9 ea) (1K-O) Overhaul Fresh Water Pump (9 ea) (1L-O) Overhaul Charge Air Cooler (9 ea) (1M-O) Overhaul Oil Cooler (9 ea) (1N-O) Overhaul Oil Pump (9 ea) (1O-O) Overhaul Fuel Hand Prime Pump (9 ea) (1P-O) Measure Connecting Rod Straightness (9 ea) (1Q-O) Magna Flux Connecting Rods (9 ea) (1R-O) Magna Flux Counterweights and Connecting Bolts (9 ea) (1S-O) Overhaul Geislinger Coupling (9 ea) (1T-O) Fabricate new Wooden Box to Enclose Engine (9 ea) (1U-O) Crankcase (5560107206) (9 ea) (1V-O) Oil Pan (5560101112) (9 ea) (1W-O) Crankshaft (X00011496) (9 ea) (1X-O) Connecting Rod (5550302020/42) (9 ea) (1Y-O) Camshaft-LH (5510501001) (9 ea) (1Z-O) Camshaft-RH (5510501101) (9 ea) (1AA-O) Intercooler (0020981420) (9 ea) (1AB-O) Pressure Line AL (5560706936) (9 ea) (1AC-O) Pressure Line A2 (5560707036) (9 ea) (1AD-O) Pressure Line A3 (5560707136) (9 ea) (1AE-O) Pressure Line A4 (5560707236) (9 ea) (1AF-O) Pressure Line B1 (5560707336) (9 ea) (1AG-O) Pressure Line B2 (5560707436) (9 ea) (1AH-O) Pressure Line B3 (5560707536) (9 ea) (1AI-O) Pressure Line B4 (5560707636) (9 ea) (1AJ-O) Gear Pump, Fuel (0030912501) (9 ea) (1AK-O) Pump, Oil 80MM (5561800201) (9 ea) (1AL-O) On-site Technical representative Services for Shipboard Installation (excluding reimbursements, travel and per diem, which will be priced separately after site location is determined) (1AM-O) Overhaul Engine, reduction gear, and Coupling (4 ea) (A-O) Composite Labor Rate (1180 hour) (B-D) GFP Report NSP (C-O) Travel and Per Diem (TBD, based on cutter location) NSP Furnish lead technicians (1) certified to MTU standards CM3/CE3, (2) with prior MTU 396 overhaul experience. All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. At the present time, this acquisition is expected to be issued Full and Open with no set aside. However, in accordance with FAR 19.1305, if your firm is HUBZone certified or 19.1404 if you firm is SDVOSB or 19.501 if your firm is a Small Business and intends to submit an offer on this acquisition, please respond by e-mail to [email protected] or by fax (757) 628-4628. Questions may be referred to Lori Ellis at (757) 628-4646. In response please include the following: (a) a positive statement of your intent to submit a bid for this solicitation as a prime contractor; (b) evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, points of contact and telephone numbers; (c) past performance references with points of contact and phone numbers. At least two (2) references are requested, but more are desirable. Contractors are reminded that should this acquisition become a HUBZone set aside, SDVOSB Small Business or Small Business set aside, FAR 52.219-3, Notice of Total HUBZone Set-Aside or 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside or 52.214-6, will apply, which requires that at least fifty (50) percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other HUBZone small business concerns. Your response is required by 23 March 2010 at 1100 AM EST. All of the above must be submitted in sufficient detail for a decision to be made on a HUBZone, Service-Disabled Veteran-owned Small Business set aside or Small Business set aside. Failure to submit all information requested may result in a small business set-aside. A decision on whether this will be pursued as a HUBZone or SDVOSB small business set aside, or a Small Business set aside, will be posted on the FedBizOps website at http://www.fedbizopps.gov.

Bid Protests Not Available