1. Walk Behind Floor Scrubber VENDOR MUST SUBMIT SPECIFICATIONS OF BRAND/MODEL SUBMITTING BID OFFER ON: ______________________________________________________________________ SPECIFICATIONS: The floor scrubber will be utilized in a simulation training environment (the Shoot House) where non-lethal man marking rounds are fired and must be able to be used in the following conditions: -The Shoot House is 3700 SF with 8 rooms, and 13 doors (36 in standard width) - the floor scrubber must be designed for extreme maneuverability in the existing space with door clearances (actual clearance 33") -The floor is sealed concrete. -The scrubber must be able to remove dirt and dust residue from UTM training rounds that discharge lead dust with minimal staff exposure with contiguous wet sweep and mop and a minimum 24" cleaning path. -The cleaner must include a one touch control panel -The floor cleaner should provide that the floor should be squeegeed or vacuumed as it is cleaned to provide a safe, nearly dry surface following cleaning. -The machine shall be equipped with a tool-free removable brush exchange and interchangeable scrub deck -The machine shall assist the user in the forward motion to reduce fatigue. -Squeegees or vacuum brushes must be removable for cleaning & maintenance purposes. -The cleaning method should allow for the removal of lead dust, preventing it from being lifted back up in the air, so as to eliminate or minimize the amount of employee exposure -The floor cleaner should be walk-behind, battery operated (able to be charged without battery removal), battery charger must be provided and cost included in proposal. -Solution and recovery tanks must be minimum 14.5 gallons -Machine must allow for a hose to fill the solution tank. Solution for the machine (start up supply) must be included in proposal. The solution flow should be automatically turned on or off with the handle activation trigger. -The machine must have a removable recovery tank -Preference is for at least a 5 hour run time, the ability to clean in both forward and reverse -The cleaner must have a kit or adapter that will allow for cleaning in tight spaces like corners of rooms -The machine shall be able to tip back and rest for easy maintenance underneath the unit -The selected floor scrubber must provide for a manufacturer warranty, preferred will be at least 3 year parts, 2 year labor. Warranty & Service Agreement Should Be Submitted with the Bid. -Parts and service / user manual must be provided with the machine. -A full color quick reference operation and maintenance guide that can be posted must come standard with machine -Training for machine use and maintenance must be provided on-site at DOCJT. Training / travel / lodging is to be included in cost of machine. Staff of approximately 15 need to be trained. -Machine must be delivered assembled and ready for use. -Delivery to use site must be included in proposed cost (truck with lift gate, forklift or motorized pallet jack may be required to be provided by vendor - delivery location DOES NOT have a loading dock) Delivery Address : Stone Building, McKinney Skills Drive, Richmond, KY. 40475 DELIVERY TO BE INCLUDED IN BID OFFER Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brands/specifications stated in the solicitation.
Bid Protests Not Available