The Bureau of Engraving and Printing (BEP), Western Currency Facility (WCF), Office of Currency Manufacturing (OCM) Division in Fort Worth, Texas has a requirement for new material handling equipment.  The equipment will be used to turn and jog materials within the building. The acquisition of new equipment will ensure efficiency in the performance of duties required by the OCM Division.

SCOPE OF WORK

• The contractor shall provide all labor, equipment, assembly, materials, management, supervision and other associated services (i.e. delivery, transportation and demonstration) necessary to supply and deliver One (1) Mobile Jogger Equipment (Toppy America Kompressor WB or similar) in accordance with the technical requirements identified in section III below .
• The contractor shall provide on-site operation demonstration of the equipment. The contractor shall provide a final checkup/make-ready after delivery and training to ensure proper functionality. The contractor shall provide at a minimum a one-year warranty.

TECHNICAL REQUIREMENTS

1. Specifications and Performance Requirements: At a minimum, the Contractor shall furnish one (1) Mobile Jogger Unit which meets all the specifications and minimum performance requirements listed below:
2. Motorized and self-propelled.
3. Integrated air-jogger system with air-blower incorporated into machine body.
4. Adjustable air volume controls, speed of air nozzle and intensity of vibration.
5. Air-jogger control pad conveniently located on jogging bar. 
6. Two air nozzles, protected by a steel plate, deliver air to paper for effective conditioning.
7. Jogging system with 2 floating plates.  Each plate has a vibrating motor.  This provides effective jogging of the pile without stressing other components of machine.
8. Piles can be turned with or without applying pressure.
9. Once in position, it can lift and turn the pile in less than a minute.
10. Large double taper bearing system for easy turning of load.
11. Forks traveling on linear bearings for accuracy and longevity.
12. Proven hydraulic system for lifting load, opening, and closing of forks.
13. Does not require installation, permanent electrical connection, or dedicated floor space.
14. Integrated charger can recharge the battery from any 120-volt outlet.
15. Battery can be easily exchanged with optional battery exchanger, for 24-hour continuous operation.
16. Wide base model.